Kähler-Einstein Surfaces with Nonpositive Bisectional Curvature

FY ZHENG

DOI: https://doi.org/10.1090/s0002-9939-1994-1200182-5

IF: 0.9709

1994-01-01

Proceedings of the American Mathematical Society

Abstract:In this note we show that, for a Kahler-Einstein surface M with negative Ricci curvature and nonpositive bisectional curvature, if the cotangent bundle of M is not quasi-ample then M is a quotient of the bidisc.

What problem does this paper attempt to address?

Compact Kähler Manifolds with Positive Orthogonal Bisectional Curvature

Huitao Feng,Kefeng Liu,Xueyuan Wan

DOI: https://doi.org/10.4310/mrl.2017.v24.n3.a7

2017-01-01

Mathematical Research Letters

Abstract:In this short note, using Siu-Yau's method [14], we give a new proof that any n-dimensional compact Kahler manifold with positive orthogonal bisectional curvature must be biholomorphic to P-n.
On Positive Scalar Curvature and Moduli of Curves

Kefeng Liu,Yunhui Wu

DOI: https://doi.org/10.4310/jdg/1549422104

2019-01-01

Journal of Differential Geometry

Abstract:In this article we first show that any finite cover of the moduli space of closed Riemann surfaces of genus $g$ with $g\geq 2$ does not admit any Riemannian metric $ds^2$ of nonnegative scalar curvature such that $ds^2 \succ ds_{T}^2$ where $ds_{T}^2$ is the Teichm\"uller metric. Our second result is the proof that any cover $M$ of the moduli space $\mathbb{M}_{g}$ of a closed Riemann surface $S_{g}$ does not admit any complete Riemannian metric of uniformly positive scalar curvature in the quasi-isometry class of the Teichm\"uller metric, which implies a conjecture of Farb-Weinberger.
Curvatures of Moduli Space of Curves and Applications

Kefeng Liu,Xiaofeng Sun,Xibei Yang,Shing–Tung Yau

DOI: https://doi.org/10.4310/ajm.2017.v21.n5.a3

2017-01-01

Abstract:In this paper, we investigate the geometry of the moduli space of curves by using the curvature properties of direct image sheaves of vector bundles. We show that the moduli space $(M_g, \omega_{WP})$ of curves with genus $g>1$ has dual-Nakano negative and semi-Nakano-negative curvature, and in particular, it has non-positive Riemannain curvature operator and also non-positive complex sectional curvature. As applications, we prove that any submanifold in $M_g$ which is totally geodesic in $A_g$ with finite volume must be a ball quotient. We also show that, on a Kodaira (deformation) surface, there is no K\"ahler metric with non-positive Riemannain sectional curvature although it possesses K\"ahler metrics with strictly negative holomorphic bisectional curvature.
Positive Kobayashi Curvature Metrics on Ample Vector Bundles

Huitao Feng,Kefeng Liu,Xueyuan Wan

2018-01-01

Abstract:In this short note, we prove that a complex Finsler vector bundle with positive Kobayashi curvature must be ample, which partially solves a problem of S. Kobayashi posed in 1975. As applications, a strongly pseudoconvex complex Finsler manifold with positive Kobayashi curvature must be biholomorphic to the complex projective space; we also show that all Schur polynomials are numerically positive for complex Finsler vector bundles with positive Kobayashi curvature.
Complex Finsler Vector Bundles with Positive Kobayashi Curvature

Huitao Feng,Kefeng Liu,Xueyuan Wan

DOI: https://doi.org/10.4310/mrl.2020.v27.n5.a3

2020-01-01

Mathematical Research Letters

Abstract:In this short note, we prove that a complex Finsler vector bundle with positive Kobayashi curvature must be ample, which partially solves a problem of S. Kobayashi posed in 1975. As applications, a strongly pseudoconvex complex Finsler manifold with positive Kobayashi curvature must be biholomorphic to the complex projective space; we also show that all Schur polynomials are numerically positive for complex Finsler vector bundles with positive Kobayashi curvature.
Kähler manifolds with slightly positive bisectional curvature

Hung-Hsi Wu,Fangyang Zheng

DOI: https://doi.org/10.1090/conm/332/05944

2003-01-01

Abstract:Let M be an n-dimensional complete Kähler manifolds with everywhere nonnegative or everywhere nonpositive bisectional curvature. In this article, we address the question of when the universal covering space M̃ of M is holomorphically isometric to Cn−r × N, where N is a Kähler manifold whose Ricci tensor is nondegenerate somewhere. It is now known that such is the case if M covers a compact Kähler manifold, its bisectional curvature is everywhere nonpositive, and the metric is real analytic. We prove in this article that, still with the real analytic assumption on the metric, such a splitting also takes place if the bisectional curvature of M is everywhere nonnegative but is positive
Rational curves on Hermitian manifolds

