Abstract:The strategy for disposal of high-level radioactive waste in china is to enclose the spent nuclear fuel in sealed metal canisters which are embedded in bentonite clay hundreds meters deep in the bed-rock.The choice of container material depends largely on the redox conditions and the aqueous environment of the repository.One of the choices for the fabrication of waste canisters is copper, for it is thermodynamically stable under the saline,anoxic conditions over the large majority of the container lifetime.For this advantage,some other countries(Canada,Sweden) have selected copper as the material of nuclear waste container.However,in the early aerobic phase of the geological disposal the corrosion of copper could take place,and the corrosion behavior of copper would be influenced by the complex chemical conditions of groundwater markedly.Regularly,in atmosphere environment the semiconductor passive film which is constructed by Cu_2O would generate on the surface of copper.On the one hand,the Cu_2O film could protect copper from corrosion.On the other hand,the formation of Cu_2O film is necessary to maintain the propagation of crack during the stress corrosion cracking. Therefore,the study of the effect of water chemistry conditions on the stability of Cu_2O passive film makes great sense for the general corrosion and stress corrosion cracking of copper.For copper and copper alloy,Cl~- is a highly aggressive ion.Lots of cases of failure and corrosion behavior of copper and copper alloy in Cl~- environment have been studied.The immersion of Cl~- would affect the semiconductor properties of Cu_2O,therefore,we focused on the effect of pH and Cl~- concentration on the corrosion behavior and semiconductor properties of Cu_2O in this paper.The polarization behavior of Cu electrodes and the stability of passive film Cu_2O in boric acid buffer solution have been investigated respectively by potentiodynamic polarization,electrochemical impedance spectroscopy (EIS) and semiconductor capacitance method(Mott-Schottky method).The results showed that the destruction and dissolution of the passive film Cu_2O happened in the conditions of low pH and high Cl~- concentration.The semiconductor character of passive film changed from p-type into n-type in the solution with high Cl~- concentration,so that Cl~- is more likely to enter the passive film and take complex reaction with Cu~+,which could destroy the passive film and accelerate corrosion.The passive film Cu_2O is more steady in the condition of high pH and low Cl~- concentration.

Research summaries on the chloride ions corrosion of copper-alloyed condenser in heat power plants

Study on the capacities of scale & corrosion inhibitors used for the circulating cooling water in 300 MW thermal power generating units

Corrosion of power plant's copper tubes on different water quality conditions

CORROSION AND PROTECTION OF CONDENSERS IN XUZHOU POWER PLANT

Influence of SO4 2- and Cl- the corrosion behavior of copper tube in air-conditioning system

A laboratory study of the failure analysis of copper tube used in the air conditioning heat exchanger

Influence Factors on Pitting Corrosion of HSn701-B Copper Alloy in Circulating Cooling Water of Power Plant

CORROSION OF TUBULAR COPPER CONDUCTOR IN WATER-COOLING GENERATOR

Prevention of Tubular Copper Conductor in Water-Cooling Generator

Research Progress on Copper Alloys with High Anticorrosion As Heat Exchanger

A corrosion study of metals in the reclaimed water

Electrochemical Researches on the Pre-film Plan for the Circulating Cooling Water in Copper Alloy Pipe

Fabrication of Environmentally Friendly Superhydrophobic Coatings for Corrosion Protection under Simulated Conditions of Antifreeze Solutions for Heat-Source Tower

Effect of Electrochemical Corrosion on Performance of Tube-Fin Heat Exchanger

Study on the Influences of Ammonia Nitrogen in Reclaimed Water on the Circulating Cooling Water System of Power Plants

PRESENT SITUATION ON RESEARCH OF CORROSION INHIBITION TECHNOLOGY FOR CUPPER AND ITS ALLOYS

Effect of ions on carbon steel corrosion in cooling systems with reclaimed wastewater as the alternative makeup water

The Research to Corrosion Resistance of Stainless Steel Dot Matrix Plate with Copper Brazing in Heat Exchanger

Effective Protection for Copper Corrosion by Two Thiazole Derivatives in Neutral Chloride Media: Experimental and Computational Study

EFFCTS OF pH AND Cl− CONCENTRATION ON THE CORROSION BEHAVIOR OF COPPER IN BORIC ACID BUFFER SOLUTION

Research and Design of Synthetic Protection for Heat Exchanger