Abstract:Ammonium sulfate (AS) is of interest as an additive in stationary combustion plants for the simultaneous control of NOx (through selective noncatalytic reduction, SNCR) and deposition and corrosion (through sulfation of alkali chlorides). The SNCR performance of ammonium sulfate was evaluated through experiments in a laboratory-scale flow reactor. Experiments with 5 and 10 wt % aqueous ammonium sulfate solutions, corresponding to AS/NO ratios above 1, yielded NO reductions up to 95% in a temperature interval of 1025–1075 °C. The results indicated that sulfur from ammonium sulfate is mainly released as SO3, even though SO2 is detected in increasing concentrations at temperatures above 1000 °C. Addition of KCl to the SNCR process was shown to promote the reaction at lower temperatures, extending the temperature window for reduction by 50 °C. Furthermore, ammonium sulfate facilitated a high degree of KCl sulfation at or below 1000 °C, demonstrating the potential of using ammonium sulfate to simultaneously reduce NOx and corrosion in full-scale combustion plants. The experiments were analyzed in terms of a detailed kinetic model. The SNCR experiments using ammonium sulfate were described satisfactorily by the model, although the NO reduction at the optimum was slightly underestimated. Also, the sulfation of KCl was captured well, but the promoting effect of KCl on SNCR with ammonium sulfate was greatly underestimated. Possible reasons for this discrepancy were discussed.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c01451?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c01451</a>.Droplet size measurements; additive feed quantification; experimental overview; measured temperature profiles; urea SNCR experiments; and EDX characterization of filter samples (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c01451/suppl_file/ef1c01451_si_001.pdf">PDF</a>)AS mechanism merged (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c01451/suppl_file/ef1c01451_si_002.txt">TXT</a>)Thermo all (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c01451/suppl_file/ef1c01451_si_003.txt">TXT</a>)This article has not yet been cited by other publications.

Development and Validation of A Reduced Mechanism for Urea-Based Sncr Process Based on Qss Graph

In Situ Loading of Cu2O Active Sites on Island-like Copper for Efficient Electrochemical Reduction of Nitrate to Ammonia.

Reduced Mechanism for Hybrid NOx Control Process

Mechanism Validation and Analysis of the Selective Non-catalytic Reduction Reaction with Methane Additive

Selective Noncatalytic Reduction of NO x Using Ammonium Sulfate

Action of oxygen and sodium carbonate in the urea-SNCR process

Enhancement of the Ammonia Kinetic Mechanism for Nitrogen-Based Pollutant Chemistry

Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst

Experimental Study and Mechanism Analysis on Selective Non-Catalytic Reduction Reactions

Mechanism Reduction and Computational Fluid Dynamic Simulation of Selective Non-catalytic Reduction Reacting Flow in Drop Tube Furnace

Simulation and Optimization of SNCR Process

A Criterion Based on Computational Singular Perturbation for the Identification of Quasi Steady State Species: A Reduced Mechanism for Methane Oxidation with NO Chemistry

Experimental and Modeling Study on the Mechanism and Sensitive Parameters of the Thermal DeNOx Process

SNCR De-NOx within a moderate temperature range using urea-spiked hydrazine hydrate as reductant

Reduced Chemical Reaction Mechanisms for Simulating Sodium Emissions by Solid-Fuel Combustion

Full-Scale Numerical Investigation of a Selective Noncatalytic Reduction (SNCR) System in a 100 MW Utility Boiler with Complex Chemistry and Decoupling Approach

The mechanism of selective catalytic reduction of NO x on Cu-SSZ-13 - a computational study.

A temporal discretization and spatial integration SCR model with dual temperature-related parameters

Mechanism-Based Kinetic Modeling of N2o Formation on Scr Activity over Cu-Ssz-13 Catalysts for Diesel Vehicle

Reaction Characteristics of NOx and N2O in Selective Non-Catalytic Reduction Using Various Reducing Agents and Additives

Urea-related Reactions and Their Active Sites over Cu-SAPO-34: Formation of NH3 and Conversion of HNCO