Abstract:Woven wire mesh is a metallic fabric outperforming traditional metal sheets in air circulation, weight saving, impact resistance, etc. In this study, the dynamic mechanical response of steel wire mesh subjected to low-velocity impact loading was investigated using both experimental and numerical methods. An instrumented drop-weight impact facility was used for experimental impact tests, with the effects of clamping wire direction, impact energy, impactor’s mass and size being considered. The extents of damage to the wire mesh specimens under different loading conditions were evaluated after impact tests. Three types of contact force vs. displacement curves corresponding to the plastic deformation, wire breakage, and perforation of wire mesh were identified. Weft wires were found to be stronger and stiffer than warp wires because they could resist higher peak forces and experienced smaller maximum displacements under the same impact energies. The experimental results revealed that the peak contact force increased with impact energy until wire breakage occurred, after which the peak force remained almost unchanged. With the increase of impactor mass, wire mesh specimens experienced severer damage due to the inertia effect and strain rate effect. Impactor size had a significant influence on the dynamic response of wire mesh; a great increase in peak contact force was found when using a larger impactor tip. Moreover, a mesoscale finite element model was developed to analyse the propagation of stress and the evolution of dynamic failure in wire mesh during impact. The simulation results showed that more than 80% of the impactor’s kinetic energy was absorbed through the deformation and failure of wire mesh, while the frictional energy dissipation accounted for about 10% of impact energy.

Structure Deformation and Failure of Sintered Steel Wire Mesh under Torsion Loading

Numerical Exploration Of The Defect'S Effect On Mechanical Properties Of Nanowires Under Torsion

The Influence of Crystal Defects on the Elastic Properties of Tungsten Metals

Stress Intensity Factors for Cracked Cold-drawnSteel Wires under Tensile Loading

High deformation and delamination mechanisms explained through mesoscale and nanoscale phenomena in pearlitic steel wires

On the mechanical behaviour of steel wire mesh subjected to low-velocity impact

Fretting fatigue behavior of helical-torsional contact steel wire in wire rope

Microstructural Evolution, Strengthening Mechanisms and Strength Structure Relationship in Cold-Drawn Pearlitic Steel Wire

Dislocation-Based Plasticity and Strengthening Mechanisms in Sub 20 Nm Lamellar Structures in Pearlitic Steel Wire

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Mechanical Enhancement and Weakening in Mo6S6 Nanowire by Twisting

Formation and effects of banded structures in 55SiCrA spring steel wire rod

Analysis of the Causes of Fracture of Hard Wire from High-Carbon Steel 65C

Nanocrystallization Enabled Tensile Ductility of Co-Based Amorphous Microwires

Three-dimensional modeling of the mechanical tensile behavior of metal weft-knitted fabric made from NiTi wire

Effect of Microstructure and Microtexture on the Mechanical Properties of Small-Strain Cold-Drawn Pearlite Steel Wires

Deformation and failure by weaving dislocation networks in body-centered-cubic tungsten

Shear deformation characteristics under tensile stress during forming of tubular braided fabrics

Microstructure, mechanical behaviour and fracture of pure tungsten wire after different heat treatments

Characterization of the Microstructure in Drawn Pearlitic Steel Wires

Study on stiffness distribution and failure mechanisms of the twisted profiled textile composite structure under cantilever load