Abstract:Transverse mechanical properties of titanium matrix composites (TMCs) play an important role during its engineering service. Although SiCf / TC17 composite is one of the most promising TMC candidates for aeroengine, as we know its transverse properties have not been reported yet until now. In this work, the transverse strength of single SiC fiber reinforced TC17 composite was evaluated using cruciform specimen. The surface and cross-section of fractured specimen were investigated by SEM to determine the failure position during tensile test. Finite element simulation method was also used to analyze the mechanism of interfacial failure and crack propagation. During the transverse tensile test of single fiber specimen, the initial non-linearity in the stress-strain curve occurred at the stress of (271 +/- 12) MPa, which indicated the beginning of fiber-matrix interface failure. SEM observation showed that the crack in the center of sample appeared at the interface of reaction layer and carbon coating with a 24 degrees similar to 68 degrees angle to the applied loading direction and its length extended with the increase of the applied stress. The finite element simulation results based on bilinear cohesive element model showed that transverse fracture of composite interface was shear failure mode, which agreed well with the test results. Before the occurrence of non-linearity in the stress-strain curve, the crack initiated at the circular interface between reaction layer and carbon coating with a 40 degrees similar to 50 degrees angle to the applied loading direction. Crack initiation locations in test samples were different with those in simulation samples, because the actual composite interface was rough and some micro-flaws formed in the interface, whereas it was assumed to be an ideal rigid interface for simulation. Then the crack propagated along both circumferential and axial directions because of the shear stress. With the crack growing, the interface close to 0 degrees angle to the applied loading direction failed first caused by the radial tensile stress, whereas the interface near 90 degrees failed later as a result of circumferential shear stress. After complete failure of the interface, stress redistribution occurred around the SiC fiber and the interface separation increased with the increasing of the applied load, which gave rise to the yielding and deforming of the matrix near fiber until the final fracture of the composite.

Study of Strength and Its Reliability of SiC Fiber Bundle by Experimental and Monte-Carlo Simulation Approach

Research on Piezoresistive Effect and Random Model of Carbon Fiber Bundle

Effect of Strain Rate on the Mechanical Behaviors of SiC Fiber

Experimental and Numerical Study on the Bending Behavior of Satin-Woven SiCf/SiC Composites

Measurement and Evaluation of the Tensile Strength of CVD SiC Fibers with Carbon Coating

A Pull-out Equivalent Telescopic Layered Failure Model of Carbon Fiber Bundles in Seawater Sea-Sand Cementitious Matrix

Monte-Carlo Simulation on the Failure of Fiber in a Single Filament Composite

A Monte Carlo finite element simulation of damage and failure in SiC/Ti–Al composites

Study on the Mechanical Property of High‐Performance Silicon Carbide Fiber

A Note On The Monte-Carlo Simulation Of The Tensile Deformation And Failure Process Of Unidirectional Composites

An Experimental Study on the in Situ Strength of Sic Fibre in Unidirectional Sic/Al Composites

Multi-scale Progressive Damage and Failure Behavior Analysis of Three-Dimensional Winding SiC Fiber-Reinforced SiC Matrix Composite Tube

Experimental and Numerical Investigations of Tensile Properties of SiC Particle‐Reinforced Composites

Effect of Specimen Size on Strength Reliability of Fiber Reinforced Composite

Study on the folding damage mechanism of SiC fiber braided fabric based on synchrotron radiation CT and finite-element analysis

Analysis of Multi-scale Failure Behavior of SiC f /SiC Composite Clad Tube under Flexible Clamping Damage

Research on Single SiC Fiber Reinforced TC17 CompositesUnder Transverse Tension

A Dynamic Monte-Carlo Simulation For Unidirectional Composites Under Tensile Impact

FE simulation of uniaxial tensile behavior of SiC reinforced AA5083 alloy

Modification of the model for calculating the long SiC fibre-reinforced metal matrix composites transverse strength and study for interfacial influences

Experimental and Numerical Analysis of Progressive Damage of SiCf/SiC Composite under Three-Point Bending