Abstract:Tonal noise radiated from an exhaust stack of a spray dryer system used to make powdered milk has been the source of unwanted community noise. The tone is characterised by a frequency above the first mode cut-on frequency of the exhaust duct and it is not steady in either amplitude or frequency. Passive silencing of the exhaust is a very expensive and inconvenient option and for this reason the feasibility of using active noise control was investigated. Zander and Hansen 1 developed a theoretical model for analysing the effect of active noise control on higher order rectangular duct modes, and used it to evaluate the effects of source size, location and strength. It was shown that the total acoustic power reduction was dependent on the relative locations of the control sources. More recently this work was applied to the practical example of a cylindrical spray dryer exhaust stack 1,2 to determine the most suitable location and number of control sources and error sensors. Prior to installation in the exhaust stack a half scale model was constructed to test the theory. Here, the effect of the error sensor locations on the active control on higher order acoustic modes propagating in the half scale circular duct is investigated experimentally using real time control with a multi-channel feedforward controller. A tacho meter signal at the fan blade pass frequency (BPF) was fed into the controller as the reference signal for the feedforward control. Two configurations of error sensors on the duct wall were tested to evaluate how the error sensor locations affect the control performance, which was evaluated in the far field of the duct outlet.

Experimental Research of Duct Active Noise Control for Motor Operating Noise

Experimental research of duct active noise control formotor operating noise

Dual-channel Space Active Noise Control System for Motor Operating Noise

Position Optimization for Secondary Speaker and Error Sensor of Duct Active Noise Control System

Improvement on Performance and Stability with Multiple Secondary Speakers in Duct ANC System

Design and Evaluation of Active Noise Control on Machinery Noise

Active Control of Noise in Vehicle Cabins

Development of active noise control simulation with virtual controller based on computational aeroacoustics

A survey on active noise control techniques -- Part I: Linear systems

Experimental Investigation on Motor Noise Reduction of Unmanned Aerial Vehicles

Narrowband active noise control system with online secondary-path modeling

Research on the Active Noise Control Technology for the Reduction of the Air Conditioner Noise in a Vehicle Cabin

Active Noise Control for Vehicle Exhaust Noise Reduction

Hardware-in-loop simulation of active noise control in car cabins

Performance Optimization of the Active Noise Control Algorithm Based on Logarithmic Function and Its Application in Secondary Channel Online Identification ANC System

A Survey on Active Noise Control in the Past Decade-Part I: Linear Systems

Development of an Active Muffler for Medium-Duty Diesel Vehicles Considering Thermal Influence and Control Trackability

Experimental Study of Active Control of High Order Acoustic Modes in Ducts

A Study of Hybrid Control Based on H-Infinity Synthesis Technique of Active Noise Control

Experimental study of the active noise control algorithms without secondary path modeling

DNoiseNet: Deep learning-based feedback active noise control in various noisy environments