Abstract:The gas–solid flow characteristics greatly influence the heat transfer, combustion and pollutant formation processes in a circulating fluidized bed (CFB) boiler. The effects of particle size on the gas–solid flow characteristics, including flow structure, axial pressure and bed density profiles were studied in a two-dimensional CFB cold apparatus under low solid circulation rates ( G s 's). At the same time, an optical fiber probe was used to assess the particle size effect on the formation of particle clusters and their properties under different operating conditions. Results revealed that when the averaged size of bed materials decreased from ∼200 μm to ∼100 μm, at the same operating condition, the bottom dense bed became remarkably higher, and the upper dilute zone had stronger pressure fluctuation, more even axial and horizontal particle distributions, and higher solid density. G s was more sensitive to the variation of the superficial gas velocity than the bed inventory. In addition, the standard deviation and power spectrum density of instantaneous pressure decreased in the dense bed and increased in the dilute zone. The particle velocity was slightly lower in the lower section of the riser but noticeably greater in the upper riser section. In addition, the clusters formed more frequently and lasted significantly longer. The study showed that flow characteristics in the bed qualitatively changed from that of Type B particles to that Type A particles in the Geldart's classification, even at a small G s , and previous studies with Type B particles could very likely not apply in the CFB boilers operating with fine bed materials.

Effect of bed material on particle mixing in solid waste fluidized bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Study on Mixing Performance of Municipal Solid Waste (MSW) in Differential Density Fluidized Beds (Fbs)

Investigation on Particle Mixing Characteristics of Municipal Solid Wastes Fluidized Bed Incinerator

Experimental Study and Simulation of Low-Temperature Gasification of Municipal Solid Waste in Circulated Fluidized Bed

EXPERIMENTAL STUDY ON PARTICLE MOTION CHARACTERISTIC IN THE INTERNAL CIRCULATING FLUIDIZED BED

Fluidization Characteristics of Municipal Solid Wastes in Fluidized Bed

Distribution of Lumped Matter in Internally Circulating Fluidized Bed Boilers

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Visual Research on Big Particle Behavior in Dense-Phase Zone of Circulating Fluidized Bed

Influence of Simulated MSW Sizes on the Combustion Process in a Fixed Bed: CFD and Experimental Approaches.

Stability of Fluidization in Fluidized Bed with Tube-Type Distributing Wind Used for MSW Incineration

Research on Mixing Character of Fluidized Bed Particles with Image Processing Technique

Research on particle mixing in a fluidized bed

Mixing/segregation characteristics and bubble behaviors of density-segregated binary particles in a pressurized fluidized bed

Effect of bed material size on gas-solid flow characteristics in a CFB at low solid recirculation rates

Numerical Study of Mixing Pebble Flow with Different Density in Circulating Packed Bed

Particle-Scale Simulation of Solid Mixing Characteristics of Binary Particles in a Bubbling Fluidized Bed

Experimental Research on Fluidized Bed Combustion of Typical Municipal Solid Waste Components

Experimental Study of the Effect of Fluidization Velocity on the Segregation of Two Size Particles System

Effect of bed density on the segregation behavior of fine coal particles (<6 mm) in a gas–solid separation fluidized bed