Abstract:Thermoelectric (TE) materials capable of directly converting heat into electricity have become a highly potential category in energy materials and are expected to tackle the energy issue of the future. Among a variety of TE materials, lead telluride (PbTe) has been recognized as an outstanding mid-temperature TE material with an applicable TE figure of merit (ZT) of ~1.2. However, due to the toxicity of both Pb and Te, development of alternative mid-temperature TE materials is urgently required. Bismuth sulﬁde (Bi2S3) is specially selected in the present study as the most promising candidate for alternating PbTe mainly because of its potentially high Seebeck coefficient (102−103 μVK-1). Unfortunately, the generally poor electrical conductivity (<102 S/cm) and the resulting low ZT (~0.2) of Bi2S3 severely restrict its applicability. In this work, by controlling the substrate temperature, the volatility of sulfur would lead the compositional deviation from the chemical stoichiometry of Bi2S3 and the electrical conductivity of the sulfur-vacancy introduced Bi2S3-x would thus be improved. Similarly, BiCl3 was also considered and applied as a donor dopant to improve the electrical conductivity. Furthermore, a series of novel BiCl3 doped Bi2S3-Cu nanoparticles layer-by-layer composite films were designed and fabricated through the newly built dual-beam pulsed laser deposition for improving the electric conductivity without seriously sacrificing the Seebeck coefficient. The prepared highly crystalline intrinsic Bi2S3 films on insulated SiO2/Si substrates exhibit a very high electric conductivity of 638 Scm-1 evidently due to the simultaneously enhanced carrier concentration and mobility, and the Seebeck coefficient of - 453 μVK-1. The resulting power factor is 137 μWcm-1K-1 which is four times higher than the reported highest value (29 μWcm-1K-1) from the chemically prepared Bi2S3 so far. The introduction of BiCl3 into Bi2S3 indeed leads to an enhancement of the electrical conductivity from 170 Scm-1 (before BiCl3 doping) to 450 Scm-1 whereas the Seebeck coefficient decreases from -522 μVK-1 to -221 μVK-1. On the sake of enhancing the electricity conductivity and Seebeck coefficient simultaneously, the Cu nanoparticles were introduced into the BiCl3 doped Bi2S3 film. The heterostructure of Cl doped Bi2S3/Cu played an important role in obtaining the high electrical conductivity of 715 Scm-1, Seebeck coefficient of -413 μVK-1 and the power factor of 122 μWcm-1K-1 which is twice higher than those of the intrinsic Bi2S3 film (49 μWcm-1K-1).

Laser Co-Ablation of Bismuth Antimony Telluride and Diamond-Like Carbon Nanocomposites for Enhanced Thermoelectric Performance

Periodic DLC Interlayer-Functionalized Bi–Sb–Te-Based Nanostructures: A Novel Concept for Building Heterogenized Superarchitectures with Enhanced Thermoelectric Performance

Enhanced Thermoelectricity of Three-Dimensionally Mesostructured BixSb2-xTe3 Nanoassemblies: from Micro-Scaled Open Gaps to Isolated Sealed Mesopores.

Pulsed Laser Deposition of BiCl3 Doped Bi2S3/Cu Nanoparticle Composite Films for Thermoelectric Applications

Great Enhancements in the Thermoelectric Power Factor of BiSbTe Nanostructured Films with Well-Ordered Interfaces

Enhanced thermoelectric performance of Bi0.3Sb1.7Te3 based alloys by dispersing TiC ceramic nanoparticles

Nanostructuring and band engineering boosting thermoelectric performance of Bi-Sb-Te alloys via CsBr doping

Laterally Assembled Ga2Te3/In2Te3 Hetero-Nanostructures for Thermoelectric Applications

Self-assembled bismuth telluride films with well-aligned zero- to three-dimensional nanoblocks for thermoelectric applications

Nano‐ and Micro‐Structures Formed during Laser Processing of Selenium Doped Bismuth Telluride

Enhanced Electrical Properties of Bi2−xSbxTe3 Nanoflake Thin Films Through Interface Engineering

BiSbTe-based nanocomposites with high ZT: The effect of SiC nanodispersion on thermoelectric properties

Compositional Fluctuations Mediated by Excess Tellurium in Bismuth Antimony Telluride Nanocomposites Yield High Thermoelectric Performance

Ultralow lattice thermal conductivity and enhanced power generation efficiency realized in Bi2Te2.7Se0.3/Bi2S3 nanocomposites

High Thermoelectric Performance Via Hierarchical Compositionally Alloyed Nanostructures.

Realizing high thermoelectric performance in Te nanocomposite through Sb2Te3 incorporation

Optimized Hetero-Interfaces by Tuning 2d Sns2 Thickness in Bi2te2.7se0.3/Sns2 Nanocomposites to Enhance Thermoelectric Performance

Significant Enhancement of Thermoelectric Figure of Merit in BiSbTe‐Based Composites by Incorporating Carbon Microfiber

Enhancement of Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3 Particulate Composites Including Ferroelectric BaTiO 3 Nanodots

Enhanced performance of thermoelectric nanocomposites based on Cu12Sb4S13 tetrahedrite

Organic/Inorganic Hybrid Design as a Route for Promoting the Bi<sub>0.5</sub>Sb<sub>1.5</sub>Te<sub>3</sub> for High-Performance Thermoelectric Power Generation