Abstract:Isothermal compression tests of 2196 Al-Cu-Li alloy were carried out at different temperatures (633∼793 K) and strain rates (0.001∼10 s−1) on Gleeble-3500 thermal simulator until the compression reached 60 %. According to the obtained stress-strain data, the flow behavior of 2196 Al-Li alloy during thermal deformation was investigated. The Arrhenius constitutive equation of the alloy based on the hyperbolic sine function model was established. A modified constitutive model with comprehensive consideration of deformation temperature, strain rate and strain compensation was proposed. Compared with the traditional constitutive model of strain compensation, the modified model had higher prediction accuracy. The hot processing maps under different strains (0.2∼0.8) were established, it was found that the plastic instability domain mainly occurred at the low temperature and high strain rate, while the peak power dissipation domain was located in the high temperature and medium strain rate. The microstructure evolution of 2196 Al-Li alloy under different deformation conditions was characterized and analyzed by electron back scattering diffraction and transmission electron microscope. The results showed that the softening mechanism was mainly dynamic recovery with a small amount of continuous dynamic recrystallization. High temperature and low strain rate were conducive to the occurrence of dynamic recovery and recrystallization, and the microstructure was mainly characterized by low dislocation density, no dislocation entanglement and dislocation wall structure. The grain boundary was straight and smooth. Some discontinuous dynamic recrystallization occurred at low temperature and high strain rate. Based on the analysis of the hot processing maps and microstructure evolution, the optimum deformation parameters of 2196 Al-Li alloy were determined to be 733∼793 K and 0.01∼1 s−1.

Cavitation Behavior of Fine-Grained 1420 Al-Li Alloy During Superplastic Deformation

Superplastic Behavior of an Al–Mg–Li Alloy

High-strain-rate Void Growth in High Entropy Alloys: Suppressed Dislocation Emission = Suppressed Void Growth

Revealing the Void Formation Mechanism during Superplastic Deformation of a Fine-Grained Ni–Co-Base Superalloy

Crystal Plasticity Based Investigation of Micro-Void Evolution under Multi-Axial Loading Conditions

Grain Structure and Microtexture Evolution During Superplastic Deformation of 5A90 Al-Li Alloy

Achieving high strain rate superplasticity in an Al-Cu-Li alloy processed by thermo-mechanical processing

Superplastic behavior of 1420Al-Li alloy

Formability and Cavitation Behavior of Superplastic Aa5083 Aluminum Alloy under Biaxial Tension

Superplasticity and Cavitation in AZ31 Mg Alloy at Elevated Temperatures

Effect of Temperature on Superplastic Deformation Behavior of 2198 Al–Cu–Li Alloy

Nanovoid Growth in BCCα-Fe: Influences of Initial Void Geometry

Dynamic recrystallization mechanism during warm deformation in 1420 alloy

Constitutive Analysis and Microstructure Characteristics of As-Homogenized 2198 Al–Li Alloy under Different Hot Compression Deformation Conditions

In-situ surface study on the mechanism of high-strain-rate superplasticity in an Al–Cu–Li alloy

Size effect on the plastic deformation of pre-void Ni/Ni3Al interface under uniaxial tension: A molecular dynamics simulation

Superplastic Behavior and Microstructure Evolution of a Fine-Grained Mg-Nd-Zn-Zr Alloy Processed by Hot Extrusion

Constitutive modeling and microstructure characterization of 2196 Al-Li alloy in various hot deformation conditions

The Influence of Casting Microvoids on the Constitutive Behavior of As-Quenched Al-Cu-Mn Alloy

Uncovering the effects of local pressure and cooling rates on porosity formation in AA2060 Al-Li Alloy

A multiscale investigation into the effect of grain size on void evolution and ductile fracture: experiments and crystal plasticity modeling