Abstract:A facile way to fabricate highly efficient organic light emitting devices (OLEDs) with insulator MnO as an electron injecting and transporting material was devised, which eliminates the problem of the oxidation of reactive dopants. The power efficiency of 1.1 lm/W by inserting 3-nm-thick MnO as the electron injecting layer was obtained, higher than the 0.8 lm/W efficiency for the reference device with 0.5-nm-thick LiF. A thermal co-evaporation layer containing 10% weight of MnO and tris(8-hydroxyquinolato) aluminum (Alq(3)) as the electron transporting layer showed more efficient electron transport ability, with turn-on voltage of 3.8 V, lower than 7.4 V for the intrinsic Alq3. Meanwhile, the insertion of thin MnO layer between organic photoactive layer and inorganic metal electrode significantly improved performance and stability of organic solar cell compared to device without it. The power conversion efficiency (PCE) of 2.91% by inserting 3-nm-thick MnO was obtained, higher than the 0.91% efficiency for the device without it, and 2.59% for the device with 0.5-nm-thick LiF. Charge transport of rhenium trioxide (ReO3) in organic electronic devices was investigated. The hole injection/transport was blocked and the electron injection/transport was enhanced with doping of ReO3 in organic electronic devices. Thus the charge balance and efficiency of the OLED were improved, 2.7 cd/A of current efficiency (CE) at 20 mA/cm(2) for the device with ReO3 was higher than 1.5 cd/A for the device without it. In the case of organic photovoltaic cells (OPV), the open-circuit voltage (V-oc), 0.58 V, was higher compared to the device without ReO3 (0.44 V) due to the improvement of interface properties. The PCE was increased to 2.27% by the combination of ReO3 (increasing V-oc) with poly(3,4-ethylene dioxythiophene): poly(styrene-sulfonate) (PEDOT:PSS) (improve hole transport to increase J(sc)) on the modification of the anode, higher than 1.85% for the device without ReO3.

Highly Efficient Organic Light-emitting Devices Achieved by p-type Doped Hole Injection Layer

Highly Power Efficient Organic Light-Emitting Diodes Based on P-Doped and Novel N-Doped Carrier Transport Layers

Improved Hole Injection And Transport Of Organic Light-Emitting Devices With An Efficient P-Doped Hole-Injection Layer

Highly Doped Conjugated Polyelectrolytes with Large Work Function for Efficient Hole Injection/Collection in Organic Photoelectric Devices

Highly Efficient Nondoped Green Organic Light-Emitting Diodes with Combination of High Photoluminescence and High Exciton Utilization

Novel phosphine oxide-based electron-transporting materials for efficient phosphorescent organic light-emitting diodes

Improved Efficiency in Blue Phosphorescent Organic Light‐Emitting Devices Using Host Materials of Lower Triplet Energy Than the Phosphorescent Blue Emitter

Enhanced hole injection and transport in molybdenum-dioxide-doped organic hole-transporting layers

Improving working lifetime and efficiency of phosphor doped organic light-emitting diodes

Highly efficient and bright doped organic electroluminescent diodes using an aluminum electrode

Producing p‐Doped Surface for Hole Transporting Layer‐Free Nonfullerene Organic Solar Cells

Highly Efficient Red Phosphorescent Organic Light-Emitting Devices Based on Solution-Processed Small Molecular Mixed-Host

Solution Process Feasible Highly Efficient Organic Light Emitting Diode with Hybrid Metal Oxide Based Hole Injection/Transport Layer

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Highly Efficient Organic Light Emitting Devices with Insulator MnO As an Electron Injecting and Transporting Material

P-141: High-Efficiency and Long Lifetime Electrophosphorescent Organic Light-Emitting Diodes with Improved Hole-Electron Balance by Using Alternate Multilayer Structures

N-Type Doping in Organic Electronic Devices

An Efficient Blue Organic Light Emitting Structure

Highly Efficient Green Organic Light-Emitting Devices Based on Terbium Complex by Employing Hole Block Material As Host

Controllable and efficient hole-injection layers with molybdenum oxide units by solution-processed procedure for OLEDs

P‐168: Investigation of High‐Efficiency Electrophosphorescent Organic Light‐emitting Diodes with Double‐Emission Layers