Abstract:This paper presents the experimental investigation on the internal working process especially the internal leakage of a rotary vane expander prototype, which was developed to replace the throttling valve to improve the Coefficient of Performance (COP) of the transcritical CO2 refrigeration cycle. The pressure diagram as a function of the rotation angle (p–θ diagram) was recorded by two pressure sensors arranged within the expansion chamber, based on which the features of the working process were analyzed and effects of the some improvement measures on the internal leakage were discussed. Compared with the ideal p–θ diagram, the recorded diagrams presented more rapid decrease in the pressure during expansion process, which was attributed to serious leakage within the expander. Further analysis of the recorded p–θ diagrams showed that three adjacent vanes instead of two formed an integrated working chamber, which implied that the in-between vane did not contact the cylinder wall at all, and this guess was proved by the high speed video recording of the running rotor together with the vanes during operation of the expander in CO2 system. By arranging springs in the vane slots, tight contact between the vanes and the cylinder wall was ensured and hereby the working process was improved. The gap between the suction and discharge ports was another important leakage path and installation of a seal there could increase the pressure difference through the expander by 1.5–2.5MPa by decreasing the leakage directly from the high-pressure suction chamber to the low-pressure discharge chamber. Performance test of the modified expander prototype with springs in the slots and seal at the seal arc showed that the volumetric efficiency increased from 17% to 30% and the isentropic efficiency from 9% to 23% at the speed of 800rpm.

Modeling and Experimental Investigation on the Vane Friction in a Rotary Vane Expander

A study of the vane dynamics in a rotary vane expander for the transcritical CO<sub>2</sub> refrigeration cycle

Modeling and Experimental Investigation on the Internal Leakage in a CO2 Rotary Vane Expander

Experimental Investigation on the Thermodynamic Performance of a Rotary Vane Expander in the Air System

Study of a Rotary Vane Expander for the Transcritical CO 2 Cycle—Part II: Theoretical Modeling

Friction Characteristics of Sliding Vane for Synchronal Rotary Compressor

Study of A Rotary Vane Expander for the Transcritical Co2 Cycle-Part I: Experimental Investigation

An Effective Method for Improving the Lifetime of Double Acting Vane Pump

Investigation on the Rotary Vane Expander by Introducing High Pressure into Vane Slots

Analysis, modeling and simulations of an innovative sliding vane rotary compressor with a rotating cylinder

Experimental investigation on the internal working process of a CO2 rotary vane expander

A Theoretical Study on the Novel Structure of Vane Compressor for High Efficiency

Theoretical Study on Frictional Losses of A Novel Automotive Swing Vane Compressor

Experimental Research on Internal Working Process of Rotary Vane Expander in CO2 Refrigeration System

Lubrication and Fluid Film Study on the Vane Tip in a Vane Pump Hydraulic Transmission Considering a Fluid and Structure Interaction

Dynamic modeling and characteristics analysis of sliding vane in a high-speed rotary compressor considering groove distribution and multi-body coupling

Experimental Study on the Influence of the Rotating Cylinder Block and Pistons on Churning Losses in Axial Piston Pumps

Theoretical Research on Dynamic Characteristic of Rotary Vane Expander

Modeling and Analysis of the Churning Losses Characteristics of Swash Plate Axial Piston Pump

Effects of the Friction Coefficient on the Torque Characteristics of a Hydraulic Cam-Rotor Vane Motor

Improved Rotary Vane Expander for Trans-Critical Co2 Cycle by Introducing High-Pressure Gas into the Vane Slots