Abstract:This article focuses on the high-performance motion control problem of the hydraulic press. Smooth and precise motion control of the hydraulic press is hardly achieved due to the complex external disturbances which typically consist of the deformation force and friction force. An extended fuzzy disturbance observer is first constructed to estimate and compensate the hardly modeled deformation force. The proposed extended fuzzy disturbance observer differs with the fuzzy disturbance observer on parameter adaptation; the fuzzy disturbance observer is commonly driven by the disturbance observer error, while the designed extended fuzzy disturbance observer is driven by the disturbance observer error and the motion tracking error together. The nonlinear cascade controller is further applied to synthesize the motion controller considering the particular work principle of the separate meter-in separate meter-out drive system adopted in the hydraulic press. The outer motion tracking loop of the nonlinear cascade controller is designed based on the sliding mode control with the desired driving force as control output, and the inner pressure control loop of the nonlinear cascade controller uses the backstepping technique to make the separate meter-in separate meter-out drive system track the desired driving force precisely. The minimum equivalent load criterion is proposed to act as the bridge linking the outer and inner loop. The stability of the overall closed-loop system is proved based on the Lyapunov theory. The performance of the proposed scheme is verified through the simulations and experiments. The results demonstrate that the nonlinear cascade controller together with the extended fuzzy disturbance observer provides an excellent motion tracking performance in the presence of complex external disturbances.

Position Servo Control of the Slider in Double Toggle Mechanical Press Using Bezier Curve Model and Fuzzy Control

Slider Position Servo Control of the Double Toggle Mechanical Press Directly Driven by Transverse Flux Machine

Research on Hybrid-loop Servo Control System of Double Toggle Mechanical Press for Achieving Flexible Process

High-performance Motion Control of the Hydraulic Press Based on an Extended Fuzzy Disturbance Observer

A New Fuzzy Self-Tuning Method for Controlling Packing Pressure of a High-Accuracy Injection Molding Machine

Hybrid-loop Servo Control System of Double Toggle Mechanical Press for Flexible Forming Process Based on Sliding Mode Control and Neural Network Techniques.

Simultaneous Control of Motion and Maximized Stiffness for an Electro-Pneumatic Clutch Actuator Based on Pressure Observers

High Performance Pressure Control for the Hydraulic Press Based on the Soft Relief Fuzzy Pid Controller

Servo Press Processing Bezier-Model with Optimum

Trajectory Planning of Servo Press Based on Improved Composite Trigonometric Functions

Precision Control of A Piezo-Actuate System Using Fuzzy Sliding-Mode Control with Feedforward Predictor-Based Compensation

The Intelligent Learning Control On Slide Position Of Mechanical Crank Press

Design Research of Drive System for Crank Toggle Servo Press

Optimization of Pressure Side Slider Series Four bar Linkage Working Mechanism Used by Double action Press

Design and Research of a Novel Type of Mechanical Presses Driven by Three Servo Motors in Parallel

Application of RBF neural network and sliding mode control for a servo mechanical press

Motion profile optimization of servo press in deep drawing process of SUS 304 stainless steel sheets

Self-Tuning Fuzzy Control of Switched Reluctance Motor Directly-driven Hydraulic Press

Simulation of Flexible Control Model of Servo Press with Loads Directly Driven by SRM

High-accuracy Servo Press System for the Clinching Joint Process

Fuzzy Iterative Learning Control of Electro-Hydraulic Servo System for Srm Direct-Drive Volume Control Hydraulic Press