Abstract:Electroslag welding (ESW), has great superiority in thick plate structure, composite structure and thick wall vessel etc. However, large heat input in welding process results in a wide coarse grained region and high residual stress. Furthermore, examination of weld metal toughness reveals very low Charpy V-Notch (CVN) impact toughness values. Vibratory weld conditioning (VWC) technology is the procedure that the workpieces are vibrated while welding to improve the properties of welded joint. In this paper, VWC process was carried out in ESW of the blast furnace steel 14MnNbTi. The mechanical properties of the welded joint were investigated. The test results show that VWC reduces the residual stress of the welded joint. And long time vibratory stress relief (VSR) is very important to relieve the residual stress after welding. The metallographs show that the sizes of the grains at the weld and at the heat-affected zone (HAZ) are reduced after vibration conditioning. The test results also show that the tensile strength of the joints remains constant while the side bend property improves significantly with vibratory conditioning. Especially, in the 6m/s(2) vibratory condition, the side bend performance is up to 100 percent of pass The influence of vibration on impact value is complex. The impact value increases by 70% at HAZ, whereas decreases by 30% at weld. But both are in qualified scale. The impact values in two vibratory acceleration conditions (3 m/s(2) and 6 m/s(2)) are compared and the changing mechanism is discussed in the paper. The internal friction test indicates that the Snoek-Ke-Koster (SKK) peak of the weld metal has good correlation with the impact value of the weld.

Application of vibratory welding technology in project

Research On High-Frequency Vibratory Stress Relief For Small Assembly

Application of Vibratory Welding Technology to Large-Scale Welding Components

Vibratory Stress Relief of Welded Structure in China

The Boom of the Welding Residual Stress Aging Treatment

Reduce the Residual Stress of Welded Structures by Post-Weld Vibration

Influence Of Vibration On Mechanical Properties Of Electroslag Welded Joint

Research on Welding Residual Stress Measurement Using Electromagnetic Acoustic Transducer

The Application of Vibratory Stress Relief to Energy Engineering

Effects of Vibratory Weld Conditioning on Residual Stresses and Transverse Contraction Distortions in Multipass Welding

Experimental study on electro-slag weld of blast furnace steel using vibratory conditioning technology

Rapid and Nondestructive Measurement System for Welding Residual Stress by Ultrasonic Method

PRINCIPLE AND OPTIMUM DESIGN OF ELECTROMAGNETIC VIBRATING HEAD USED FOR VIBRATION WELDING

Numerical Application Research on the Welding Residual Stress of a Super-tall Giant Transfer Truss

Vibratory Stress Relief in Manufacturing the Rails of a Maglev System

Research Progress on Welding Residual Stress and Deformation in Large or Complex Steel Structure

Temperature Distribution, Deformation and Residual Stresses of Thick Plate Butt Multipass Welding

A Study on the Microstructure and Fatigue Properties of Welding Joints in Vibration‐Assisted Laser Welding Process

Measurement of Welding Residual Stress by Ultrasonic Technology

Study on the Improvement of Electro-slag Weld Joint Properties Using Vibratory Conditioning Technology

Nondestructive Measurement System for Welding Residual Stress by Ultrasonic Method