Abstract:Inevitably increase in plastic demand has resulted in an overgrowing production on a global scale. The utilization of plastics has been applied to a number of industries as it is a durable, moldable, and inexpensive material. High exploitation of plastic had resulted in a hefty amount of waste production, which is not easy to recycle due to its non-degradable nature and results in landfills. Nowadays, waste to energy processes such as pyrolysis has emerged as a superlative process for the management of plastic waste by converting it into useful products. On the other hand, the employment of carbon nanotubes (CNT’s) has shown high growth in their production. CNT’s were generally synthesized from conventional gases like methane, ethane, and ethylene. Plastic waste can be utilized to substitute the feed material for the CNT synthesis via pyrolysis method. In this study, a two-step pyrolysis process was investigated for product recovery and CNT’s production. The first steps consisted of catalytic and non-catalytic degradation of mixed plastic waste in a vertical fixed bed reactor at 500 °C with a heating rate of 20 °C/min for the production of pyrolytic oil and gases and were analyzed. The second step consists of the employment of catalytic pyrolysis gases in a horizontal tube reactor maintained at a temperature of 800 °C over a bed of catalyst for the synthesis of CNT’s via catalytic vapor deposition (CVD) technique. It was established that the use of catalyst decreases the oil phase production from 80.5 to 64%, char from 9 to 6.5% while an increase in gas phase production from 10.5 to 29.5% was reported. The alteration of hydrocarbons to CNT’s was investigated via pre- and post-GC analysis of the gas samples. Post gas investigation indicates an increased concentration of hydrogen in the sample. Also, the decline of hydrocarbon gases concentration was observed in post sample analysis. Also, transmission electron microscopy (TEM) analysis confirms the synthesis of CNT’s.

Coupled process of plastics pyrolysis and chemical vapor deposition for controllable synthesis of vertically aligned carbon nanotube arrays

Chemical vapor deposition growth of single-walled carbon nanotubes from plastic polymers

Coupling dechlorination and catalytic pyrolysis to produce carbon nanotubes from mixed polyvinyl chloride and polyethylene

Converting polyolefin plastics into few-walled carbon nanotubes via a tandem catalytic process: Importance of gas composition and system configuration

Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst

Feasibilities of producing high-value carbon nanotubes from waste plastics by spray pyrolysis

Preparation of carbon nanotubes by catalytic pyrolysis of dechlorinated PVC

Production of carbon nanotubes via catalytic pyrolysis of waste plastics over Ni/Al 2 O 3 catalyst: The influence of plastic types

Production of Carbon Nanotubes Via Catalytic Pyrolysis of Waste Plastics over Ni/Al2O3 Catalyst: the Influence of Plastic Types

Ultralow Feeding Gas Flow Guiding Growth of Large-Scale Horizontally Aligned Single-Walled Carbon Nanotube Arrays

Carbon nanotubes production from real-world waste plastics and the pyrolysis behaviour

Simultaneous production of aromatics-rich bio-oil and carbon nanomaterials from catalytic co-pyrolysis of biomass/plastic wastes and in-line catalytic upgrading of pyrolysis gas

Large Area Growth of Aligned CNT Arrays on Spheres: Cost Performance and Product Control

Structure-oriented conversions of plastics to carbon nanomaterials

Alcohol-Assisted Rapid Growth of Vertically Aligned Carbon Nanotube Arrays

Conventional pyrolysis of Plastic waste for Product recovery and utilization of pyrolytic gases for carbon nanotubes production

Investigation of spherical alumina supported catalyst for carbon nanotubes production from waste polyethylene

Synthesis of Vertically Aligned Carbon Nanotube Arrays on Silicon Substrates

Simultaneous production of high-valued carbon nanotubes and hydrogen from catalytic pyrolysis of waste plastics: The role of cellulose impurity

Growth of High-Density Parallel Arrays of Ultralong Carbon Nanotubes with Catalysts Pinned by Silica Nanospheres

Recent advancements in the use of plastics as a carbon source for carbon nanotubes synthesis - A review