Abstract:Nanoindentation of Ni-based single crystal alloy which has a void defect is simulated by the molecular dynamics method. Three models with different voids which have a same radius but different depth (H=1.5 nm, 3.0 nm, 4.5 nm) are contrasted to the perfect model respectively. The influence of a void and misfit dislocation on nanoindentation process are analyzed using center symmetry parameter. Nucleation and growth of dislocation on various indentation depth are researched simultaneously. After relaxation, misfit dislocations occur in all models, which indicates that the void does not affect the generation of misfit dislocation in gamma/gamma' phase. The indentation load depth curves show the shallow void (H=1.5 nm) has the greatest influence on nanoindentation. The results demonstrate that the void has two different ways to affect the nanoindentation process. Initially, the void softens the materials when the indentation depth is less than 0.375 nm. However, it will hinder the growth of dislocations because of a kind of surface force, which causes the increase of indentation load while the indentation depth is between 0.375 nm and 0.567 nm. The collapse of a void absorbs the strain energy, so the amount of stacking faults nucleation in gamma phase in model with the shallow void is less than which in the perfect model. The indentation load-depth curves show that the indentation load in the H=1.5 nm model is larger than load in the perfect model at 1.263 nm indentation depth. But when the void collapses completely, dislocations tangle around the original location of the void and more stacking faults generate comparing to the perfect model at the same indentation depth h=1.743 nm. So the indentation load declines and becomes smaller than load in perfect model. If the void locates at the interface of gamma/gamma' phase (H=3.0 nm), it influence the nanoindentation process later than H=1.5 nm model. Dissociation of misfit dislocations is observed when the indentation depth arrives the maximum value 1.748 nm in H=3.0 nm model. Stairs form on the surface of gamma phase because of the dissociation of misfit dislocations. There is almost no influence on the nanoindentation of Ni-based single crystal alloy when the void locates in the gamma' phase (H=4.5 nm).

Size effect on the plastic deformation of pre-void Ni/Ni3Al interface under uniaxial tension: A molecular dynamics simulation

Atomic Simulation of Void Location Effect on the Void Growth in Nickel-Based Single Crystal

Molecular Dynamics Study on Mechanical Behaviors of Ti/Ni Nanolaminate with a Pre-Existing Void

Atomistic Simulation Analysis of the Effects of Void Interaction on Void Growth and Coalescence in a Metallic System

Orientation Effects on the Tensile Properties of Single Crystal Nickel with Nanovoid: Atomistic Simulation

Microstructure evolution and mechanical behavior of the Ni/Ni3Al interface under thermal-mechanical coupling

Effect of Interface Type on Deformation Mechanisms of Γ-Tial Alloy under Different Temperatures and Strain Rates by Molecular Dynamics Simulation

Void Configuration-Induced Change in Microstructure and Deformation Mechanisms of Nano-Porous Materials

Effect of Void on Nanoindentation Process of Ni-Based Single Crystal Alloy

Nanostructure, Plastic Deformation, and Influence of Strain Rate Concerning Ni/Al2O3 Interface System Using a Molecular Dynamic Study (LAMMPS)

Influence of Defects and Crystallographic Orientation on Mechanical Behavior of Nanocrystalline Aluminium

Interface coherency strain relaxation due to plastic deformation in single crystal Ni-base superalloys

The Effects of Grain Boundary Misorientation on the Mechanical Properties and Mechanism of Plastic Deformation of Ni/Ni3Al: A Molecular Dynamics Study

Molecular dynamics simulations of dislocation interaction with voids in nickel

Effect of biphasic interface on mechanical properties and deformation mechanism of nickel base alloy

Molecular dynamics study of void effect on nanoimprint of single crystal aluminum

Mechanical Response and Plastic Deformation in the B2-NiAl/Fe Interface: Molecular Dynamics Analysis

Effects of crystallographic orientation, temperature and void on tensile mechanical properties of Ni-Co single crystal nanopillars

The effect of void defect on the evolution mechanisms of dislocations and mechanical properties in nickel-based superalloys by molecular dynamics simulation of real γ/γ′ structures

Effect of void morphology on void facilitated plasticity in irradiated Cu/Nb metallic nanolayered composites

Tension-compression asymmetry in Ni/Ni 3 Al interfaces: An atomistic investigation