Abstract:We present a novel electron transport (ET) polymer composed of polyfluorene grafted with a K(+)-intercalated crown ether involving six oxygen atoms (PFCn6:K(+)) for bulk-heterojunction polymer solar cells (PSCs) with regioregular poly(3-hexylthiophene) (P3HT) as the donor and indene-C(60) bisadduct (ICBA) or indene-[6,6]-phenyl-C(61)-butyric acid methyl ester (IPCBM) as the acceptor in the active layer and with Al or Ca/Al as the cathode. A remarkable improvement in the power conversion efficiency (PCE) (measured in air) was observed upon insertion of this ET layer, which increased the PCE from 5.78 to 7.5% for a PSC with ICBA and Ca/Al (5.53 to 6.63% with IPCBM) and from 3.87 to 6.88% for a PSC with ICBA and Al (3.06 to 6.21% with IPCBM). This ET layer provides multiple functionalities: (1) it generates an optical interference effect for redistribution of light intensity as an optical spacer; (2) it blocks electron-hole recombination at the interface with the cathode; (3) it forms an interfacial dipole that promotes the vacuum level of the cathode metal; and (4) it enhances electron conduction, as evidenced by (1) the increase in total absorption of 1:1 w/w P3HT:ICBA by a factor of 1.3; (2) the reduction in the hole-only current density profile by a factor of 3.3 at 2.0 × 10(5) V/cm; (3) the decrease of 0.81 eV in the work function of Al from 4.28 to 3.47 eV, as determined by UV photoelectron spectroscopy; and (4) the decrease in the series resistance of PSCs with ICBA and Al by a factor of 4.5, as determined by the current-voltage characteristic under dark conditions; respectively. The PSC of 7.5% is the highest among the reported values for PSC systems with the simplest donor polymer, P3HT.

Surface photovoltaic properties of AlClPc/Me-PTC composite films

An Investigation of Surface Photovoltaic Properties of TiOPc and AlClPc

Photovoltaic polarity inversion in thin films of titanoxophthalocyanine/N,N-bistolylperylene tetracarboxylic dimimide composite films

Photoconductive Properties Of Clalpccl And Clinpe Composite Thin Film Prepared By Physical Vapor Deposition Approach

Alternate heteroepitaxial growth of chloroindium phthalocyanine and chloroaluminum phthalocyanine ultrathin multilayered structure and its xerographic and optical properties

Influence of Deposition Substrate Temperature on the Morphology and Molecular Orientation of Chloroaluminum Phthalocyanine Films As Well the Performance of Organic Photovoltaic Cells

The Influence of Amino Group on PCDTBT-based and P3HT-based Polymer Solar Cells: Hole Trapping Processes

Optical Characterizations Of The Surface States In Hybrid Lead-Halide Perovskites

Surface electrical properties modulation by multimode polarizations inside hybrid perovskite films investigated through contact electrification effect

Photoconductivity study of silicon dichloride phthalocyanine

Hybrid Nanocomposites of All‐Inorganic Halide Perovskites with Polymers for High‐Performance Field‐Effect‐Transistor‐Based Photodetectors: An Experimental and Simulation Study

Dipole and Charge Effects of Chloroaluminum Phthalocyanine Revealed by Local Work Function Measurements at Sub-Molecular Level

Optomechanical switching of adsorption configurations of polar organic molecules by UV radiation pressure

Unfused Electronic Acceptor-Based Polymers as Interfacial Materials for Efficient Inverted Perovskite Solar Cells

Effect of 3,4,9,10-Perylenetetracarboxylic Bisbenzimidazole (ptcbi) As Well As Bathocuproine (bcp) and Ag Interlayer Thickness on the Performance of Organic Tandem Solar Cells

Multiple Functionalities of Polyfluorene Grafted with Metal Ion-Intercalated Crown Ether As an Electron Transport Layer for Bulk-Heterojunction Polymer Solar Cells: Optical Interference, Hole Blocking, Interfacial Dipole, and Electron Conduction.

Modeling of the photophysical and photovoltaic properties of an active layer based on the organic composite poly(2‐methoxy‐5‐(2‐ethyl‐hexyloxy)‐1,4‐phenylene‐vinylene) (MEH‐PPV)–poly(3‐hexylthiophene) (P3HT): (6,6)‐phenyl C61 butyric acid methyl ester (PCBM)

Water-Soluble Polymeric Interfacial Material for Planar Perovskite Solar Cells.

CH3NH3PbI3 and CH3NH3PbI3–xClx in Planar or Mesoporous Perovskite Solar Cells: Comprehensive Insight into the Dependence of Performance on Architecture

Aggregate structure and photovoltaic property of CuPc/D24DFPP co-deposition composite material

Temperature-Dependent Electric Field Poling Effects in CH3NH3PbI3 Optoelectronic Devices.