Abstract:Ion mixing of multiple metal layers was conducted at 77 K in five selected binary metal systems, i.e. the Ag-Cr, Co-Cu, Cu-Fe, Fe-Mo and Fe-Nd systems, which all have a nearly zero or positive heat of formation (Δ H For ). TEM examination showed a common microscopic feature of localized amorphization after high dose ion irradiation, i.e. the amorphous phase was frequently interspersed in a crystalline matrix. EDS analysis was therefore carried out to determine the actual compositions of the phases formed. It revealed that all local amorphous regions resided within rather narrow composition ranges. The narrow range found here for amorphization is probably the reason that amorphous alloy formation was difficult in these systems. After comparing these observations with those reported earlier for the some 30 systems so far studied, it is found that the behaviour of ion mixing induced amorphization, and hence the binary metal systems, can be classified into two categories. The first category contains the readily amorphous phase forming systems and usually features very limited terminal solid solubilities along with large negative heat of formation. Typical examples are the Au-Ti, Ni-Mo, Ni-Nb and Ru-Zr systems. In these systems amorphization can be achieved over a wide composition range once a minimum dose is reached. For systems in the second category, amorphization is only allowed in a rather narrow composition range, as in the systems studied here. This is also the case when a system has a large solid solubility, even though its Δ H For is rather negative, e.g. the Mo-Ru and Au-V systems. In such situations, the results of phase formation may be sensitive to the composition as well as to the ion irradiation dose. The possible mechanism responsible for the different behaviors of phase formation by ion mixing are also discussed.

Comparative Study of Irradiation-induced and Thermally Induced Structural Phase Transitions in Equilibrium Immiscible Fe–Ag Systems

Structural Phase Transition Induced by Ion Irradiation in the Equilibrium Immiscible Ag–Co System

Metastable Phases Induced by Ion Irradiation in the Equilibrium Immiscible Fe–Cu System

Metastable Phase Formation in the FeCu System by Ion Irradiation and Solid State Interdiffusion

Formation of A Metastable Cubic Phase in an Immiscible Fe-Ag System by Ion Mixing

Structural Phase Evolution in the Equilibrium Immiscible Co–Cu System Studied by Solid-State Reaction/Ion Beam Mixing of Nano-Sized Multilayers

Formation and structural anomaly of the metastable phases in an immiscible Ag - Mo system studied by ion beam mixing and molecular dynamics simulation

An Icosahedral Phase Formed During Annealing of Ion-Irradiated Fe-Mo Amorphous Films

Irradiation induced non-equilibrium phase formation and structural transformation in the Fe–Ti–Nb multilayered films

Different Behaviors Of Amorphization Induced By Ion Mixing

Some New Structural Transformations Induced By Ion-Beams

Ion Mixing to Synthesize Amorphous and Metastable Crystalline Alloys in the Fe-Ta System

Non-equilibrium Alloy Phase Formation and Transformation Driven by Ion Beam Mixing in the Fe-Hf-Nb Multilayers

Microstructure evolution in a Fe-Ni-Si alloy during heat treatment and electron irradiation

Formation of Quasicrystalline Phases in the Equilibrium Immiscible Co-Cu and Fe-Cu Systems by Ion Mixing/Solid-State Reaction

Unusual Alloying Behavior Observed in the Immiscible AgMo and AgNb Systems under Ion Irradiation

Non-equilibrium Phases in the Fe–Rh System Studied by Ion Beam Mixing and Ab Initio Calculation

Structural phase transition in the Hf–Ni system studied by ab initio calculation and ion beam mixing

Phase Equilibria of the Binary Ag-In System

Structural phase transition in the Fe–Ta system studied by ion beam mixing

Solid State Phase Transition Induced by Ion Irradiation in the Co-Nb System: Experiments and Thermodynamics