Abstract:Gaining an understanding of how chemical treatment affects the mechanical properties of natural fiber reinforced polymer composites is essential to enhance their performance and broaden their applicability across various engineering domains. The objective of this study was to develop bio-composites by combining polylactic acid with sisal fibers that have undergone chemical treatments and evaluating the mechanical properties at different temperatures to determine their suitability for high-temperature applications. For this purpose, sisal fibers were chemically treated using alkali, acetylation, and alkali/acetylation solution before composite processing. The results revealed that tensile strength slightly improved by alkali treatment, while both alkali/acetylation and acetylation treatments decreased the tensile strength and tensile modulus. Alkali treatment significantly enhanced flexural strength, while the effect of acetylation and alkali/acetylation treatments on flexural strength was less pronounced. All chemical treatments led to a slight increase in flexural strain at failure, but resulted in a decrease in tensile strain at failure and tensile modulus. Alkali treatment slightly increased flexural modulus, while acetylation and alkali/acetylation treatments significantly reduced it. The impact strength of the bio-composites was increased by alkali and acetylation treatments, but significantly reduced by alkali/acetylation treatment. Furthermore, the flexural strength of all bio-composites decreased as temperature increased, especially in plasticized bio-composites using tributyl 2-acetylcitrate plasticizer. The flexural strain at failure decreased with the addition of tributyl 2-acetylcitrate at room temperature. In plasticized bio-composites, the flexural strain at failure increased at 35°C, but decreased at 45°C. On the other hand, the flexural strain at failure of non-plasticized bio-composites remained constant up to 35°C, slightly increased up to 45°C, and then significantly increased at temperatures above 45°C. These bio-composites could be suitable for packaging industry as biodegradability is the criteria for such applications.

Research on Mechanical Properties of Heat-treated Sisal Fiber/PLA Composites and Its Preparation

Influence of Hot Press Molding Parameters on the Tensile Strength of Bamboo Fiber/PLA Composites

Effect of Hydrothermal Pretreatment on the Properties of Moso Bamboo Particles Reinforced Polyvinyl Chloride Composites

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Effect of Fiber Modified by Alkali/polyvinyl Alcohol Coating Treatment on Properties of Sisal Fiber Plastic Composites

An investigation of sound absorption coefficient on sisal fiber poly lactic acid bio-composites

Preparation and characterization of composites based on poly(lactic acid)/poly(methyl methacrylate) matrix and sisal fiber bundles: The effect of annealing process

Effect of Chemical Treatment of Cotton Stalk Fibers on the Mechanical and Thermal Properties of PLA/PP Blended Composites

Effect of steam explosion and silanization of hemp fibers on polylactic acid biocomposites; analysis of mechanical-thermal properties and fungal biodegradation

Preparation and properties of heat-treated esterified wood flour/polylactic acid composites for FDM 3D printing

Preparation of Long Sisal Fiber-Reinforced Polylactic Acid Biocomposites with Highly Improved Mechanical Performance

Influence of fiber surface treatment on the mechanical properties of sisal fiber reinforced polylactic acid bio-composites

Effect of Low‐concentration Alkali Solution Pretreatment on the Properties of Bamboo Particles Reinforced Poly(lactic Acid) Composites

Natural jute fiber treated with silane coupling agent KH570 reinforced polylactic acid composites: mechanical and thermal properties

Influence of fiber volume fraction and curing temperature on mechanical properties of jute/PLA green composites

Preparation and Properties of Straw Fiber/Polylactic Acid Composites

A Review on the Effect of Heat Treatment for Thermoplastic Composites

Mechanical Performances Analysis and Prediction of Short Plant Fiber-Reinforced PLA Composites

Effects of High-Intensity Ultraviolet Irradiation on the Structure and Mechanical Properties of Sisal Fibers

Fracture toughness and overall characterization of PLA based biocomposites with natural fibers: a comparative study.

Preparation and characterization of PLA/rice straw fiber composite