Abstract:The purpose of this study is to experimentally and numerically investigate thermal and residual deformations of plastic ball grid array (PBGA) package and assembly. In the experiments, a full-field shadow moire with a sensitivity of 29.2 mum/fringe is used for measuring their real-time out-of- plane deformations (warpages) during heating and cooling conditions. The elastic moduli (Es) and coefficients of thermal expansion (CTEs) for epoxy molding compound (EMC) and organic substrate are measured in terms of temperatures by dynamic mechanical analyzer (DMA) and thermo-mechanical analyzer (TMA), respectively. And a finite element method with the input of these measured material properties is employed to numerically simulate the thermally-induced deformations of them, in order to understand the insight of mechanics. The full-field warpages of the PBGA package and assembly from shadow moire were documented during the temperature cycling (from room temperature to 220degC). It is interesting that the maximum warpages with concave shape for both the package and assembly occur at near 155degC during this thermal cycling, (rather than with convex shape at room temperature by assuming the warpage-free (or stress-free) temperature is at 175degC of molding). This issue has been resolved through the finite element analyses by cooperating with the residual strain (stress) in the EMC of the package, which is obtained by measuring the residual and thermal deformations of the detached EMC/die bi-material structure. This residual strain of the EMC maybe comes either from the chemical shrinkage of the EMC curing, or more possible stress relaxation of the EMC during the first solder reflow of attaching the solder balls. Furthermore, the thermal deformations for both the package and assembly were fully addressed by the finite element models. Both consistent results indicate that the more severe coplanarity with the value of about 275 mum at the corner of the substrate with the size of 40 times 40 times 1.7 mm occurs at near 155degC, due to the Tg and residual strains of the EMC, rather than at the room temperature. This severe coplanarity can be mitigated by lowering the residual shrinkage strain. And the warpage of the PBGA assembly coincides with the package at the temperature beyond 155degC (highly resulting from apparent creep of the solder balls), but is larger than that of the package below 155degC, due to constraint of the PCB through less-pronounced creep solder balls.

Thermomechanical Behaviour of Pbga Package During Laser and Hot Air Reflow Soldering

Numerical Simulation on Temperature Distribution of PBGA Package during Laser Reflow Process

Study on Laser and Hot Air Reflow Soldering of PBGA Solder Ball

Laser Rework Process for Efficient Lead-Free Solder Joints Ball Grid Array (BGA) Component Rework

Research Status and Application of Laser Reflow on Solder Bump Forming of Area Array Packages

Thermal performance of lead-free microelectronic BGA package with defects

Interfacial Reaction Between Pbga Solder Ball and Au/Ni/Cu Pad During Laser Reflow

Design of Laser Scanning Solder,Bumping System

Comparison between Experimental Measurement and Numerical Analysis of Warpage in PBGA Package and Assembly with the Consideration of Residual Strain in the Molding Compound

Oxygenous reflow affecting performance of Pb-free TFBGA assembly

Simulation analysis of residual stress of BGA solder joints after reflow soldering based on element birth and death technology

Intermetallic Compounds Formation at Interface Between Pbga Solder Ball and Au/Ni/Cu/Bt Pcb Substrate after Laser Reflow Processes

Interaction Kinetics Between Pbga Solder Balls and Au/Ni/Cu Metallisation During Laser Reflow Bumping

Reflow of Lead-Free Solder by Microwave Heating

An investigation of reliability of solder joints in microelectronic packages by high temperature moiré method

Numerical simulation of thermo-mechanical behavior in high power diode laser arrays

Thermal Stress Measurement of Solder Joints in Bga Packages: Theoretical and Experimental

Thermo‐mechanical behavior of ball grid packages with different solder ball grid patterns investigated through moiré interferometryThermomechanisches Verhalten von Kugelgitterpackungen mit unterschiedlichen Lotkugelgittermustern, untersucht durch Moiré‐Interferometrie

Laser Soldering of Sn-based Solders with Different Melting Points

Evolution Of Intermetallic Compounds At Interface Between Pbga Solder Ball And Pads During Laser Reflow Soldering

Evaluation of Nonintrusive Active Infrared Thermography Technique to Detect Hidden Solder Ball Defects on Plastic Ball Grid Array Components