Abstract:Due to the advantages of high power density, high efficiency, and great potential in extreme temperature environments, the GaN high electron mobility transistor (HEMT) device is widely used in circuit systems at high or low temperatures. However, its electrical performance is sensitive to the ambient temperature. Therefore, it is essential to build a model that can accurately characterize the electrical performance of GaN HEMTs at different ambient temperatures, which is also essential for precise circuit design. With the analysis of experiment and theory on the GaN HEMT at different ambient temperatures, an improved model for temperature effect on the DC characteristics of the GaN HEMT is proposed based on EEHEMT model. Considering the influence of the ambient temperature on electrical properties of the GaN HEMT, such as the threshold voltage, the knee voltage, and the saturated current, the model establishes a temperature-dependent function for key parameters in the formula of the drain-source current. Through Verilog-A implementation and simulation on the ICCAP software, the improved model accurately reflects the trend of the electrical performance changes of the GaN HEMT at different ambient temperatures. To further verify the model in this work, the on-wafer measurements at different temperatures including -55, -25, 25 and 75 degrees C are carried out for GaN HEMTs with different sizes, which are developed by Nanjing Electronic Devices Institute. Compared with the measured data, the output characteristics and the transfer characteristics simulated by the proposed model are accurate in an ambient temperature range of -55-75 degrees C, with a relative fitting error less than 5%. The result shows that the improved model is of guiding significance in analyzing the direct current performance and high reliability design of circuits at different temperatures.

Model device parameters for a 10-Gb/s HEMT modulator driver IC

Device Model Parameters for 2.5—10gb/s HEMT Modulator Driver IC

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

A GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping for High-Frequency DC-DC Converter.

10gb/S External Modulator Module Using Capacitive And Inductive Peaking Technology

A Compact Gate-Width Scalable Model for Dual-Gate GaAs Phemt

An Improved Analytical Model of GaN HEMT in Cascode Configuration During Turn-on Transition

Dynamic Gate Capacitance Model for Switching Transient Analysis in P-GaN Gate HEMTs

High Speed Silicon Mach-Zehnder Modulator with Circuit Model Analysis

Modeling of Temperature Effect on DC Characteristics of Micro Wave GaN Devices

A GaN HEMT Integrated Power Module with Silver Sintering Processes

Analysis of Passivation Techniques in InP HEMTs and Implementation of an Analytical Model of F(t) Based on the Small Signal Equivalent Circuit

Effect of Device Geometry on Static and Dynamic Performance of AlGaN/GaN-on-Si High Electron Mobility Transistor

A Normalized Quantitative Method for GaN HEMT Turn-ON Overvoltage Modeling and Suppressing

Modeling the Gate Driver IC for GaN Transistor: A Black-Box Approach

Third generation semiconductor device research: Optimizing CMOS and HEMT designs

Compact Modeling of Capacitance Components for GaN HEMTs

A Unified Electrothermal Behavior Modeling Method for Both SiC MOSFET and GaN HEMT

An Improved DC Model for AlGaN/GaN HEMTs

Small signal modeling of AlGaN/GaN HEMTs with consideration of CPW capacitances

Circuit Models of Power MOSFETs Leading the Way of GaN HEMT Modelling—A Review