OpenGL Solutions for Multiple Platform

ZHAO Hai-tao,ZHANG Xiao-ming,FAN Shuang-li,TIAN Zhuo,CHEN Lei

DOI: https://doi.org/10.3969/j.issn.1000-8829.2012.08.027

2012-01-01

Abstract:The cross-platform OpenGL solution is summarized.The system architecture,the basic characteristics and applications of vividGL are introduced.Comparing with other solutions in the same industry,the advantages of vividGL solutions are highlighted.

What problem does this paper attempt to address?

A real-time display platform based on PC

Genyuan Zhang,Lei Zhao

DOI: https://doi.org/10.1109/NDT.2009.5272063

2009-01-01

Abstract:we implement a collaborative display platform called CMPLATFORM In order to display virtual outdoor complex environment in virtual display hardware based on multiple cheap PC, which could be extended to provides a platform to display immersive application which can be used in the areas of urban planning/architecture and education. CMPLATFORM is a PC cluster based system developed by C++ and Wxwidet. This paper outlines our display system called CMPLATFORM for interactive immersive display applications that is low-cost, easy to calibrate, scalable, and portable.
MultiPro: A Platform for PC Cluster Based Active Stereo Display System

Qingshu Yuan,Dongming Lu,Weidong Chen,Yunhe Pan

DOI: https://doi.org/10.1007/11424758_89

2005-01-01

Abstract:Active stereo display system simulates the principle of human viewing, which generates two view images, one for each eye, switched by electronic glasses. Existing stereo development libraries, e.g. CAVELib, Avocano, require fully or partially understanding, at least caring of stereo display principles. Furthermore, most of existing libraries are used to develop a full application with all stereo display functions, e.g. multi-tasking, shared memory, stereo displaying, and so on. MultiPro is a PC cluster based system developed by C++ and Qt library. It's composed of following modules of controller, renderer, MultiPro Library, communication layer and application module. Benefiting from modular design, the application developer doesn't need to know anything about stereo display principles and the platform architecture. Besides, different applications can be switched at run-time of the platform, without the inconvenient switch of application processes. Three typical applications were developed and the results were excellent.
Simulation on Robot Assembly Based on OpenGL

石剑锋,谢少荣,胡涛,陈振华

DOI: https://doi.org/10.3969/j.issn.1002-2333.2004.11.006

2004-01-01

Abstract:Simulation is very important in the scientific research and study because of kinds of factors. In the paper, we introduce an opening simulation software for robot assembly by OpenGL, Visual C++ and MSComm Control. Finally, the experiment results illustrate the effectiveness of the proposed method.
A High-Performance Cross-Platform Map Rendering Engine For Mobile Geographic Information System (Gis)

Shaojie Li,Shaohua Wang,Yong Guan,Zhiyan Xie,Kejia Huang,Ming Wen,Lixin Zhou

DOI: https://doi.org/10.3390/ijgi8100427

IF: 3.4

2019-01-01

ISPRS International Journal of Geo-Information

Abstract:With the diversification of terminal equipment and operating systems, higher requirements are placed on the rendering performance of maps. The traditional map rendering engine relies on the corresponding operating system graphics library, and there are problems such as the inability to cross the operating system, low rendering performance, and inconsistent rendering style. With the development of hardware, graphics processing unit (GPU) appears in various platforms. How to use GPU hardware to improve map rendering performance has become a critical challenge. In order to address the above problems, this study proposes a cross-platform and high-performance map rendering (Graphics Library engine, GL engine), which uses mask drawing technology and texture dictionary text rendering technology. It can be used on different hardware platforms and different operating systems based on the OpenGL graphics library. The high-performance map rendering engine maintains a consistent map rendering style on different platforms. The results of the benchmark experiments show that the performance of GL engine is 1.75 times and 1.54 times better than the general map rendering engine in the iOS system and in the Android system, respectively, and the rendering performance for vector tiles is 11.89 times and 9.52 times better than rendering in the Mapbox in the iOS system and in the Android system, respectively.
SimWall: a Practical User-Friendly Stereo Tiled Display Wall System

Xie Li-jun,Zheng Yao,Yang Ting-jun,Gao Wen-xuan,Pan Ning-he

DOI: https://doi.org/10.1631/jzus.2007.a0596

2007-01-01

Abstract:SimWall is a user-friendly, stereo tiled display wall system composed of 18 commodity projectors operated by a Linux graphics cluster. Collaborating together, these projectors work as a single logical display capable of giving a high-resolution show, large-scale, and passive stereo scene. In order to avoid tedious system setup and maintenance, software-based automatic geometry and photometric calibration are used. The software calibration is integrated to the system seamlessly by an on-card transform method and is transparent to users. To end-users, SimWall works just as a common PC, but provides super computing, rendering and displaying ability. In addition, SimWall has stereoscopic function that gives users a semi-immersive experience in polarized passive way. This paper presents system architecture, implementation, and other technical issues such as hardware constraints, projectors alignment, geometry and photometric calibration, implementation of passive stereo, and development of overall software environment.
Developing 3-D graphics system about surface accessories based on OpenGL

