On Ricci Flat 3-Fold

Roan Shishyr,Yau Shingtung

DOI: https://doi.org/10.1007/bf02560039

1987-01-01

Acta Mathematica Sinica English Series

Abstract:In this paper we study a sub-class of compact Ricci flat manifolds from certain standard constructions.

What problem does this paper attempt to address?

Levi-Civita Ricci-flat Metrics on Compact Complex Manifolds

Jie He,Kefeng Liu,Xiaokui Yang

DOI: https://doi.org/10.1007/s12220-019-00156-9

2020-01-01

Abstract:In this paper, we study the geometry of compact complex manifolds with Levi-Civita Ricci-flat metrics and prove that compact complex surfaces admitting Levi-Civita Ricci-flat metrics are Kähler Calabi-Yau surfaces or Hopf surfaces.
Singularity of Connection Ricci Flow for Three-Manifolds

Weimin Sheng,Haobin Yu

DOI: https://doi.org/10.1063/1.5001337

IF: 1.469

2017-01-01

Journal of Mathematical Physics

Abstract:We study the long-time behavior of the solution to the connection Ricci flow on closed three-manifolds. The connection Ricci flow is a generalization of the Ricci flow to connection with torsion. We compare the evolving metrics under the connection Ricci flow and Ricci flow for some special cases. We obtain the blow-up rate of the Ricci tensor under the connection Ricci flow. Based on the result, we give the classification of the maximal solutions to the flow.
On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Hong-Wei Xu,Li Lei,Juan-Ru Gu

DOI: https://doi.org/10.4310/pamq.2016.v12.n2.a6

2016-01-01

Pure and Applied Mathematics Quarterly

Abstract:In this paper, we investigate Yau's rigidity problem for compact submanifolds with parallel mean curvature in pinched Riemannian manifolds. Firstly, we prove that if M-n is an oriented closed minimal submanifold in an (n + p)-dimensional complete simply connected Riemannian manifold Nn(+p), then there exists a constant delta(0)(n, p) is an element of (0, 1) such that if the sectional curvature of N satisfies (K) over bar (N) is an element of[delta(0)(n, p), 1], and if M has a lower bound for the sectional curvature and an upper bound for the normalized scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally geodesic sphere, one of the Clifford minimal hypersurfaces S-k(root k/n) x S-n (k)(root n-k/n) in Sn+1 for k = 1,..., n-1, or the Veronese submanifold in Sn+d, where d = 1/2n(n + 1) - 1. We then generalize the above theorem to the case where M ia a compact submanifold with parallel mean curvature in a pinched Riemannian manifold.
Curvature Pinching for Three-Dimensional Minimal Submanifolds in a Sphere

YB SHEN

DOI: https://doi.org/10.2307/2159229

IF: 0.9709

1992-01-01

Proceedings of the American Mathematical Society

Abstract:In this paper, some pinching theorems for the Ricci curvature and the scalar curvature of three-dimensional compact minimal submanifolds in a sphere are given.
Ricci Flow on 3-dimensional Lie groups and 4-dimensional Ricci-flat manifolds

Kensuke Onda

DOI: https://doi.org/10.48550/arXiv.0906.1035

2010-03-25

Abstract:We study relation of the Ricci Flow on 3-dimensional Lie groups and 4-dimensional Ricci-flat manifolds. In particular, we construct Ricci-flat cohomogeneity one metrics with respect to 3-dimensional Lie groups.

Differential Geometry
Compact three dimensional Kahler manifolds with zero Ricci curvature

Shing-Tung Yau

1985-01-01

Abstract:[en] This paper reviews the construction of compact manifolds with zero Ricci curvature. The author constructs three examples of such manifolds with Euler number equal to-6. The problem of constructing a compact manifold with zero Ricci curvature which is not flat is addressed
Graph bundles and Ricci-flatness

Wenbo Li,Shiping Liu

DOI: https://doi.org/10.1112/blms.12946

2023-05-13

Abstract:We develop a systematical way of constructing S-Ricci flat graphs which are not Abelian Cayley via graph bundle with explicit examples. For this purpose, we prove that, with some natural constrains, a non-trivial graph bundle can not be isomorphic (as graphs) to the product of the base graph and fiber graph. It stands in clear contrast to the continuous case.

Differential Geometry,Combinatorics
On the rigidity of Ricci shrinkers

Yu Li,Wenjia Zhang

2023-05-10

Abstract:In this paper, we establish the rigidity of the generalized cylinder $N^n \times \mathbb R^{m-n}$, or a quotient thereof, in the space of Ricci shrinkers equipped with the pointed-Gromov-Hausdorff topology. Here, $N$ is a stable Einstein manifold that has an obstruction of order $3$. The proof is based on a quantitative characterization of the rigidity of compact Ricci shrinkers, a rigidity inequality of mixed orders on generalized cylinders, and the method of contraction and extension. As an application, we prove the uniqueness of the tangent flow for general compact Ricci flows under the assumption that one tangent flow is a generalized cylinder.

