Abstract:High temperature air combustion (HTAC) is a promising technology for energy saving, flame stability enhancement and NOx emission reduction. In a conventional HTAC system, the combustion air is highly preheated by using the recuperative or regenerative heat exchangers. However, such a preheating process is difficult to implement for pulverized fossil fuel fired boilers. In this paper, an alternative approach is proposed. In the proposed HTAC system, a special burner, named PRP burner is introduced to fulfill the preheating process. The PRP burner has a preheating chamber with one end connected with the primary air and the other end opened to the furnace. Inside the chamber, gas recirculation is effectively established such that hot flue gases in the furnace can be introduced. Combustible mixture instead of combustion air is highly preheated by the PRP burner. A series of experiments have been conducted in an industrial scale test facility, burning low volatile petroleum coke and an anthracite coal. Stable combustion was established for burning pure petroleum coke and anthracite coal, respectively. Inside the preheating chamber, the combustible mixture was rapidly heated up to a high temperature level close to that of the hot secondary air used in the conventional HTAC system. The rapid heating of the combustible mixture in the chamber facilitates pyrolysis, volatile matter release processes for the fuel particles, suppressing ignition delay and enhancing combustion stability. Moreover, compared with the results measured in the same facility but with a conventional low NOx burner, NOx concentration at the furnace exit was at the same level when petroleum coke was burnt and 50% less when anthracite was burnt. Practicability of the HTAC technology using the proposed approach was confirmed for efficiently and cleanly burning fossil fuels.

The Development of Regenerative Mill Furnace and It's Merits and Demerits

The Merits and Demerits and Combustion Thermo-Atmosphere of Regenerative Mill Furnace

Application and development of regenerator material of HTAC

A new type of heating furnace adopting controllable hybrid technique

Advances in Research on Combustion Characteristics Involved in High Temperature Air Combustion Technique

INVESTIGATION OF HIGH TEMPERATURE AIR COMBUSTION OF SELF-REGENERATOR

Development of Self-Regenerative High Temperature Air Combustion Technology

Recent Development of High Temperature Air Combustion Technology in the World

Development of High Temperature Air Combustion Technology in Pulverized Fossil Fuel Fired Boilers

Study of Performance of Honeycomb Ceramic Regenerator in High Temperature Air Generator

Feasibility Analysis of the HTAC Technology Used in Shuttle Kiln

Numeric Calculation and Experiment of High Temperature Low Oxygen Fuel Furnace

Experiments on Self-Regenerative High Temperature Air Combustion

Comparative Analysis And Application On Mobile-Heating Echnology Of Regenerative Energy

Recent advances on research and application on supercritical hydrothermal combustion technology

A New Normal Temperature Air Implementation Technology Flameless Combustion and Analyses of Its Specific Features

DEVELOPMENT OF HIGH TEMPERATURE AIR GENERATOR TEST RIG

Development and Prospect of Vacuum High-Pressure Gas Quenching Technology

Design of Exhaust Heat Utilization System for Shuttle Kiln

Development of long life technology of European blast furnaces

Experimental Study on the Off-Design Performances of a Micro Humid Air Turbine Cycle: Thermodynamics, Emissions and Heat Exchange