Huitao Feng,Kefeng Liu,Xueyuan Wan,Xiaokui Yang

2014-01-01

Abstract: By using analytic method, we prove that there exist rational curves on compact Hermitian manifolds with positive holomorphic bisectional curvature. It confirms a question of S.-T. Yau. It is well-known that Mori proved in \cite{Mori79} that every compact complex manifold $N$ with $c_1(N)>0$ contains at least one rational curve. However, as a borderline example, we show that the standard Hopf surface $S^1\times S^3$ has a Hermitian metric with non-negative holomorphic bisectional curvature (in particular, $c_1(S^1\times S^3)\geq 0$), but it contains no rational curve.
On Real Kähler Euclidean Submanifolds with Non-Negative Ricci Curvature

LA Florit,WS Hui,FY Zheng

DOI: https://doi.org/10.4171/jems/19

2005-01-01

Journal of the European Mathematical Society

Abstract:We show that any real Kahler Euclidean submanifold f : M-2n --> R2n+p with either non-negative Ricci curvature or non-negative holomorphic sectional curvature has index of relative nullity greater than or equal to 2n - 2p. Moreover, if equality holds everywhere, then the submanifold must be a product of Euclidean hypersurfaces almost everywhere, and the splitting is global provided that M-2n is complete. In particular, we conclude that the only real Kahler submanifolds M-2n in R-3n that have either positive Ricci curvature or positive holomorphic sectional curvature are products of n orientable surfaces in R-3 with positive Gaussian curvature. Further applications of our main result are also given.
A Note on Kahler-Ricci Soliton

Xiuxiong Chen,Song Sun,Gang Tian

DOI: https://doi.org/10.1093/imrp/rnp056

2009-01-01

International Mathematics Research Notices

Abstract:In this note we provide a proof of the following: Any compact KRS with positive bisectional curvature is biholomorphic to the complex projective space. As a corollary, we obtain an alternative proof of the Frankel conjecture by using the K\"ahler-Ricci flow.
On Complete Noncompact Kähler Manifolds with Positive Bisectional Curvature

Bing-Long Chen,Xi-Ping Zhu

DOI: https://doi.org/10.1007/s00208-003-0385-1

2003-01-01

Mathematische Annalen

Abstract:. We prove that a complete noncompact Kähler manifold M n of positive bisectional curvature satisfying suitable growth conditions is biholomorphic to a pseudoconvex domain of C n and we show that the manifold is topologically R 2 n . In particular, when M n is a Kähler surface of positive bisectional curvature satisfying certain natural geometric growth conditions, it is biholomorphic to C 2 .
Kähler Manifolds and Cross Quadratic Bisectional Curvature

Lei Ni,Fangyang Zheng

DOI: https://doi.org/10.4171/jems/1405

2023-01-01

Journal of the European Mathematical Society

Abstract:In this article we continue the study of the two curvature notions for Kähler manifolds introduced by the first named author earlier: the so-called cross quadratic bisectional curvature (CQB) and its dual (^dCQB). We first show that compact Kähler manifolds with CQB_1>0 or ^dCQB_1>0 are Fano, while nonnegative CQB_1 or ^dCQB_1 leads to a Fano manifold as well, provided that the universal cover does not contain a flat de Rham factor. For the latter statement we employ the Kähler-Ricci flow to deform the metric. We conjecture that all Kähler C-spaces will have nonnegative CQB and positive ^dCQB. By giving irreducible such examples with arbitrarily large second Betti numbers we show that the positivity of these two curvature put no restriction on the Betti number. A strengthened conjecture is that any Kähler C-space will actually have positive CQB unless it is a ℙ^1 bundle. Finally we give an example of non-symmetric, irreducible Kähler C-space with b_2>1 and positive CQB, as well as compact non-locally symmetric Kähler manifolds with CQB<0 and ^dCQB<0.
Complete Kähler manifolds with nonnegative Ricci curvature

