Abstract:The thermal conductivity and stability of nanofluids have posed the biggest challenges to their adoption as coolants in thermal applications in industries such as electronic equipment, heat exchangers, and solar technologies. In this paper, the thermal conductivity coefficient of an Al$_{12}$Mg$_{17}$ nanofluid is measured by a novel beam displacement method. Besides, the stability, particle size distribution (PSD), TEM micrograph, and electrical conductivity of Al$_{12}$Mg$_{17}$ nanofluids are investigated. For the preparation of nanofluids, three different surfactants are used to disperse Al$_{12}$Mg$_{17}$ nanoparticles in DI water using two-step method. Then, dispersion stability is monitored visually and quantified using a zeta potential test. The thermal conductivity coefficient and particle size distribution are measured using two optical setups. For the purpose of evaluating the outcomes, the thermal conductivity coefficients estimated using the beam displacement method are compared with the KD2 Pro apparatus results, and the PSD findings are examined using TEM micrographs. Results demonstrate that a 1:1 ratio of CTAB and Al$_{12}$Mg$_{17}$ nanoparticles is proper for stabilizing Al$_{12}$Mg$_{17}$ nanofluid. Also, the optimum ultrasonication period is determined to be 2 hours, and the peak of particle size distribution is measured to be 154 nanometers at this time. Thermal conductivity measurements show that the thermal conductivity coefficients improve as the concentration of Al$_{12}$Mg$_{17}$ nanoparticles increases, reaching a maximum enhancement of 40% in comparison to the base fluid at a concentration of 0.05 vol.%.

Thermal Conductivity of Al_2O_3-H_2O Nano-Fluid

Research on dispersion characteristics of micron grade Al_2O_3 particle in water phase

Stability and thermal conductivities of hybrid sphere/tube TiO2 nanofluid

Study on Dispersion Behavior and Thermal Conductivity of Cu-H2O Nanofluids

Effects of Particle Surface Charge, Species, Concentration, and Dispersion Method on the Thermal Conductivity of Nanofluids

Investigation on Thermal Properties of Al2O3 Nanofluids

Thermal Conductivity of Al2O3/water Nanofluids

Thermal Conductivity Enhancement Dependent Ph and Chemical Surfactant for Cu-H2o Nanofluids

Studies on Evaluation of the Thermal Conductivity of Alumina Titania Hybrid Suspension Nanofluids for Enhanced Heat Transfer Applications

Dispersion stability and thermal conductivity of propylene glycol-based nanofluids

Thermophysical properties of Al2O3-CuO hybrid nanofluid at different nanoparticle mixture ratio: An experimental approach

Effect of volume concentration and nanofluid temperature on the thermal conductivity of mono and hybrid Al2O3-TiO2 nanofluid

Experimental Study for the Stability Factors of Al2O3nano-fluids with Uniform Design

Thermal Conductivity of Ionic Liquid-Based Nanofluids Containing Magnesium Oxide and Aluminum Oxide Nanoparticles

Measuring Thermal Conductivity of Fluids Containing Oxide Nanoparticles

Thermal Conductivity of Al2O3 and CeO2 Nanoparticles and Their Hybrid Based Water Nanofluids: An Experimental Study

Thermal Conductivity of AlN–Ethanol Nanofluids

Fluid Flow and Heat Transfer Characteristics of Alumina Organic Nanofluid

Thermal conductivity enhancement of water by adding graphene Nano-sheets: Consideration of particle loading and temperature effects

Experimental measurement of thermal conductivity and viscosity of Al 2 O 3 -GO (80:20) hybrid and mono nanofluids: A new correlation

Characterization of Al$_{12}$Mg$_{17}$ Nanofluid By Dynamic Light Scattering and Beam Displacement Methods