Abstract:Excavator interior noise is composed of the engine order narrowband noise and the impulsive broadband noise caused by working device. In situations where only narrowband reference signal can be obtained, the feedforward active noise control (ANC) system can just eliminate the narrowband component, failing to control the broadband noise. Hybrid feedforward and feedback ANC (HANC) systems are useful for such applications where the reference signals can be partially obtained. However, existing HANC systems have the following drawbacks: coupling between subsystems; inaccurate error and reference signals; high computational complexity; performance degradation in response to the impulsive noise. To solve the above problems, this paper proposes a new feedforward and feedback HANC system consisting of 3 subsystems, namely, a delayed feedforward narrowband subsystem, a robust feedback broadband subsystem, and a supporting error calculating (SEC) subsystem. In the proposed HANC system, not only subsystems are decoupled, but also accurate error and reference signals are provided by SEC subsystem. In addition, calculating efficiency is improved by applying the delayed notch least mean square (DLMS) algorithm to the feedforward subsystem, and the system robustness is promoted by adopting the robust algorithm into the feedback subsystem. Numerous computer simulations are performed on the excavator interior noise measured under actual operating conditions. The corresponding results demonstrate the superior performance of the proposed HANC system in terms of the power spectral density of residual error, average noise reduction, robustness of the system, and calculation efficiency to the existing HANC systems. Real-time experiments on excavator interior noise showed that the proposed HANC system was efficient in eliminating broadband and narrowband mixture noise in practice.

Development of an Active Muffler for Medium-Duty Diesel Vehicles Considering Thermal Influence and Control Trackability

Active Noise Control for Vehicle Exhaust Noise Reduction

Numerical Analysis and Structure Improvement of Automotive Exhaust Muffler's Acoustic Characteristics

Numerical Simulation and Structure Optimization of Compressor Muffler

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

An Integrated Passive and Active Control System for Reducing Haul Truck Noise

Development of an Adaptive Control Simulation System for Vehicle Exhaust Noise Reduction

Numerical Analysis on Acoustic Characteristics of Automotive Exhaust Muffler by Transfer Matrix Method

Finite Element Method Simulation Analysis for Sound Field of Exhaust Muffler

Research on the Active Noise Control Technology for the Reduction of the Air Conditioner Noise in a Vehicle Cabin

Implementation of Active Noise Control in A Multi-Modal Spray Dryer Exhaust Stack

Multi-objective optimization of muffler for vehicle air-conditioning compressor pipeline

Active Control of Noise in Vehicle Cabins

Study On Adaptive Active Control Of Unstable Noise In Vehicle

Experimental Study on Noise Reduction Effect of a Muffler Inserted in Liquid Transporting Pipeline

Experimental Research of Duct Active Noise Control for Motor Operating Noise

A Research on the Noise Source Identification and Noise Control of Heavy-duty Truck

Development of active noise control simulation with virtual controller based on computational aeroacoustics

Experimental research of duct active noise control formotor operating noise

Theoretical Study on a Water Muffler

A new feedforward and feedback hybrid active noise control system for excavator interior noise