Abstract:PURPOSE:Using sandblast, double acid-etching and H(2)O(2)/HCl solution treatment to establish a new implant surface, and to analyze the surface's morphology.METHODS:After being polished, sandblasted, cleaned, the titanium specimens were divided into six groups, i.e.A to F group. The specimens of group A were treated with low concentration of HF/HNO(3) solution, Group B was treated with low concentration of HF/HNO(3) solution and then H(2)SO(4)/HCl solution, Group C was treated after Group B and further with H(2)O(2)/HCl solution at 80degrees centigrade for 30 minutes, and subsequently heated at 400degrees centigrade for 1 hour. Group D was treated with high concentration of HF/HNO(3) solution, Group E was treated after Group D and then H(2)SO(4)/HCl solution, Group F was treated after E group and further with H(2)O(2)/HCl solution at 80degrees centigrade for 30 minutes, and subsequenty heated at 400degrees centigrade for 1 hour.RESULTS:The titanium surface sandblasted and ultrasonically cleaned exhibited a great deal of particles. The titanium plates treated with low concentration of HF/HNO(3) solution still had some particles, but there were much nano-holes on the titanium surface. The titanium plates treated with high concentration of HF/HNO(3) solution had no particles on the surface, but showed much micron-holes on the titanium surface. The titanium plates treated with H(2)SO(4)/HCl solution after HF/HNO(3) solution etching had all particles removed and got multilevel holes on the surface.The last H(2)O(2)/HCl method produced an anatase titania gel layer on the specimen surface.CONCLUSION:By altering the concentration of HF/HNO(3) solution, we could make different sizes of apertures on the titanium surface. Double acid-etching can remove all sandblasting particles embedded in titanium surfaces and form multilevel holes. The H(2)O(2)/HCl method can turn the rough non- crystallographic TiO(2) layer into the anatase titania gel layer.

The Surface Functionalization of a Near β Titanium Alloy TLM for Medical Application

Bioactive treatment of titanium surface using a H2O2/HCl solution

Superhydrophilic Surface Modification of Medical Near β-Type Titanium Alloy TLM

Surface Bio-Modification by TiO2 Film on Biomedical Titanium Alloy

Surface Characterization of Thermally Oxidized Titanium Alloys

Hydrothermal Surface Modification of Biomedical TiNb Based Alloy

Hydrothermal Surface Modification of a Low Modulus Ti-Nb Based Alloy

Activating Treatment of Titanium Surface and the Cell Corresponding Response

The Preparation of the Multilevel Holes and Analysis of the Pure Titanium Surface

Hydrothermal Pre-calcification and Bioactivity of Medical Near beta-Type Titanium Alloy TLM

Surface Bioactivation Through the Nanostructured Layer on Titanium Modified by Facile HPT Treatment

Histocompatibility and Osteogenic Activity of Ti-5Zr-6Mo-15Nb Alloy with Surface Modification by Porous TiO2/HA Coating

Effect of Surface Mechanical Attrition Treatment on Bioactivity of Biomedical Titanium Alloy

A Novel Method to Fabricate Organic-Free Superhydrophobic Surface on Titanium Substrates by Removal of Surface Hydroxyl Groups

[The effect of surface modification strategies on biological activity of titanium implant]

Effects Of Surface Nanocrystallization Of Titanium Alloy On Biological Behavior Of Osteoblast

Alkali and Thermal Treatment of Titanium and Its Effect on the Bioactivity

Spectroscopic Analysis of Titanium Surface Functional Groups under Various Surface Modification and Their Behaviors in Vitro and in Vivo

Sol–gel Derived Ag-containing TiO2 Films on Surface Roughened Biomedical NiTi Alloy

Hydrothermal Preparation of Antibacterial Ag-containing TiO2 Film on a Low-modulus Titanium Alloy

Surface Modification of NiTi Alloy by Sol-Gel Derived Porous TiO2 Film