Abstract:Novel, porous, biodegradable biomaterials which support tissue integration and angiogenesis and which have elastomeric properties are needed to repair and replace soft tissues in dynamic environments. In this study poly(glycerol sebacate urethane) (PGSU) scaffolds with different porous structures were fabricated using freeze-drying by varying the polymer concentration of the freeze-drying solution, during which the polymer was further crosslinked. The effect of the porous structure on the physical properties, cell proliferation, tissue ingrowth and angiogenic properties was investigated. By increasing the polymer concentration in the freeze-drying solution from 5 w/v% to 10 w/v% and 15 w/v%, the porosity and pore size of the scaffold decreased, resulting in porosities ranging between 88 - 96% and pore sizes 6.4-28.2 μm. The mechanical properties increased with the polymer concentration, with ultimate tensile strength and Young's modulus between 0.05 - 0.86 MPa and 0.05-0.65 MPa respectively and negligible loss of tensile strength after 100 cycles of loading. Enzymatic degradation over 28 days demonstrated linear degradation kinetics with mass loss between 19.1 - 52.3%. All PGSU scaffolds provided a viable environment for cell attachment, in which cell metabolic activity increased over time indicating cell proliferation. The cells adhered to PGSU scaffolds produced and deposited high quantities of collagen, reaching 7.5% of the sample's dry mass after 14 days culture for the scaffold with the highest porosity. Additionally, the scaffolds with the polymer concentration of 5 w/v% implanted onto the chick chorioallantoic membrane supported rapid tissue ingrowth and new blood vessel formation within the porous scaffold. These results demonstrate that PGSU scaffolds have potential for use in many areas of soft tissue engineering.

Promoting the Cytocompatibility of Polyurethane Scaffolds Via Surface Photo-Grafting Polymerization of Acrylamide

Engineering Porous Polyurethane Scaffolds by Photografting Polymerization of Methacrylic Acid for Improved Endothelial Cell Compatibility

Photografting of Poly(Hydroxylethyl Acrylate) Onto Porous Polyurethane Scaffolds to Improve Their Endothelial Cell Compatibility

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Surface modification of polyurethane for promotion of cell adhesion and growth 1: Surface photo-grafting with N,N-dimethylaminoethyl methacrylate and cytocompatibility of the modified surface

Surface Immobilization of Bioactive Molecules on Polyurethane for Promotion of Cytocompatibility to Human Endothelial Cells

Functionalizing of Polyurethane Surfaces by Photografting with Hydrophilic Monomers

Grafting of Hydrophilic Monomers Onto Polyurethane Membranes by Solution or Pre-Absorbing Methods for Acceleration of Cell Compatibility

Surface Modification of Poly-L-Lactic Acid (plla) Membrane by Grafting Acrylamide: an Effective Way to Improve Cytocompatibility for Chondrocytes

Modification of 3-D Porous Hydroxyapatite/Thermoplastic Polyurethane Composite Scaffolds for Reinforcing Interfacial Adhesion by Polydopamine Surface Coating

Surface Modification of Poly‐l‐lactide by Photografting of Hydrophilic Polymers Towards Improving Its Hydrophilicity

Endothelium Regeneration on Luminal Surface of Polyurethane Vascular Scaffold Modified with Diamine and Covalently Grafted with Gelatin.

PHOTO-INDUCED GRAFTING OF POLY (METHACRYLIC ACID) ONTO POLYCAPROLACTONE TOWARDS PROMOTION OF CELL COMPATIBILITY

Photoinduced graft polymerization of acrylamide on polypropylene microporous membranes for the improvement of antifouling characteristics in a submerged membrane-bioreactor

Towards a methodology for the effective surface modification of porous polymer scaffolds

Surface properties and cell-surface interaction of polystyrene- graft -poly(2-hydroxyethyl methacrylate)

Polyurethane modification with acrylic acid by Ce(IV)-initiated graft polymerization

Effect of hydroxyapatite fillers on the mechanical properties and osteogenesis capacity of bio-based polyurethane composite scaffolds

Characterization and cytocompatibility of surface modified polyamide66.

The effect of porous structure on the cell proliferation, tissue ingrowth and angiogenic properties of poly(glycerol sebacate urethane) scaffolds

Photoreactive polymer and C,H-insertion reaction to tailor the properties of CHA/gelatin-based scaffold