Abstract:In this research, an experimental investigation of hybrid nanofluid mixed convection heat transfer characteristics is conducted. The research specifically investigates the effects of percentage weight composition (PWC) of nanoparticles in the hybrid nanofluids on mixed convection heat transfer characteristics along the lamina, transition and turbulent regions. Transition boundaries, thermal entrance effects, and the influence of tube axial position were also critically investigated and analysed experimentally. Three hybrid nanofluids of Al 2 O 3 – MWCNT (i.e., Al 2 O 3 (60%) – MWCNT (40%), Al 2 O 3 (50%) – MWCNT (50%) and Al 2 O 3 (40%) – MWCNT (60%)) were prepared using two-step method and then subjected to a constant heat flux through a horizontal circular copper tube with an internal diameter of 8mm. Results show a significant change in heat transfer characteristics with different PWCs. Al 2 O 3 (60%) – MWCNT (40%) have shown a better heat transfer enhancement among the three fluids investigated. Its Nusselt number has an enhancement of more than 5 % better than the other two fluids. Along the transition regime, critical Reynold numbers (Re cr ) of the three nanofluids were found to have differed slightly, with Re cr = 2020, 2000 and 2100 for Al 2 O 3 (60%) – MWCNT (40%), Al 2 O 3 (50%) – MWCNT (50%) and Al 2 O 3 (40%) – MWCNT (60%) respectively. Mixed convection effects were found to be more significant with Al 2 O 3 (60%) – MWCNT (40%) than with the other two fluids. At the axial position of 63.75, its mixed convection strength (Ὠ) was about 41%, which is the highest among the three fluids. Its strength of mixed convection was also found to deteriorate to about 14.75% with an increase in axial distance from the tube inlet. A similar observation was also noticed with other fluids. Thermal entrance effects were only found to be significant at x/d = 15 and 31.25, as their influence diminishes with an increased x/d distance from the tube inlet. It was concluded that both mixed convection and thermal entrance effects resulted in heat transfer enhancement, especially in the lamina region. Their influences decrease with an increase in axial distance from the tube inlet. Mixed convection influences were only present in the lamina and transition region, and their strength was reduced with an increase in Reynold number and axial position.

Effect of volume concentration and nanofluid temperature on the thermal conductivity of mono and hybrid Al2O3-TiO2 nanofluid

Stability and thermal conductivities of hybrid sphere/tube TiO2 nanofluid

Studies on Evaluation of the Thermal Conductivity of Alumina Titania Hybrid Suspension Nanofluids for Enhanced Heat Transfer Applications

Thermophysical properties of Al2O3-CuO hybrid nanofluid at different nanoparticle mixture ratio: An experimental approach

Solidification Behavior of Hybrid Tio2 Nanofluids Containing Nanotubes and Nanoplatelets for Cold Thermal Energy Storage

An intelligent approach to predicting the effect of nanoparticle mixture ratio, concentration and temperature on thermal conductivity of hybrid nanofluids

Experimental measurement of thermal conductivity and viscosity of Al 2 O 3 -GO (80:20) hybrid and mono nanofluids: A new correlation

Study on thermal conductivity of water-based nanofluids with hybrid suspensions of CNTs/Al2O3 nanoparticles

Thermal Conductivity of Al2O3 and CeO2 Nanoparticles and Their Hybrid Based Water Nanofluids: An Experimental Study

Experimental measurement of viscosity and electrical conductivity of water-based γ-Al2O3/MWCNT hybrid nanofluids with various particle mass ratios

Measurement of thermal conductivity of ZnO–TiO2/EG hybrid nanofluid

Thermal Performance of Hybrid-Inspired Coolant for Radiator Application

Heat transfer characteristics of plate heat exchanger using hybrid nanofluids: effect of nanoparticle mixture ratio

Experimental investigations of effects of nanoparticle size on force convective heat transfer characteristics of Al 2 O 3 - MWCNT hybrid nanofluids in transitional flow regime

Dispersion stability and thermal conductivity of propylene glycol-based nanofluids

Thermal analysis of hybrid nanofluids inside a microchannel heat exchanger for electronic cooling

Investigation on Thermal Properties of Al2O3 Nanofluids

Mixed Convection Heat Transfer Characteristics of Al 2 O 3 – MWCNT Hybrid Nanofluid under Thermally Developing Flow; Effects of Particles Percentage Weight Composition

Investigating the thermal performance of a hybrid Ag-TiO 2 /water nanofluid in a copper porous nanochannel: Examine the meshless molecular dynamics simulation

Effects of Particle Surface Charge, Species, Concentration, and Dispersion Method on the Thermal Conductivity of Nanofluids

Influence of Nanoparticles on Thermophysical Properties of Hybrid Nanofluids of Different Volume Fractions