Abstract:In construction and architectural industries, multi-material additive manufacturing is gaining more interest because of obtaining the combined material properties in a single additive process by multiple materials. The present work concentrates on developing functionally gradient multi-material composite using Poly Lactic Acid (PLA), and novel extruded walnut shell particle reinforced Poly Lactic Acid (WPLA) by Fused Filament Fabrication technology. This work followed single and multi-gradient material deposition approaches, and their mechanical, thermal, and tribological properties were compared with standard 3D printed PLA and walnut shell-reinforced PLA composite. Among the 3D printed functional graded multi-materials, the composites with single-gradient PW configuration exhibits better compressive and D shore hardness value of 63.68 MPa and 76.2 compared with the neat PLA composite. The results show that considering the tensile and flexural samples the single gradient PLA samples shows better values when compared with all other multi gradient prepared composites. The highest heat deflection temperature of 56 °C was observed on the WPLA composite and for gradient materials PW composite which is PLA (50%) and walnut shell reinforced PLA (50%) sample exhibits the maximum heat deflection temperature of 54.4 °C. Furthermore, considering the tribological and thermal properties, the multi-gradient composite of WPW configured with PLA of 40% as inner core exhibits the lowest thermal conductivity of 0.087 W/mK and a specific wear rate of 1.631 × 10 −6 mm 3 /Nm when compared with neat PLA composite. Therefore, among the novel functional graded multi-material, the sample PW with PLA (50%) and walnut shell reinforced PLA (50%) composite will be more suitable for semi-structural applications, and the composite with WPW designation (PLA of 40% as inner core) will suit the high wear-resistant and constructional building panel material for thermal proofing applications.

A Flat Polymeric Gradient Material: Preparation, Structure and Property

Gelatin/Poly(ethylene oxide) Blend Films with Compositional Gradient: Fabrication and Characterization

THE STUDY ON PP/Talc FLAT POLYMEIC GRADIENT MATERIALS--(Ⅱ) PERFORMANCE

A New Technique for Fabrication of Flat Pp/Talc Graded Material

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Poly(glycolic Acid) Materials with Melt Reaction/processing Temperature Window and Superior Performance Synthesized Via Melt Polycondensation

Preparation of Gradient Polymer Surfaces

Preparation of PA6/PP Gradient Materials and Their Properties

Model-based design and synthesis of gradient MMA/tBMA copolymers by computer-programmed semibatch atom transfer radical copolymerization

Mechanical Properties of Gradient Copolymers of Styrene and N -Butyl Acrylate

Study on pp/talc flat polymeic gradient materials-(II) Performance

Tailor-made compositional gradient copolymer by a many-shot RAFT emulsion polymerization method

Gradient-modulus materials: Preparation, physical properties and application

Three-Dimensionally Printed Ternary Composites of Polyamide: Effect of Gradient Structure on Dimensional Stability and Mechanical Properties

Surface modification through gradient morphology control of polymer blends

Controls of Gradient Morphology and Surface Properties of Polymer Blends

Tailoring the Morphology of Polypropylene/Polyamide 66 Blend at an Asymmetric Composition by Using Organoclay and Maleic Anhydride Grafted Polypropylene

Development of functional gradient multi-material composites using Poly Lactic Acid and walnut shell reinforced Poly Lactic Acid filaments by fused filament fabrication technology

Functionally Gradient Macroporous Polymers: Emulsion Templating Offers Control over Density, Pore Morphology, and Composition

Fabrication of Poly(pegma) Surface with Controllable Thickness Gradient and Its Mediation on the Gradient Adhesion of Cells

3D printing of polycaprolactone-based composites with diversely tunable mechanical gradients via multi-material fused deposition modeling