Differential Geometry
Ricci Flat Metrics, Flat Connections and $G_{2}$-Manifolds

Bobby Samir Acharya,Daniel Andrew Baldwin

2023-12-20

Abstract:Inspired by considerations in $M$-theory, we prove the equivalence between the moduli spaces of (suitably complexified) torsion free $G_{2}$-structures on 7-manifolds which are families of hyperKähler ALE 4-manifolds fibered over compact flat 3-manifolds $T^{3}/K$ and certain moduli spaces of flat $G^{\mathbb{C}}_{ADE}$ connections on $T^{3}/K$.

High Energy Physics - Theory,Differential Geometry
On Conformally Flat Manifolds with Semi-parallel Ricci Tensor and Applications to the Study of Affine Hyperspheres

Weilin Duan,Zejun Hu,Cheng Xing

DOI: https://doi.org/10.1007/s00025-024-02232-1

2024-07-20

Results in Mathematics

Abstract:This paper is concerned with the study of n -dimensional conformally flat Riemannian manifolds for and its applications in affine differential geometry. First, improving the work of Sekigawa–Takagi (Tohoku Math J 23:1–11, 1971), we have a complete classification for conformally flat Riemannian manifolds with semi-parallel Ricci tensor. Then, as an application, we establish a complete classification of locally strongly convex affine hyperspheres in the -dimensional affine space with conformally flat affine metric and semi-parallel Ricci tensor, which generalizes the previous works of Cheng–Hu–Moruz–Vrancken (Sci China Math 63:2055–2078, 2020) and Hu–Xing (J Math Anal Appl 528:127596, 2023) on affine hyperspheres with parallel Ricci tensor.

mathematics, applied
Nilpotent Structures and Collapsing Ricci-flat Metrics on the K3 Surface

Hans-Joachim Hein,Song Sun,Jeff Viaclovsky,Ruobing Zhang

DOI: https://doi.org/10.1090/jams/978

2021-01-01

Journal of the American Mathematical Society

Abstract:We exhibit families of Ricci-flat Kahler metrics on K3 surfaces which collapse to an interval, with Tian-Yau and Taub-NUT metrics occurring as bubbles. There is a corresponding continuous surjective map from the K3 surface to the interval, with regular fibers diffeomorphic to either 3-tori or Heisenberg nilmanifolds.
On locally conformally flat manifolds with positive pinched Ricci curvature

Liang Cheng

2023-05-29

Abstract:By using the Yamabe flow, we prove that if $(M^n,g)$, $n\geq3$, is an $n$-dimensional locally conformally flat complete Riemannian manifold $Rc\geq \epsilon Rg>0$, where $\epsilon>0$ is a uniformly constant, then $M^n$ must be compact. Our result shows that Hamilton's pinching conjecture also holds for higher dimensional case if we assume additionally the metric is locally conformally flat.

Differential Geometry
Ricci-flat Graphs with Maximum Degree at Most 4

Shuliang Bai,Linyuan Lu,Shing-Tung Yau

DOI: https://doi.org/10.4310/ajm.2021.v25.n6.a1

2021-01-01

Asian Journal of Mathematics

Abstract:A graph is called Ricci-flat if its Ricci curvatures vanish on all edges, here the definition of Ricci curvature on graphs was given by Lin-Lu-Yau. The authors in arXiv:1301.0102 and arXiv:1802.02982 obtained a complete characterization for all Ricci-flat graphs with girth at least five. In this paper, we completely determined all Ricci-flat graphs with maximum degree at most 4.
On Projectively Flat Hermitian Manifolds

Jun Li,Shing-Tung Yau,Fangyang Zheng

DOI: https://doi.org/10.4310/cag.1994.v2.n1.a6

1994-01-01

Communications in Analysis and Geometry

Abstract:Let (M n ,g) be a n-dimensional compact hermitian manifold, with n > 2.(M, g) will be called projectively flat, if its curvature matrix is of the form 0 = a/ n , where a is a (1, l)-form.Note that any metric conformal to g would also be projectively flat.In §1, we shall classify such manifolds, and in §2, we will give an application which may be considered as a generalization to higher dimensions of the Bogomolov's Theorem on VIIQ surfaces.First of all, let us correct an error in our previous paper [L-Y-Z].We found this error after the paper was in print.On page 220, the vanishing of c^ and C2 does not imply that the Hermitian-Einstein metric h is flat, but only projectively flat, i.e., © = 0/2-So the argument there is incomplete.However, this gap can be easily fixed by applying the results of P. Gauduchon ([G]) and D. Fried ([F]).Start from the projectively flat compact hermitian surface (5, /i).By [G], h is locally conformally Kahler.That is, there exists a covering {[/QJ, and f a € C 00 (?7Q !, i?), such that each e^ag is a Kahler metric in U a .Note e^g is also projectively flat, hence flat, and in U a fl C/^, f a -fp is a constant.Therefore, S is a complex similarity manifold.By Theorem 2 of [F], it is either covered by a complex 2-torus or a Hopf surface.This completes the proof of Bogomolov's theorem. 1 PROJECTIVELY FLAT MANIFOLDSNow let us consider the projectively flat manifolds in general dimensions.First let us fix some notations.On a hermitian manifold (M n ,g), let e =
Manifolds with A Lower Ricci Curvature Bound

Guofang Wei

DOI: https://doi.org/10.48550/arXiv.math/0612107

2006-12-05

Abstract:This paper is a survey on the structure of manifolds with a lower Ricci curvature bound.