Gang Liu

2024-04-12

Abstract:We consider complete Kähler manifolds with nonnegative Ricci curvature. The main results are: 1. When the manifold has nonnegative bisectional curvature, we show that $\lim\limits_{r\to\infty}\frac{r^{2}}{vol(B(p, r))}\int_{B(p, r)}S$ exists. In other words, it depends only on the manifold. This solves a question of Ni. Also, we establish estimates among volume growth ratio, integral of scalar curvature, and the degree of polynomial growth holomorphic functions. The new point is that the estimates are sharp for any prescribed volume growth rate. 2. We discover a strong rigidity for complete Ricci flat Kähler metrics. Let $M^n (n\geq 2)$ be a complete Kähler manifold with nonnegative Ricci curvature and Euclidean volume growth. Assume either the curvature has quadratic decay, or the Kähler metric is $dd^c$-exact with quadratic decay of scalar curvature. If one tangent cone at infinity is Ricci flat, then $M$ is Ricci flat. In particular, the tangent cone is unique. In other words, we can test Ricci flatness of the manifold by checking one single tangent cone. This seems unexpected, since apriori, there is no equation on $M$ and the Bishop-Gromov volume comparison is not sharp on Ricci flat (nonflat) manifolds. Such result is in sharp contrast to the Riemannian setting: Colding and Naber showed that tangent cones are quite flexible when $Ric\geq 0$ and $|Rm|r^2<C$. This reveals subtle differences between Riemannian case and Kähler case. The result contains lots of examples, such as all noncompact Ricci flat Kähler surfaces of Euclidean volume growth (hyper-Kähler ALE 4-manifolds classified by Kronheimer), higher dimensional examples of Tian-Yau type, as well as an example with irregular cross section. It also covers Ricci flat Kähler metrics of Euclidean volume growth on Stein manifolds with $b_2 = 0$(e.g., $\mathbb{C}^n$).

Differential Geometry,Complex Variables
Hirzebruch–Kato Surfaces, Deligne–Mostow’s Construction, and New Examples of Negatively Curved Compact Kähler Surfaces

Fy Zheng

DOI: https://doi.org/10.4310/cag.1999.v7.n4.a4

1999-01-01

Communications in Analysis and Geometry

Abstract:In this article, we shall use the construction of Hirzebruch, Hofer, Kato, and Deligne-Mostow on compact complex 2-ball quotients to construct further finite Galois coverings over them, and by the analytical result of [M-S] and [Z], these coverings will admit Kahler metrics which are quasi-negatively curved, or negatively curved when the branching locus is smooth.
Quasi-positive curvature and vanishing theorems

Kai Tang

2024-05-09

Abstract:In this paper, we consider mixed curvature $\mathcal{C}_{a,b}$, which is a convex combination of Ricci curvature and holomorphic sectional curvature introduced by Chu-Lee-Tam. We prove that if a compact complex manifold M admits a Kähler metric with quasi-positive mixed curvature and $3a+2b\geq0$, then it is projective. If $a,b\geq0$, then M is rationally connected. As a corollary, the same result holds for k-Ricci curvature. We also show that any compact Kähler manifold with quasi-positive 2-scalar curvature is projective. Lastly, we generalize the result to the Hermitian case. In particular, any compact Hermitian threefold with quasi-positive real bisectional curvature have vanishing Hodge number $h^{2,0}$. Furthermore, if it is Kählerian, it is projective.

Differential Geometry
On Kähler manifolds with non-negative mixed curvature

Jianchun Chu,Man-Chun Lee,Jintian Zhu

2024-08-26

Abstract:In this work, we investigate compact Kähler manifolds with non-negative or quasi-positive mixed curvature coming from a linear combination of the Ricci and holomorphic sectional curvature, which covers various notions of curvature considered in the literature. Specifically, we prove a splitting theorem, analogous to the Cheeger-Gromoll splitting theorem, for complete Kähler manifolds with non-negative mixed curvature containing a line, and then establish a structure theorem for compact Kähler manifolds with non-negative mixed curvature. We also show that the Hodge numbers of compact Kähler manifolds with quasi-positive mixed curvature must vanish. Both results are based on the conformal perturbation method.

Differential Geometry,Complex Variables
Ricci flow on Kähler-Einstein surfaces

X.X. Chen,G. Tian

DOI: https://doi.org/10.1007/s002220100181

IF: 3.128

2002-01-01

Inventiones mathematicae

Abstract:. In this paper, we prove that if M is a Kähler-Einstein surface with positive scalar curvature, if the initial metric has nonnegative sectional curvature, and the curvature is positive somewhere, then the Kähler-Ricci flow converges to a Kähler-Einstein metric with constant bisectional curvature. In a subsequent paper [7], we prove the same result for general Kähler-Einstein manifolds in all dimension. This gives an affirmative answer to a long standing problem in Kähler Ricci flow: On a compact Kähler-Einstein manifold, does the Kähler-Ricci flow converge to a Kähler-Einstein metric if the initial metric has a positive bisectional curvature? Our main method is to find a set of new functionals which are essentially decreasing under the Kähler Ricci flow while they have uniform lower bounds. This property gives the crucial estimate we need to tackle this problem.
Hirzebruch Manifolds and Positive Holomorphic Sectional Curvature

