Abstract:Acetylene (C2H2) plasma immersion ion implantation and deposition (PIII-D) was performed on polyethylene terephthalate (PET) at different bias voltages from -5KV to -15KV. The surface structure of the treated PET is determined by Rutherford backscattering spectrometry (RBS), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The results show the formation of thin hydrogenated amorphous carbon (a-C:H) films with different structures and chemical bonds on the PET surface. Atomic force microscopy (AFM) shows that the reduced average surface roughness (R a) decreases from 33.1 nm to 11.4 nm by depositing the amorphous carbon film. The wettability of the films is investigated by contact angle measurement. After C2H2 PIII-D, the surface energy increases from 43.3 mN/m to 47.1 mN/m and the ratio of polar component γp to dispersive component γd increases from 0.06 to 0.35. Platelet adhesion and coagulation factor experiments are conducted to examine the blood compatibility in vitro. Scanning electron microscopy (SEM) and optical microscopy reveal that the amounts of adhered, aggregated and morphologically changed platelets are reduced on all amorphous carbon films. The number of platelet adhered on the amorphous carbon film deposited under -10 KV is reduced by almost 75% compared to the amount of platelets on the untreated film. The thrombin time (TT), prothrombin time (PT) and activated partial thromboplastin time (aPTT) of the modified PET are longer than those of the untreated PET. Our result thus shows that the amorphous carbon film deposited on the PET surface by C2H2 PIII-D improves platelet adhesion and activation. A possible reason for the good hemocompatibility is that the amorphous carbon coating minimizes its interactions with plasma protein and slightly changes the conformation of adsorbed plasma proteins.

Blood Compatibility of Chitosan Immobilized on Poly(Ethylene Terephthalate) Surface Modified by Plasma and Ultraviolet Grafting

Surface Characterization and Antibacterial Evaluation of Poly(Ethylene Terephthalate) Modified by Chitosan-Immobilization

Hemocompatibility of Pet (polyethylene Terephthalate) Films Grafted Peg (polyethylene Glycol) by Plasma Surface Modification

Ozone-Induced Immobilization of Chitosan and Heparin on Polyethylene Terephthalate Films to Improve Antithrombogenic Properties

Research of Plasma Adsorption and Action of Platelet Adhesion of Dacron Modified by Plasma Surface Modification

Introduction of Photocrosslinkable Chitosan to Polyethylene Film by Radiation Grafting and Its Blood Compatibility

Surface modification of poly(ethylene terephthalate) via hydrolysis and layer-by-layer assembly of chitosan and chondroitin sulfate to construct cytocompatible layer for human endothelial cells.

Modification of chitosan membrane with poly(vinyl alcohol) and biocompatibility evaluation

Blood Compatibility of Polyethersulfone Membrane by Blending a Sulfated Derivative of Chitosan

Hemocompatibility evaluation of polyurethane film with surface-grafted poly(ethylene glycol) and carboxymethyl-chitosan

Surface Modification Using Photocrosslinkable Chitosan for Improving Hemocompatibility.

Chemical graft polymerization of sulfobetaine monomer on polyurethane surface for reduction in platelet adhesion.

The effect of amorphous carbon films deposited on polyethylene terephthalate on blood compatibility

Plasma graft polymerization of Acrylic Acid and immobilization of Heparin to improve blood compatibility of Polyethylene terephthalate (PET).

Modification of Polycarbonateurethane Surface with Poly (ethylene Glycol) Monoacrylate and Phosphorylcholine Glyceraldehyde for Anti-Platelet Adhesion

Covalent Immobilization of Chitosan and Heparin on PLGA Surface

Surface Modification of Polycaprolactone Membrane Via Layer-By-Layer Deposition for Promoting Blood Compatibility

On blood compatibility of polyethylene terephthalate films modified with L-arginine

Biomimetic surface modification of polycarbonateurethane film via phosphorylcholine-graft for resisting platelet adhesion

Modification of Hydrophilic Property of Polypropylene Fiber Film with Water-Soluble Chitosan for Improvement of Blood Compatibility