Abstract:<p>A specially designed diffusion triple and three diffusion couples were assembled to respectively determine isothermal sections of the Co–Fe–Ni alloy system at 1073 K and 1173 K. The binary thermodynamic parameters of the fcc and bcc phases in the Fe–Ni system were modified and further used to reassess the Co–Fe–Ni system above 873 K, neglecting the low-temperature ordered phases. Based on the present thermodynamic data, the atomic mobilities of Fe–Ni fcc phase were assessed to reproduce the literature data as well as the present extracted interdiffusion coefficients from two Fe–Ni diffusion couples. Furthermore, nine ternary Co–Fe–Ni diffusion couples annealed at 1173 K were scanned by using electron probe microanalysis and used to deduce the interdiffusion coefficients. Based on these coefficients and experimental data from 1373 K to 1588 K in the literature, the atomic mobilities of Co, Fe, and Ni coupled with the present thermodynamic description were assessed by means of DICTRA software, and verified by comparing with experimental composition profiles and diffusion paths. Although interdiffusion coefficients are treated as solvent-dependent so three sets of interdiffusion coefficients can be deduced from the same sets of ternary experimental data, the assessed atomic mobilities are unique and applicable in the whole composition range. This methodology is especially vital when studying diffusion behaviors for multi-principal element alloys (also known as complex concentrated alloys, or high entropy alloys).</p>

Determination of Phase Diagrams Using the Diffusion Couple Technique

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Application of the Thermodynamic Extremal Principle to Diffusion-Controlled Phase Transformations in Fe-C-X Alloys: Modeling and Applications

Experimental Investigations of the Ho-Fe-B phase diagram at 800 °C using diffusion couples

Phase-field Simulation of Solidification in Multicomponent Alloys Coupled with Thermodynamic and Diffusion Mobility Databases

A High-Throughput Search for Composition–Phase–Property Relations of Cu–Ni/Ti–Al Elastic Copper Alloys

Thermodynamic assessment of the Co–Fe–Ni system and diffusion study of its fcc phase

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Metastable Phase Diagrams of Cu-based Alloy Systems with a Miscibility Gap in Undercooled State

Experimental Investigation and Thermodynamic Verification for the Phase Relation around the ε-Mg23 (Al, Zn)30 Intermetallic Compound in the Mg-Zn-Al System

Phase-field Simulation of Phase Separation Coupled with Thermodynamic Databases in FeNiCrCoCu High-Entropy Alloys

Application Research on Thermo Calc Software in Two ele men t Phase Diagram

Effects of temperature gradient on the interface microstructure and diffusion of diffusion couples: phase-field simulation

The Cu–Te system: Phase relations determination and thermodynamic assessment

Thermodynamic Assessment of the Fe–Mn–Ni System and Diffusion Mobility of Its Face-Centered Cubic Phase

Experimental determination of the phase equilibria of aluminum-rich Al−Li−Cu alloys

Phase Equilibria of the Cu-Se-Te Ternary System

Study on the phase equilibria of the Ti-Ni-Nb ternary system at 900 degrees C

Calculation of Phase Diagrams and Solidification Paths of Al-rich Al−Li−Cu Alloys

Phase Equilibria of the Binary Ag-In System

On the Formation of Ternary Alloy Phases