Differential Geometry
Ricci Curvature of Graphs

Yong Lin,Linyuan Lu,Shing-Tung Yau

DOI: https://doi.org/10.2748/tmj/1325886283

2011-01-01

Abstract:We modify the definition of Ricci curvature of Ollivier of Markov chains on graphs to study the properties of the Ricci curvature of general graphs, Cartesian product of graphs, random graphs. and some special class of graphs.
Rigidity Results for Compact Submanifolds with Pinched Ricci Curvature in Euclidean and Spherical Space Forms

Jianquan Ge,Ya Tao,Yi Zhou

2024-11-21

Abstract:For compact submanifolds in Euclidean and Spherical space forms with Ricci curvature bounded below by a function $\alpha(n,k,H,c)$ of mean curvature, we prove that the submanifold is either isometric to the Einstein Clifford torus, or a topological sphere for the maximal bound $\alpha(n,[\frac{n}{2}],H,c)$, or has up to $k$-th homology groups vanishing. This gives an almost complete (except for the differentiable sphere theorem) characterization of compact submanifolds with pinched Ricci curvature, generalizing celebrated rigidity results obtained by Ejiri, Xu-Tian, Xu-Gu, Xu-Leng-Gu, Vlachos, Dajczer-Vlachos.

Differential Geometry
Ricci Flatness of Asymptotically Locally Euclidean Metrics

L Ni,YG Shi,LF Tam

DOI: https://doi.org/10.1090/s0002-9947-02-03242-7

IF: 1.3529

2002-01-01

Transactions of the American Mathematical Society

Abstract:In this article we study the metric property and the function theory of asymptotically locally Euclidean (ALE) Kähler manifolds. In particular, we prove the Ricci flatness under the assumption that the Ricci curvature of such manifolds is either nonnegative or nonpositive. The result provides a generalization of previous gap type theorems established by Greene and Wu, Mok, Siu and Yau, etc. It can also be thought of as a general positive mass type result. The method also proves the Liouville properties of plurisubharmonic functions on such manifolds. We also give a characterization of Ricci flatness of an ALE Kähler manifold with nonnegative Ricci curvature in terms of the structure of its cone at infinity.
Ricci flow on open 3-manifolds and positive scalar curvature

Laurent Bessières,Gérard Besson,Sylvain Maillot

DOI: https://doi.org/10.2140/gt.2011.15.927

2010-01-10

Abstract:We show that an orientable 3-dimensional manifold M admits a complete riemannian metric of bounded geometry and uniformly pos- itive scalar curvature if and only if there exists a finite collection F of spherical space-forms such that M is a (possibly infinite) connected sum where each summand is diffeomorphic to S2xS1 or to some mem- ber of F. This result generalises G. Perelman's classification theorem for compact 3-manifolds of positive scalar curvature. The main tool is a variant of Perelman's surgery construction for Ricci flow.

Differential Geometry
On Bismut Flat Manifolds

Qingsong Wang,Bo Yang,Fangyang Zheng

DOI: https://doi.org/10.1090/tran/8083

IF: 1.3529

2020-01-01

Transactions of the American Mathematical Society

Abstract:In this paper, we give a classification of all compact Hermitian manifolds with flat Bismut connection. We show that the torsion tensor of such a manifold must be parallel, thus the universal cover of such a manifold is a Lie group equipped with a bi-invariant metric and a compatible left invariant complex structure. In particular, isosceles Hopf surfaces are the only Bismut flat compact non-Kähler surfaces, while central Calabi-Eckmann threefolds are the only simply-connected compact Bismut flat threefolds.

On Ricci Flat 3-Fold

Levi-Civita Ricci-flat Metrics on Compact Complex Manifolds

Singularity of Connection Ricci Flow for Three-Manifolds

On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Curvature Pinching for Three-Dimensional Minimal Submanifolds in a Sphere

Ricci Flow on 3-dimensional Lie groups and 4-dimensional Ricci-flat manifolds

Compact three dimensional Kahler manifolds with zero Ricci curvature

Graph bundles and Ricci-flatness

On the rigidity of Ricci shrinkers

Ricci Flat Metrics, Flat Connections and $G_{2}$-Manifolds

On Conformally Flat Manifolds with Semi-parallel Ricci Tensor and Applications to the Study of Affine Hyperspheres

Nilpotent Structures and Collapsing Ricci-flat Metrics on the K3 Surface

On locally conformally flat manifolds with positive pinched Ricci curvature

Ricci-flat Graphs with Maximum Degree at Most 4

On Projectively Flat Hermitian Manifolds

Manifolds with A Lower Ricci Curvature Bound

Ricci Curvature of Graphs

Rigidity Results for Compact Submanifolds with Pinched Ricci Curvature in Euclidean and Spherical Space Forms

Ricci Flatness of Asymptotically Locally Euclidean Metrics

Ricci flow on open 3-manifolds and positive scalar curvature

On Bismut Flat Manifolds