Abstract:dA grafting technique was proposed for the preparation of polymer monolayer on polymeric substrate. On the basis of our recent work on polymer-supported inhibitor (PSI), hydroquinone (HQ) was first implanted onto polypropylene (PP) surface through UV-initiated grafting. The resulting immobilized HQ was used as PSI for the thermal-induced free radical polymerization (FRP) of acrylic acid (AA). The inhibition mechanism was similar to that of free HQ molecule, that is, polymer chain-carrying radical or peroxy radical could be deactivated by abstracting hydrogen atom from hydroxyl group of immobilized HQ, and the resulting oxyradical (semiquinone radical) combined with another active chain free radical. According to this mechanism, a devised redox initiator consisting of sodium hydrogen sulfite and ammonium persulfate was used to initiate FRP of AA in water at low temperature (50 degrees C). High crystalline biaxial oriented PP film with HQ immobilized was deliberately laid in this system as a radical trap to capture poly(acrylic acid) (PAA) short chain radical. Through X-ray photoelectron spectra (XPS) analysis it was found that the atom ratio of C-HQ (carbon in HQ) to C-COOH (carbon in COOH) decreased with prolonging polymerization time and became stable after about 30 min. The formed PAA short chain on the surface showed a distribution of monolayer, and the saturated thickness was calculated as 5-7 angstrom. The degree of polymerization of gaft chain in PAA monolayer was estimated as 15-20 through three different models. Relating to surface coverage being 100% in ideal densely packed PAA monolayer, real monolayer surface coverage in such reaction system was estimated as 12.3-18.5%. This method was expected to give us a general approach for constructing kinds of graft polymer monolayer on polymeric substrate, because the involved chemistry was only common inhibition reaction between immobilized inhibitor (HQ) and FRP system in solution (herein redox initiating system of AA). We named this grafting chemistry as confined surface inhibition reaction. (c) 2007 Wiley Periodicals, Inc.

Polyurethane modification with acrylic acid by Ce(IV)-initiated graft polymerization

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Functionalization of Hydrogen-Terminated Silicon Via Surface-Initiated Atom-Transfer Radical Polymerization and Derivatization of the Polymer Brushes

Surface grafting of carboxylic groups onto thermoplastic polyurethanes to reduce cell adhesion

Functionalizing of Polyurethane Surfaces by Photografting with Hydrophilic Monomers

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

Promoting the Cytocompatibility of Polyurethane Scaffolds Via Surface Photo-Grafting Polymerization of Acrylamide

Surface modification of polyurethane for promotion of cell adhesion and growth 1: Surface photo-grafting with N,N-dimethylaminoethyl methacrylate and cytocompatibility of the modified surface

Surface functionalization of degradable polymers by covalent grafting

Surface Functionalization of Polycaprolactone Films Via Surface-Initiated Atom Transfer Radical Polymerization for Covalently Coupling Cell-Adhesive Biomolecules.

Surface functionalization of polyurethanes: A critical review

Surface properties and cell-surface interaction of polystyrene- graft -poly(2-hydroxyethyl methacrylate)

Simple UV-Grafting of PolyAcrylic and PolyMethacrylic Acid on Silicone Breast Implant Surfaces: Chemical and Mechanical Characterizations

Surface functionalization of polypropylene film via UV-induced photografting of N-vinylpyrrolidone/maleic anhydride binary monomers

Surface functionalization of silicone rubber for permanent adhesion improvement

THE SYNTHESIS AND CHARACTERIZATION OF POLYURETHANE-ACRYLIC GRAFT EMULSION

Surface Immobilization of Bioactive Molecules on Polyurethane for Promotion of Cytocompatibility to Human Endothelial Cells

Photografting of Poly(Hydroxylethyl Acrylate) Onto Porous Polyurethane Scaffolds to Improve Their Endothelial Cell Compatibility

Study on control of the polymer substrate surface and its influence on surface grafting

Covalently Attached Graft Polymer Monolayer on Organic Polymeric Substrate Via Confined Surface Inhibition Reaction

Towards a methodology for the effective surface modification of porous polymer scaffolds