Abstract:In this study, our primary aim was to increase the presence of amine groups in polyamide 6 fibers. To achieve this, we employed a functionalization process that mainly depended on increasing the number of reactive sites via acid-catalyzed hydrolysis. The effects of several acids were rigorously examined, including hydrochloric acid (HCl), sulfuric acid (H2SO4), and formic acid (HCOOH). Following this comprehensive acid-based treatment, the method that demonstrated the most significant increase in amine groups was selected for further evaluation in dyeing experiments and full characterization. The quantification of amino groups was performed using potentiometry, evaluating the equilibrium state of acid removal from the fibers. To corroborate these results, the acid dye Levaset Blue 2R was employed, which measured the amount of dye bound to the fibers during the dyeing process. Characterization of the polyamide 6 fiber structural changes was conducted using multiple techniques, including tensile tests, Fourier transform infrared (FTIR) spectroscopy, and differential scanning calorimetry (DSC). Among the acid treatments, the 11% HCl treatment exhibited the most significant increase in amine groups, amounting to an approximately 110% increase as measured by potentiometry and an approximately 150% increase using the dyeing method. During the dyeing process, the 11% HCl-treated fibers absorbed 91% of the dye from the dye bath, indicating enhanced color intensity and K/S value, thus affirming the efficacy of the amine group increasing. Tensile testing revealed a decrease in the strength of the functionalized fiber. In the FTIR spectra, there was a notable increase in the intensity of bands associated with the fiber's crystalline regions and hydrogen bonds. DSC tests validated the FTIR results, demonstrating a 9% increase in crystallinity. Furthermore, SEM micrographs depicted surface alterations induced by the hydrolysis process. These results collectively highlight the effectiveness of hydrolysis in introducing functional groups, enhancing color intensity during dyeing with acid dyes, and reducing dye content in the bath. Additionally, the potentiometric method for quantifying amine group demonstrated practicality and accuracy, serving as a valuable contribution to the field.

Nylon dyeing with a new acidifier NSZ

Advances in Dyeing Technologies for Polyacrylnitrile

Some Experiments on the Dyeing of Nylon Yarn

Excellent fixation and color fastness of nylon fibers dyed with low-water-soluble reactive dyes based on the reactivity and stability of vinyl sulfone

Effect of Dyeing and Finishing Reagents on Flame Retardant Property of Anti-fcell Flame Retardant Viscose Fiber

The dyeing of supermicrofibre nylon with acid and vat dyes

Study on the Acid Resistant Properties of Bio-Based Nylon 56 Fiber Compared with the Fiber of Nylon 6 and Nylon 66

Excellent fixation of low-water-soluble reactive dyes containing vinylsulfone group for nylon dyeing

Synthesis and application of a fixing agent applied to acid dyes

Study of the Effects on Multifunctionality of Treating Nylon with a Mixed Sol

A Facile and Eco-Friendly Strategy to Prepare Synthetic Syntans for After-Treatment of Dyed Nylon Fabrics

Investigation of stain-resistant cationic dyeable nylon 6 modified with sodium salt of 5-sulfoisophthalic acid and polyethylene glycol

Ultrasonic dyeing of polylatic acid blended fabric

Melting-reactive dyes for mass coloration of synthetic fibres (II)—1,4-dihydroxyanthraquinone diglycidyl ether in nylon

Dyeing Nylon-6 Fabric with New 2-Chloro-N-(4-Aryl-5-Arylazo-Thiazol-2-Yl)-Acetamide Dyes in Supercritical Carbon Dioxide

Studies on Crosslinking Dyeing of A Series of Crosslinking Dyes by A Crosslinker

Application of one-bath scouring and dyeing deoiling agent JY9700T in one-bath dyeing of polyester fabric

Melting-Reactive Dyes for Mass Coloration of Nylon Based on Blend Compatibilization: Perylene-3,4,9,10-Tetracarboxylic Acid Dianhydride

Synthesis and Properties of Novel Reactive Dyes Comprising Acyl Fluoride Group on Cotton Fabrics

Enhancing polyamide 6: Acid hydrolysis for functionalization and amino group quantification

Bio Dyeing of Nylon 6 Fabrics Using Beetroot and Natural Mordants