Abstract:High heat fluxes generated in electronics and semiconductor packages require materials with high thermal conductivity to effectively diffuse the heat and avoid local hotspots. Engineered heat spreading materials typically exhibit anisotropic conduction behavior due to their composite construction. The design of thermal management solutions is often limited by the lack of fast and accurate characterization techniques for such anisotropic materials. A popular technique for measuring the thermal diffusivity of bulk materials is the Ångstrom method, where a thin strip or rod of material is heated periodically at one end, and the corresponding transient temperature profile is used to infer the thermal diffusivity. However, this method is generally limited to the characterization of one-dimensional samples and requires multiple measurements with multiple samples to characterize anisotropic materials. Here, we present a new measurement technique for characterizing the isotropic and anisotropic in-plane thermal properties of thin films and sheets as an extension of the one-dimensional Ångstrom method and other lock-in thermography techniques. The measurement leverages non-contact infrared temperature mapping to measure the thermal response from laser-based periodic heating at the center of a suspended thin film sample. Uniquely, our novel data extraction method does not require precise knowledge of the boundary conditions. To validate the accuracy of this technique, numerical models are developed to generate transient temperature profiles for hypothetical anisotropic materials with known properties. The resultant temperature profiles are processed through our fitting algorithm to extract the in-plane thermal conductivities without knowledge of the input properties of the model. Across a wide range of in-plane thermal conductivities, these results agree well with the input values. Experiments demonstrate the approach for a known isotropic reference material and an anisotropic heat spreading material. The limits of accuracy of this technique are identified based on the experimental and sample parameters. Further standardization of this measurement technique will enable the development and characterization of engineered heat spreading materials with desired anisotropic properties for various applications.

A Novel Time-Integral Type Laser Energy Meter Based on Anisotropic Seebeck Effect

YBa2Cu3O7-δ Thin Film Room-temperature Laser Power Meter

Laser Detectors Based On Atomic Layer Thermopile Materials

A Real-Time Energy Meter for Medical Excimer Laser

Novel Semiconductor Lasers and Integrated Photonic Devices

Temperature Stability of Laser Induced Thermoelectric Voltage Signal in Colossal Magneto Resistance Thin Films

A New Laser-Combined H-Type Device Method for Comprehensive Thermoelectrical Properties Characterization of Two-Dimensional Materials

Theory and experiment study of micro/nano photothermal expansion

Laser Induced Thermoelectric Voltage of Atomic Layer Thermopile Materials

Laser-induced Thermoelectric Voltage Effect of Sr_2FeMoO_6 Film

Figure of Merit for Detectors Based on Laser-Induced Thermoelectric Voltages in La1−xCaxMnO3 and YBa2Cu3O7−σ Thin Films

Time Dependence of Laser-Induced Thermoelectric Voltages in La1−xCaxMnO3 and YBa2Cu3O7−δ Thin Films

A microscale nanosecond time-resolved platinum thermometer probing Gaussian pulsed laser induced temperature

Optimum Thickness for Laser Induced Thermoelectric Voltage Effect in High T-C Superconductor and Cmr Thin Film

Transverse laser induced thermoelectric voltage effect in tilted La0.5Sr0.5CoO3 thin films

Antithermal Quenching and Multiparametric Temperature Sensing from Mn2+/Tb3+‐Codoped Ca2LaTaO6 Phosphor

Ultra-High-Sensitivity and -Stability Thin-Film Heat Flux Sensor Based on Transverse Thermoelectric Effect

A laser-based Ångstrom method for in-plane thermal characterization of isotropic and anisotropic materials using infrared imaging

Integrated Fiber Ring Laser Temperature Sensor Based on Vernier Effect with Lyot-Sagnac Interferometer

Laser Co-Ablation of Bismuth Antimony Telluride and Diamond-Like Carbon Nanocomposites for Enhanced Thermoelectric Performance

Growth and Laser Induced Thermoelectric Voltages Effect of the c-Axis Oriented Thermoelectric Ca3Co4O9 Thin Films on Sapphire Substrates