Abstract:Melt spinning machines must be set up according to the process parameters that result in the best end product quality. In this study, artificial intelligence algorithms were employed to create a system that detects abnormal processing parameters and suggests strategies to improve quality. Polypropylene (PP) was selected as the experimental material, and the quality achieved by adjusting the melt spinning machine's processing parameter settings was used as the basis for judgement. The processing parameters included screw temperature, gear pump temperature, die head temperature, screw speed, gear pump speed, and take-up speed as the six control factors. The four quality characteristics included fineness, breaking strength, elongation at break, and elastic energy modulus. In the first part of our study, we applied fast deep-learning characteristic grid calculations on a 440-item historical data set to train a deep learning neural network and determine methods for multi-quality optimization. In the second part, with the best processing parameters as a benchmark, and given abnormal quality data derived from processing parameter settings deviating from these optimal values, several machine learning and deep learning methods were compared in their ability to find the settings responsible for the abnormal data, which was randomly split into a 210-item training data set and a 210-item verification data set. The random forest method proved to be the best at identifying responsible parameter settings, with accuracy rates of single and double identification classifications together of 100%, for single factor classification of 98.3%, and for double factor classification of 96.0%, thereby confirming that the diagnostic method proposed in this study can effectively predict product abnormality and find the parameter settings responsible for product abnormality.

Some Suggestions on Setting Up National Quality Standards for Rotor-spun Yarn

New Bright Spot of Spinning Equipment Technology Development at Home and Abroad

State of Art in Quality Control Systems of Polymer Production Processes

Sensitivity analysis-based quality optimization strategy for multi-correlation parameters in spinning process

Test and Research on Reducing Yarn Forming Neps

Quality Prediction and Abnormal Processing Parameter Identification in Polypropylene Fiber Melt Spinning Using Artificial Intelligence Machine Learning and Deep Learning Algorithms

Research on wearing behavior of fibers in a rotor by numerical simulation and experimental verification

Centrifugal spinning：A high-efficient approach to fabricate micro-/nano-fibers(Part 1)

Test Analysis of Improving CV Value in Spinning Production

Simulation-based setting suggestions for yarn winding units to reduce color variation in knitted fabric

STUDY ON THE SPINNING FEASIBILITY OF BLENDED COMBED YARN WITH NEGATIVE ION VISCOSE FIBER/ZEIN FIBER/COTTON

DEVELOPMENT OF SHENG-BAST FIBER/FINE-DENIER POLYESTER/COTTON FIBER BLENDED YARN PRODUCTS

Development of knitting yarns with dyed-cotton fibers

Product Development and Process Study of Composite Yarn

Enhancing the Spun Yarn Properties by Controlling Fiber Stress Distribution in the Spinning Triangle with Rotary Heterogeneous Contact Surfaces

Structure and Tensile Characteristics of Rotor-Spun Composite Yarns

The quality comparison of open-end rotor-spun yarns produced from cotton waste in gray state and after dyeing

Tuning drafting zone parameters for polyester yarn within a ring spinning system: modeling and optimization

Review of Conventional Spinning Process and Its Roller Path Design Development

Research on rotary nozzle structure and flow field of the spinneret for centrifugal spinning

Recycled fibers from pre- and post-consumer textile waste as blend constituents in manufacturing 100% cotton yarns in ring spinning: A sustainable and eco-friendly approach