Abstract:Tonal noise radiated from an exhaust stack of a spray dryer system used to make powdered milk has been the source of unwanted community noise. The tone is characterised by a frequency above the first mode cut-on frequency of the exhaust duct and it is not steady in either amplitude or frequency. Passive silencing of the exhaust is a very expensive and inconvenient option and for this reason the feasibility of using active noise control was investigated. Zander and Hansen 1 developed a theoretical model for analysing the effect of active noise control on higher order rectangular duct modes, and used it to evaluate the effects of source size, location and strength. It was shown that the total acoustic power reduction was dependent on the relative locations of the control sources. More recently this work was applied to the practical example of a cylindrical spray dryer exhaust stack 1,2 to determine the most suitable location and number of control sources and error sensors. Prior to installation in the exhaust stack a half scale model was constructed to test the theory. Here, the effect of the error sensor locations on the active control on higher order acoustic modes propagating in the half scale circular duct is investigated experimentally using real time control with a multi-channel feedforward controller. A tacho meter signal at the fan blade pass frequency (BPF) was fed into the controller as the reference signal for the feedforward control. Two configurations of error sensors on the duct wall were tested to evaluate how the error sensor locations affect the control performance, which was evaluated in the far field of the duct outlet.

Position Optimization for Secondary Speaker and Error Sensor of Duct Active Noise Control System

Improvement on Performance and Stability with Multiple Secondary Speakers in Duct ANC System

Experimental Research of Duct Active Noise Control for Motor Operating Noise

Experimental research of duct active noise control formotor operating noise

Dual-channel Space Active Noise Control System for Motor Operating Noise

Noise Pollution Reduction Through a Novel Optimization Procedure in Passive Control Methods

Optimization of number and location of error sensors in adaptive active sound control

Experimental study of the active noise control algorithms without secondary path modeling

Design and Evaluation of Active Noise Control on Machinery Noise

Layout Experiment of Secondary Sound Source for Adaptive Active Noise Control System in Vehicle Interior

An Improved Active Noise Control Algorithm Without Secondary Path Identification Based on the Frequency-Domain Subband Architecture

Error sensoring optimization in active noise barrier system

Optimization of error sensors used in adaptive active sound absorption

A Study on Multi-Channel Active Sound Profiling Algorithm for Hybrid Control of Broadband and Narrowband Noise Inside Vehicles

Experimental Study of Active Control of High Order Acoustic Modes in Ducts

Auxiliary Noise Power Scheduling in Active Noise Control Systems with Acoustic Feedback Path Modeling

Space Active Noise Control System Design with Multi-Objective Genetic Algorithms

Error microphone location study for an eight-channel anc system in free space

A Compact Active Sound Absorption System Compensating Near-Field Effect of the Secondary Source

Deep learning-assisted active noise control in a time-varying environment

Parameter optimization of secondary loudspeakers and compensators in active headrest