吴世雄,王文,李剑,陈子辰

DOI: https://doi.org/10.3969/j.issn.1001-4551.2001.05.012

2001-01-01

Abstract:Aiming at surface accessories that have a lot of data points,the article provides a method about developing 3-D graphics system based on OpenGL,which solves the difficult problems in changing a lot of 3-D data points to 3-D graphics. This method have already been used to graphics system in laser measurement.
Research and Development of OpenGL-based Construction Virtual Simulation Platform

Zhang Jianping,Yu Fangqiang,Wu Dapeng

DOI: https://doi.org/10.3969/j.issn.1674-7461.2009.02.010

2009-01-01

Abstract:To overcome the shortcomings of commercial virtual simulation software including the need of high hardware configuration,expensive price and function shortage in secondary development,an OpenGL-based construction virtual simulation platform was studied and developed based on existed graphic engine of 4D-GCPSU. Its main features include reality rendering of 3D model by processing material,texture,lighting etc. 3D dynamic simulation and animation display with double buffer technique,creating and controlling of virtual scene with human-computer interaction technology. The platform has been applied and tested in practice engineering projects and can produce high quality 3D realistics model and 3D animations. It can be adopted in the development of 4D virtual construction and dynamic management systems. Therefore,the platform is of practical application value.
A cross-platform extendable 3D Virtual Reality system based on OGRE and Python

Xie Mei,Zhen Zheng,Zhang Fan,Wu Bingrong,Li Guo

DOI: https://doi.org/10.1109/ICCCAS.2009.5250486

2009-01-01

Abstract:We design and implement a cross-platform extendable Virtual Reality system with the MVC design pattern. It aims on cross-platform usage and extendibility which makes users to write VR applications much more easily. And the system can run on multiple platforms like Linux and Windows. To achieve extendibility, we embed the system with the Python script module which makes the system easy to be extended with specific VR logics for making various VR applications efficiently, also we implemented the system by using platform-independent libraries (like OGRE, Python) to achieve cross-platform usage.
Research on Unified Object Model Supporting HLA-based Simulation and Parallel Rendering.

Zonghui Wang,Hua Xiong,Xiaohong Jiang,Jiaoying Shi

DOI: https://doi.org/10.1109/cadcg.2007.4407876

2008-01-01

Journal of Computer Research and Development

Abstract:There are two problems in the existing rendering platforms that support HLA-based simulation applications. One is the fact that the management of simulation entity objects and the management of rendering scene objects are separate, which leads to inefficiency in simulation and rendering. Another one is absence of rendering interface, especially for parallel rendering for users. In order to solve the above problems, we present a unified object model supporting HLA-based simulation and parallel rendering, which consists of heterogenous scene graph tree, action list and universal access interface. The Unified object model establishes an efficient data exchange bridge between HLA simulation and parallel rendering. Therefore massive complex scene and large quantity of simulation entities can be organized and managed in a unified form. An experimental demo is given at the end of this paper.
Research and Exploitation of NC Manufacturing 3D Simulation System Based on OpenGL

Jianzhong Fu

2003-01-01

Abstract:This paper introduces the OpenGL-based system of numerical controlling simulation of process, which is developed using Visual C + +6.0 and OpenGL technology on Windows XP, is software that simulates three-dimension process of the NC milling machines. This system is consisted of the following models: the edition, compilation of NC Program, the imitator computer and display.
Multi-projector display wall system for windows desktop applications

Zhongding Jiang,Yandong Mao,Bo Qin,Nan Jiang,Binyu Zang,Hujun Bao

2007-01-01

Journal of Computational Information Systems

Abstract:Large-format high-resolution display systems are increasingly adopted in virtual reality, digital museum, scientific visualization, and other application fields. Traditionally, wall size display system is driven by a cluster of PCs or special high end graphics supercomputer. With the rapid advance of PC graphics hardware, one inexpensive mainstream PC has the power to drive multiple high-resolution displays. This paper proposes one multi-projector display wall system driven by single PC. Besides graphics intensive applications, this system can transparently and efficiently display windows desktop applications without modifying the source code. It takes advantage of the bandwidth of PCI Express bus, and supports at least triple projectors, which is suitable for constructing immersive virtual reality center. Design geometric alignment and photometric correction methods are given to display the frame buffer content seamlessly on the planar display screen. Experimental results show that this system can achieve real time refresh rates. It does little side effect on the performance of common non-graphics windows desktop applications.
Mspr: A Retained-Mode Based Multi-Screen Parallel Rendering System

