Abstract:A novel mechanical test for characterizing the transient, on-heating mechanical behavior of metallic structural materials was developed. It comprises the continuous heating of a specimen at a constant rate while loaded under a constant true stress. Key features of the approach consist of quantifying the thermal expansion (“thermal compliance”) and mechanical compliance of the load train, modeling the plastic flow and onset of localized necking of the test specimen, and the simulation of concurrent phase changes for multi-phase alloys. From such experiments and analyses, the instantaneous, true plastic strain and strain rate as a function of temperature can readily be determined and used to establish constitutive parameters (such as the apparent activation energy, Qapp, for plastic flow) and temperatures at which rapid deformation may occur. The test technique was validated for three alloys, Ti–7Al, Ti–6Al–2Sn–4Zr–2Mo–0.1Si (Ti6242S), and superalloy 718. For the single-phase-α titanium alloy, Ti–7Al, semi-log plots of strain rate vs inverse temperature (ln ε˙documentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$$dot{varepsilon }$$end{document}vs 1/T) were linear, and yielded a value of Qapp comparable to that for self diffusion of hcp titanium. The corresponding plots for Ti6242S with either a fully equiaxed or duplex (equiaxed/colony α) microstructure were also linear, but exhibited higher values of Qapp, a finding rationalized using simulations of the kinetics of dissolution of equiaxed α as a function of temperature and the so-called “mechanical contribution” to the activation energy of two-phase alloy systems. Last, ln ε˙documentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$$dot{varepsilon }$$end{document}-vs-1/T plots of 718 were either linear (in the solution-treated condition) or approximately bilinear (in the solution-treated-and-aged condition). These observations were interpreted with the aid of simulations of precipitation and dissolution of γ′′ and γ′ during continuous heating and the retarding effect on straining of a threshold (back) stress associated with the precipitates.

A critical assessment of high-temperature dynamic mechanical testing of metals

Validity analysis of materials' dynamic tensile SHTB experimental technique at ultrahigh temperature

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

A New Technique for Conducting Split Hopkinson Tensile Bar Test at Elevated Temperatures

Experimental study on dynamic behavior of concrete at elevated temperatures

Dynamic tensile properties of a single crystal Nickel-base superalloy at high temperatures measured with an improved SHTB technique

An Experimental Method for Determination of Dynamic Mechanical Behavior of Materials at High Temperatures

Dynamic Compressive Behavior of a Single Crystal Nickel-Base Superalloy at Ultra-High Temperature: Mechanism Investigation with a Modified Electric Synchronous SHPB Technique

A New Method of Tensile Performance Testing for Materials at High Temperature and High Strain Rate

A New Technique for Performing Tortional Split Hopkinson Bar Experiments at High Temperatures

Experimental Study on the Dynamic Tensile Behavior of A Poly-Crystal Pure Titanium at Elevated Temperatures

The Split Hopkinson Pressure Bar Technique of High Temperatures and Its Application

Mechanical Behavior of a Stainless Steel Material at Elevated Temperatures and High Strain Rates

Determination of Dynamic Behavior of Materials at Elevated Temperatures and High Strain Rates Using Hopkinson Bar

Experimental Research on Dynamic Mechanical Behavior of TC18 Titanium Alloy under Medium and High Strain Rates

Dynamic tensile behavior of 5CrMnMo at elevated temperatures

Study on Dynamic Compressive Mechanics Behavior of TC17 Titanium Alloy at High Temperature and High Strain Rates

Experimental investigation on mechanical behaviours of TMCP high strength steel

Dynamic Mechanical Behavior at Elevated Temperatures and High Strain Rates of Low Yield Point Steels

The Constant-Stress, Constant-Heating-Rate Test: A Novel Method for Characterizing Transient Mechanical Behavior of Metallic Materials

A Method for Dynamic Kolsky Bar Compression at High Temperatures: Application to Ti-6Al-4V