Abstract:In this study, our primary aim was to increase the presence of amine groups in polyamide 6 fibers. To achieve this, we employed a functionalization process that mainly depended on increasing the number of reactive sites via acid-catalyzed hydrolysis. The effects of several acids were rigorously examined, including hydrochloric acid (HCl), sulfuric acid (H2SO4), and formic acid (HCOOH). Following this comprehensive acid-based treatment, the method that demonstrated the most significant increase in amine groups was selected for further evaluation in dyeing experiments and full characterization. The quantification of amino groups was performed using potentiometry, evaluating the equilibrium state of acid removal from the fibers. To corroborate these results, the acid dye Levaset Blue 2R was employed, which measured the amount of dye bound to the fibers during the dyeing process. Characterization of the polyamide 6 fiber structural changes was conducted using multiple techniques, including tensile tests, Fourier transform infrared (FTIR) spectroscopy, and differential scanning calorimetry (DSC). Among the acid treatments, the 11% HCl treatment exhibited the most significant increase in amine groups, amounting to an approximately 110% increase as measured by potentiometry and an approximately 150% increase using the dyeing method. During the dyeing process, the 11% HCl-treated fibers absorbed 91% of the dye from the dye bath, indicating enhanced color intensity and K/S value, thus affirming the efficacy of the amine group increasing. Tensile testing revealed a decrease in the strength of the functionalized fiber. In the FTIR spectra, there was a notable increase in the intensity of bands associated with the fiber's crystalline regions and hydrogen bonds. DSC tests validated the FTIR results, demonstrating a 9% increase in crystallinity. Furthermore, SEM micrographs depicted surface alterations induced by the hydrolysis process. These results collectively highlight the effectiveness of hydrolysis in introducing functional groups, enhancing color intensity during dyeing with acid dyes, and reducing dye content in the bath. Additionally, the potentiometric method for quantifying amine group demonstrated practicality and accuracy, serving as a valuable contribution to the field.

Study on the Acid Resistant Properties of Bio-Based Nylon 56 Fiber Compared with the Fiber of Nylon 6 and Nylon 66

Discussion on Factors Affecting Dyeing of Bio-based Polyamide 5,6 Fibers Compared with Polyamide 6,6 Fibers

Investigation of stain-resistant cationic dyeable nylon 6 modified with sodium salt of 5-sulfoisophthalic acid and polyethylene glycol

Long-Chain Bio-Based Nylon 514 Salt: Crystal Structure, Phase Transformation, and Polymerization

INFLUENCE OF THERMAL TREATMENT ON CRYSTAL MELTING BEHAVIOR AND CRYSTAL STRUCTURE OF NYLON 6 AND POLYAMIDE BLOCKCOPOLYMER/NYLON 6 BLENDS

Effect of Thermal Oxidative Aging on the Crystallization Behavior and Properties of Nylon-6

Comparative study on physical properties of bio-based PA56 fibers and wearability of their fabrics

Influence of Polyamide Acid Coating Reaction on the Properties of Aramid Fibre

Synthesis, characterization and crystallization kinetics of a bio-based, heat-resistance nylon 5T/10T

Enhancing polyamide 6: Acid hydrolysis for functionalization and amino group quantification

Blends of Zein and Nylon-6

The Relationships between the Structure and Properties of PA56 and PA66 and Their Fibers

Surface modification of nylon 66 fiber and its reinforcement of coordination crosslinked acrylic rubber

In situ reinforcing of monomer casting nylon-6 with nylon fiber and the interface failure mechanism

Mechanism study of the polymerization of polyamide 56: reaction kinetics and process parameters

The effect of polymorphism on polymer properties: crystal structure, stability and polymerization of the short-chain bio-based nylon 52 monomer 1,5-pentanediamine oxalate

A Novel Aging Evaluation Method of Nylon

Some Experiments on the Dyeing of Nylon Yarn

From zero to hero - production of bio-based nylon from renewable resources using engineered Corynebacterium glutamicum

The effect of electrophoretic deposition p‐aminobenzenesulfonamide grafted CNT on mechanical properties of carbon fiber filled polyamide 6 composite

Research on even-odd effects of bio-based Nylon nF salts