C Li,ZF Jin,XH Jiang,JY Shi

DOI: https://doi.org/10.1117/12.561129

2004-01-01

Abstract:Recent interest in large displays has led to the development of a variety of multi-screen display systems, most of which are comprised of multiple projectors situated for front or rear projection onto a screen to form a large logical display, and each projector is driven by one PC, augmented with high-performance graphics accelerator card. However, most of these systems are immediate-mode based, that is, all geometry data and control information must be sent on the run, and thus the interconnecting network bandwidth between clients and servers has become a fatal bottleneck. In this paper, we describe MSPR, a retained-mode based multi-screen parallel rendering system which offers the programmers with a OpenGL-like API. And the system could be run locally on one PF or parallelly rendered among any number of Computers. The details of data distribution, load balance, interconnecting network architecture, tile mosaic, etc. are hidden from the programmers.
Application of OpenGL in AHMS Simulation System

翁轶丛,倪苏云,陈宏民

DOI: https://doi.org/10.3321/j.issn:1000-6788.2001.11.019

2001-01-01

Systems Engineering - Theory & Practice

Abstract:Combining with the design of the simulation system of anti-helicopter mine system (AHMS), this article introduces the application of OpenGL, a 3D visualizing simulation instrument, in the AHMS simulation system.
Study on Aspen Open Solver Interfaces

CHEN Zhi-qiang,CHEN Xi,SHAO Zhi-jiang,ZHANG Zheng-jiang

DOI: https://doi.org/10.3969/j.issn.1000-3932.2007.04.008

2007-01-01

Abstract:Focuses on the development of Aspen Open Solver interfaces which enables Aspentech simulations to run other algorithms,four different algorithms,including both the gradient-based and non-gradient-based methods based on the provided codes of the interfaces in Visual C++ environment were imbeded as alternative solvers for AspenPlus.Performance is demonstrated by exeperiments in AspenPlus with discussions on algorithm efficiency.This interface can efficiently combine Aspen simulation with other algorithms.
Application of Display List of OpenGL in the Cast Simulation CAE

LIU Hong-wei,LI Ri,JU Ying-cui

DOI: https://doi.org/10.3969/j.issn.1674-6694.2006.05.003

2006-01-01

Abstract:The technology of solidification simulation of casting has been widely used in production.In order to make the application of the simulation software in production more popular,the development of better visualization is a very important job.In the software,there are several or several ten million meshes in each analysis of solidification simulation.On based of OpenGL,by using the display list and alternating refurbish to implement dynamic observation of the complex three-dimensional objects.
OpenGL-Based Visualization Theodolite Industrial Surveying System

TONG Zhi-min,TANG Wen-yan,MA Qiang,SUN He-yi

DOI: https://doi.org/10.3969/j.issn.1000-8829.2007.04.010

2007-01-01

Abstract:A new theodolite 3D industrial surveying system SpatialMagic has been built independently assisted by OpenGL.Based on the original functions of gathering,saving and analyzing,it now can visualize the discrete points gathered on line and display the fitting result off line.3D entity model library of theodolites and auxiliary tools have also been created to simulate and control the complex industrial surveying process,this makes the complex testing task more intuitionistic and much easier and more efficiently at the same time.
Research of visual programmer and intelligent simulation platform on triaxial motion control system

HE Ping,ZHANG Chun-yu,TANG Ke-di,ZHANG Hong-jian

DOI: https://doi.org/10.3969/j.issn.1672-0946.2009.06.017

2009-01-01

Abstract:Visual programmer and intelligent simulation combined with OpenGL, embedded system, fundamentals of compiling and software engineering is presented in this paper. The control command is implemented by visual component programmer, and the producing process can be simulated in the platform. The control command for triaxial motion control can be compiled to various instruction sequence according to different system topology, and has a strong portability. The platform is an innovative improvement on the design of programmer of motion control system, and is of great significance to broaden the research area and promote its application.
Design and Implementation of Virtual Campus Roaming System Based on OpenGL and 3ds Max

