Abstract:Conventional active control of road noise inside a vehicle cabin generally uses a pure feedforward control system with the conventional filtered-x least mean square (FXLMS) algorithm. While it can yield satisfactory noise reduction when the reference signal is well correlated with the targeted noise, in practice, it is not always possible to obtain a reference signal that is highly coherent with a broadband response typically seen in road noise. To address this problem, an active noise control (ANC) system with a combined feedforward–feedback controller is proposed to improve the performance of attenuating road noise. To take full advantage of the feedforward control, a subband (SFXLMS) algorithm, which can achieve more noise attenuation over a broad frequency range, is used to replace the conventional FXLMS algorithm. Meanwhile, a feedback controller, based on internal model control (IMC) architecture, is introduced to reduce the road noise components that have strong response but are poorly correlated with the reference signals. The proposed combined feedforward–feedback ANC system has been demonstrated by a simulation model with six reference accelerometers, two control loudspeakers and one error microphone, using actual data measured from a test vehicle. Results show that the performance of the proposed combined controller is significantly better than using either a feedforward controller only or a feedback controller only, and is able to achieve about 4 dBA of overall sound pressure level reduction.

Auxiliary Noise Power Scheduling in Active Noise Control Systems with Acoustic Feedback Path Modeling

Research on Noise Cancelling Algorithm Based on Adaptive Auxiliary Noise Power Control

Simulation and Research on Adaptive Acoustic Feedback Reduction System

Improving Active Noise Control Without Secondary Path Modeling Using Subband Phase Estimation

An Improved Active Noise Control Algorithm Without Secondary Path Identification Based on the Frequency-Domain Subband Architecture

Modification of Frequency-Domain Active Noise Control Algorithm Without Secondary Path Modeling.

Active Feedforward Noise Control and Signal Tracking of Headsets: Electroacoustic Analysis and System Implementation

An active noise control method of non-stationary noise under time-variant secondary path

Configuring Fixed-Coefficient Active Control Systems for Traffic Noise Reduction

Development of active noise control simulation with virtual controller based on computational aeroacoustics

An improved stability compensation for feedforward active noise control systems with acoustic feedback

ACOUSTIC FEEDBACK CANCELLATION OF ACTIVE NOISE CONTROL SYSTEMS WITH OPTIMIZED SECONDARY PATH

A Simplified Adaptive Feedback Active Noise Control System

DNoiseNet: Deep learning-based feedback active noise control in various noisy environments

Experimental study of the active noise control algorithms without secondary path modeling

Feedforward Active Noise Global Control Using a Linearly Constrained Beamforming Approach

A Secondary Path-Decoupled Active Noise Control Algorithm Based on Deep Learning

Practical Active Noise Control: Restriction of Maximum Output Power

Combined Feedforward–Feedback Active Control of Road Noise Inside a Vehicle Cabin

A nonlinear active noise control algorithm using the FEWT and channel-reduced recursive Chebyshev filter

A survey on active noise control techniques -- Part I: Linear systems