Abstract:High temperature looping cycles, such as carbonation-calcination cycles based on calcium sorbents or chemical looping combustion are being developed and play an essential role in CO2 capture technologies. Among proposed configurations, outstanding schemes make use of a number of interconnected fluidized beds and may operate at bubbling or circulating regime. Fluidized bed behaviour is well-known since they are included in many industrial applications, such as power plants and chemical industries. However, there is a lack of knowledge about their operation when more than one fluidized bed are coupled in the same system.One promising configuration for Ca-based sorption looping systems relies on the use of two circulating beds as carbonator and calciner and two bubbling beds acting as loop-seal valves. Many theoretical and lab experimental studies point out the need of large solid circulation in the system to reach high carbonation efficiencies. The control of this flow in complex CFB looping systems, where also internal recirculation exists in the risers, becomes a difficult task and deserves further studies to characterize them. The challenge to solve, through experimental tests and mathematical modelling, is finding a comprehensive control method to operate two circulating beds in turbulent regime and two bubbling sealing devices. Experimental results supporting high carbonation efficiency or feasibility in scaling-up solid circulation rates and inventories are needed to make the system more reliable.A lab-scale cold flow facility has been designed based on Glicksman's scaling rules and constructed in order to conduct experimental tests. The mechanical design of the facility and the choice of solid material, fluidizing gas and operating conditions should be such as to ensure the circulation of solids between reactors and the presence of solids inventory in the carbonator which are necessary to achieve high capture efficiencies.Operation of the system has been tested for a long number of hours under very different conditions. Measurements of circulation rate, static pressure, voidage profiles and standpipe height of solids have been used to identify trends in the hydrodynamic behaviour of the whole system while varying gas velocities in the risers, loop-seals, inventories in the reactors or size distribution of the particles. The circulation rates attained in the cold flow plant are comparable, after scaling-up, to solid flows in the loop which lead to high enough carbonation efficiencies of the system. (C) 2010 Elsevier Ltd. All rights reserved

Optimizing make-up flow in a CO2 capture system using CaO

Comparative Study of Optimized Purge Flow in a CO2 Capture System Using Different Sorbents

Hydrodynamical Model and Experimental Results of a Calcium Looping Cycle for CO2 Capture

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Economical Assessment of Competitive Enhanced Limestones for Co2 Capture Cycles in Power Plants

Process Analysis of CO2 Capture from Flue Gas Using Carbonation/calcination Cycles

The Calcium-Looping Technology for Co2 Capture: on the Important Roles of Energy Integration and Sorbent Behavior

Carbonate Looping Cycle for Co2 Capture: Hydrodynamic of Complex Cfb Systems

Operation of a Mixing Seal Valve in Calcium Looping for CO2 Capture

Integration of Carbonate CO2Capture Cycle and Coal-Fired Power Plants. A Comparative Study for Different Sorbents

The Moxy-Cal Process: Integration of Membrane Separation, Partial Oxy-combustion and Calcium Looping for CO2 Capture

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO_2 Capture

Experiment and Modeling of Co2 Capture from Flue Gases at High Temperature in A Fluidized Bed Reactor with Ca-Based Sorbents

Development and performance of CaO/La2O3 sorbents during calcium looping cycles for CO2 capture

Energy Intensity Reduction of Ca-Looping Co2 Capture by Applying Mixing Loop Seals and Cyclonic Systems

The Oxy-CaL process: A novel CO2 capture system by integrating partial oxy-combustion with the Calcium-Looping process

Oxyfuel carbonation/calcination cycle for low cost CO2 capture in existing power plants

Cost Structure of a Postcombustion CO2 Capture System Using CaO

CO2 Capture Performance of CaO-Based Sorbents Prepared by a Sol–Gel Method

Combined Carbon Capture Cycles: an Opportunity for Size and Energy Penalty Reduction

NO removal performance of CO in carbonation stage of calcium looping for CO2 capture