Zhanzhan Duan,Hui Wang,Pan Wang

DOI: https://doi.org/10.1109/itoec49072.2020.9141888

2020-01-01

Abstract:Based on the technology of virtual reality, this paper discusses the design and implementation of virtual campus roaming system based on VC++ platform and OpenGL, and conducts a further research on the basic algorithm of developing virtual campus roaming system in order to provide an important campus information platform for the construction of information campus. Shanghai University of Engineering Science (Yixian Road Campus) is taken as a case to establish a campus roaming system, and the OpenGL database and 3Ds Max platform are applied as the development tools to establish a fully immersive and good realistic effect. The uer can use the mouse and keyboard and other external devices to roam in the three-dimensional virtual campus scene so that they have an immersive experience and understand this university's environmental style in a comprehensive and three-dimensional way. The experimental results show that the campus environment using this system has strong authenticity, the average running time of editing operation is 309 ms, and the user satisfaction is high.
A Novel Multi-channel Visual Simulation System with One PC

Ding Ying,Fan Jing-tao,Zhang Chao,Zhu Ji-hong

DOI: https://doi.org/10.1109/cisp.2014.7003876

2014-01-01

Abstract:Now the advanced visual simulation system is usually equipped with the large-wide projection or multi-projection display system, and several graphic workstations to achieve the real-time rendering task for multiple channels, which can provide the large field of view for user and bring the immersive feeling with the interactive devices' supporting. This paper presented a novel multi-channel visual simulation system with on one single PC, analyzed the system architecture of multi-channel visual simulation and the process of visual generation, studied the technology bottlenecks and the key factors of visual simulation expanding from single to multi-channel, and presented a visual simulation expanding scheme based on graphics card programming. The experimental results verified that this scheme has a more flexible and scalable architecture, a close or even better performance compared to distributed simulation system based on PC cluster, and easier to expand and upgrade, the system cost will be cut down.
Achieving high and consistent rendering performance of Java AWT/Swing on multiple platforms

Yi‐Hsien Wang,I‐Chen Wu,Yi-Hsien Wang,I-Chen Wu

DOI: https://doi.org/10.1002/spe.920

2009-01-01

Abstract:Abstract Wang et al . ( Softw. Pract. Exper. 2007; 37 (7):727–745) observed a phenomenon of performance inconsistency in the graphics of Java Abstract Window Toolkit (AWT)/Swing among different Java runtime environments (JREs) on Windows XP. This phenomenon makes it difficult to predict the performance of Java game applications. Therefore, they proposed a portable AWT/Swing architecture, called CYC Window Toolkit (CWT), to provide programmers with high and consistent rendering performance for Java game development among different JREs. They implemented a DirectX version to demonstrate the feasibility of the architecture. This paper extends the above research to other environments in two aspects. First, we evaluate the rendering performance of the original Java AWT with different combinations of JREs, image application programming interfaces, system properties and operating systems (OSs), including Windows XP, Windows Vista, Fedora and Mac OS X. The evaluation results indicate that the performance inconsistency of Java AWT also exists among the four OSs, even if the same hardware configuration is used. Second, we design an OpenGL version of CWT, named CWT‐GL, to take advantage of modern 3D graphics cards, and compare the rendering performance of CWT with Java AWT/Swing. The results show that CWT‐GL achieves more consistent and higher rendering performance in JREs 1.4 to 1.6 on the four OSs. The results also hint at two approaches: (a) decouple the rendering pipelines of Java AWT/Swing from the JREs for faster upgrading and supporting old JREs and (b) use other graphics libraries, such as CWT, instead of Java AWT/Swing to develop cross‐platform Java games with higher and more consistent rendering performance. Copyright © 2009 John Wiley & Sons, Ltd.

computer science, software engineering

OpenGL Solutions for Multiple Platform

A real-time display platform based on PC

MultiPro: A Platform for PC Cluster Based Active Stereo Display System

Simulation on Robot Assembly Based on OpenGL

A High-Performance Cross-Platform Map Rendering Engine For Mobile Geographic Information System (Gis)

SimWall: a Practical User-Friendly Stereo Tiled Display Wall System

Developing 3-D graphics system about surface accessories based on OpenGL

Research and Development of OpenGL-based Construction Virtual Simulation Platform

A cross-platform extendable 3D Virtual Reality system based on OGRE and Python

Research on Unified Object Model Supporting HLA-based Simulation and Parallel Rendering.

Research and Exploitation of NC Manufacturing 3D Simulation System Based on OpenGL

Multi-projector display wall system for windows desktop applications

Mspr: A Retained-Mode Based Multi-Screen Parallel Rendering System

Application of OpenGL in AHMS Simulation System

Study on Aspen Open Solver Interfaces

Application of Display List of OpenGL in the Cast Simulation CAE

OpenGL-Based Visualization Theodolite Industrial Surveying System

Research of visual programmer and intelligent simulation platform on triaxial motion control system

Design and Implementation of Virtual Campus Roaming System Based on OpenGL and 3ds Max

A Novel Multi-channel Visual Simulation System with One PC

Achieving high and consistent rendering performance of Java AWT/Swing on multiple platforms