Bo Yang,Fangyang Zheng

DOI: https://doi.org/10.5802/aif.3303

2019-01-01

Annales de l’institut Fourier

Abstract:This paper is the first step in a systematic project to study examples of Kahler manifolds with positive holomorphic sectional curvature (H > 0). Hitchin proved that any compact Kahler surface with H > 0 must be rational and he constructed such examples on Hirzebruch surfaces M-2,M-k = P(H-k circle plus 1(CP1)). We generalize Hitchin's construction and prove that any Hirzebruch manifold M-n,M-k =F(H-k circle plus 1(CPn-1)) admits a Kahler metric of H > 0 in each of its Kahler classes. We demonstrate that pinching behaviors of holomorphic sectional curvatures of new examples differ from those of Hitchin's which were studied in the recent work of Alvarez-Chaturvedi-Heier. Some connections to previous works on the Kahler-Ricci flow on Hirzebruch manifolds are also discussed. It seems interesting to study the space of all Kahler metrics of H > 0 on a given Kahler manifold. We give higher dimensional examples such that some Kahler classes admit Kahler metrics with H > 0 and some do not.
Positively Curved Complete Noncompact Kähler Manifolds

Chen Binglong,Zhu Xiping

DOI: https://doi.org/10.1016/s0252-9602(09)60073-4

2009-01-01

Acta Mathematica Scientia

Abstract:In this paper we give a partial affirmative answer to a conjecture of Greene-Wu and Yau. Among other things, we prove that a complete noncompact Kahler surface with positive and bounded sectional curvature and with finite analytic Chern number c1(M)2 is biholomorphic to ℂ2.
A uniformization theorem for complete non-compact Kahler surfaces with positive bisectional curvature

Binglong Chen,SiuHung Tang,Xiping Zhu

DOI: https://doi.org/10.4310/jdg/1102091357

2004-01-01

Journal of Differential Geometry

Abstract:In this paper, by combining techniques from Ricci flow and algebraic geometry, we prove the following generalization of the classical uniformization theorem of Riemann surfaces. Given a complete non-compact complex two dimensional Kahler manifold M of positive and bounded holomorphic bisectional curvature, suppose its geodesic balls have maximal volume growth, then M is biholomorphic to C-2. This gives a partial affirmative answer to the well-known conjecture of Yau [41] on uniformization theorem. During the proof, we also verify an interesting gap phenomenon, predicted by Yau [42], which says that a Kahler manifold as above automatically has quadratic curvature decay at infinity in the average sense.
On Kähler Manifolds with Positive Orthogonal Bisectional Curvature

X. X. Chen

DOI: https://doi.org/10.1016/j.aim.2006.11.006

IF: 1.675

2007-01-01

Advances in Mathematics

Abstract:For any irreducible Kähler manifold which admits positive orthogonal bisectional curvature and C1>0, if this positivity condition is preserved under the flow, then the underlying manifold is biholomorphic to CPn.

Kähler-Einstein Surfaces with Nonpositive Bisectional Curvature

Compact Kähler Manifolds with Positive Orthogonal Bisectional Curvature

On Positive Scalar Curvature and Moduli of Curves

Curvatures of Moduli Space of Curves and Applications

Positive Kobayashi Curvature Metrics on Ample Vector Bundles

Complex Finsler Vector Bundles with Positive Kobayashi Curvature

Kähler manifolds with slightly positive bisectional curvature

Rational curves on Hermitian manifolds

On Real Kähler Euclidean Submanifolds with Non-Negative Ricci Curvature

A Note on Kahler-Ricci Soliton

On Complete Noncompact Kähler Manifolds with Positive Bisectional Curvature

Kähler Manifolds and Cross Quadratic Bisectional Curvature

Complete Kähler manifolds with nonnegative Ricci curvature

Hirzebruch–Kato Surfaces, Deligne–Mostow’s Construction, and New Examples of Negatively Curved Compact Kähler Surfaces

Quasi-positive curvature and vanishing theorems

On Kähler manifolds with non-negative mixed curvature

Ricci flow on Kähler-Einstein surfaces

Hirzebruch Manifolds and Positive Holomorphic Sectional Curvature

Positively Curved Complete Noncompact Kähler Manifolds

A uniformization theorem for complete non-compact Kahler surfaces with positive bisectional curvature

On Kähler Manifolds with Positive Orthogonal Bisectional Curvature