Abstract:In this study, a new heat dissipation device with a composite heat sink of a loop heat pipe (LHP) system was evaluated for efficient cooling of electronic components. To improve the heat dissipation ability of the high heat flux chip and its local hot spot area, LHP, which had a gas-liquid phase change as the main mechanism of heat dissipation, was selected to remove heat. The experimental results showed that the average temperature performance was improved after the graphene copper foil heat sink was fitted, and the maximum temperature under the heat loads of 80 W, 90 W, 100 W, and 120 W was reduced by 3.8 degrees C, 5.7 degrees C, 6.5 degrees C, and 7.7 degrees C, respectively, compared with without a heat sink. The hot spot temperature increased linearly with an increase in the inlet water temperature. Increasing the ambient temperature within a certain range had little effect on the heat-dissipation effect of the hot spots. To interpret the experimental results, the hot spot heat transfer performance of the evaporation section of the LHP with a composite heat sink was set up by the equivalent thermal resistance model. The CFD simulated results were in good agreement with the experimental values. This indicated that the heat sink significantly reduced the hot spot temperature and improved the cooling uniformity largely. When the transverse thermal conductivity of the heat sink is sufficiently high, the increase in longitudinal thermal conductivity is more effective in reducing the hot spot temperature than the transverse thermal conductivity. Moreover, it has been suggested that the hot spots and heating power play a major role in the actual electronic structure and heat dissipation design. In summary, the study proposes a valuable method for improving the uniform cooling of chips, which was conducive to the heat management of the system.

Experimental Investigation of the Thermal Performance of Flat Heat Pipe Heat Sink for Multi-chip Cooling

Investigation of the Thermal Performance of a Novel Flat Heat Pipe Sink with Multiple Heat Sources

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

An experimental study of a novel integrated heat pipe-heat sink for chip cooling

Experimental Investigation on the Heat Transfer Performance and Evaporation Temperature Fluctuation of a New-Type Metal Foam Multichannel Heat Pipe

Experimental research on the thermal performance of the dry conduction plate for multi-point electronic chips

An experimental investigation on a novel high-performance integrated heat pipe–heat sink for high-flux chip cooling

Experimental Investigation of the Thermal Performance of a Heat Sink with U-shaped Heat Pipes

Investigation of Heat Transfer Enhancement for a Heat-pipe Heat Exchanger Used for Chips

An experimental study of a novel high-performance heat pipe for chip cooling of desktop computer

Experimental Investigation on an Integrated Multiple-Contact FHP Heat Sink

Experimental and Numerical Investigation on Thermal Characteristics of the Heat Sink Integrating 3D Vapor Chamber Heat Spreader and Liquid Cooling Fins

Design of CPU Integrated Heat Sink Using Heat Pipes Assisted with CFD and Experimental Research

An experimental investigation on the thermal performance of a flat plate heat pipe spreader

Heat Transfer Characteristics of Chip Heat Sink Based on Composite Wick Micro Heat Pipe Array

Study of Heat Dissipation Characteristics of Loop Heat Pipe with Heat Sink of Composite Material

Experimental investigation on thermal performance of a flat heat pipe

Experimental Investigation of Thermal Performance of a Unique Heat Pipe Array

Numerical and Experimental Investigation on Flat Heat Pipes With Integral Micro-grooved Wicks

Experimental investigation on thermal characteristics of a novel loop heat pipe for cooling high heat flux electronic chips

Heat Transfer Characteristics of Flat Micro-Heat Pipe Array