Properties of Nafion® NR-211 membranes for PEMFCs

Jennifer Peron,Ana Mani,Xinsheng Zhao,Dave Edwards,Makoto Adachi,Tatyana Soboleva,Zhiqing Shi,Zhong Xie,Titichai Navessin,Steven Holdcroft
DOI: https://doi.org/10.1016/j.memsci.2010.03.025
IF: 9.5
2010-01-01
Journal of Membrane Science
Abstract:Nafion® 211 is the membrane of reference for many fuel cell users, but the literature on its properties is sparse. Unlike previous embodiments of Nafion® membranes, which are obtained by melt extrusion, Nafion® 211 is prepared by dispersion casting. This paper reports a range of properties obtained by ex situ and in situ characterization methods. Water uptake and proton conductivity are studied as a function of temperature and relative humidity. The extent of dimensional changes of as-received membranes upon hydration is found to be independent of thermal treatment. At 25°C and 97% RH the maximum hydration number is ∼12. Absorption from liquid water and vapour are observed to be similar. Proton conductivity for Nafion® 211 is reported up 80°C and as a function of relative humidity. At 80°C, the conductivity increases from 0.0012 to 0.13S/cm as RH is increased from 10 to 95%. The hydraulic permeability of Nafion® 211 is 2.4×10−16m2Pa−1s−1 at 70°C and the permeance is 8.8×10−12mPa−1s−1. Oxygen solubility and the diffusion coefficient, studied using a solid state electrochemical cell, are 1.6×10−5molcm−3 and 1.04×10−6cm2s−1 at 30°C, 100% RH, and 30psi oxygen. Oxygen permeability is 1.71×10−11molcm−1s−1 under similar conditions. In situ measurement of hydrogen crossover current is 1.2mA/cm2 at 80°C and 100% RH.
What problem does this paper attempt to address?