Abstract:A new strategy for fabricating a sensitivity-enhanced glucose biosensor was presented, based on multi-walled carbon nanotubes (CNT), Pt nanoparticles (PtNP) and sol–gel of chitosan (CS)/silica organic–inorganic hybrid composite. PtNP-CS solution was synthesized through the reduction of PtCl62− by NaBH4 at room temperature. Benefited from the amino groups of CS, a stable PtNP gel was obtained, and a CNT–PtNP–CS solution was prepared by dispersing CNT functionalized with carboxylic groups in PtNP–CS solution. The CS/silica hybrid sol–gel was produced by mixing methyltrimethoxysilane (MTOS) with the CNT–PtNP–CS solution. Then, with the immobilization of glucose oxidase (GOD) into the sol–gel, the glucose biosensor of GOD–CNT–PtNP–CS–MTOS–GCE was fabricated. The properties of resulting glucose biosensor were measured by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). In phosphate buffer solutions (PBS, pH 6.8), nearly interference free determination of glucose was realized at low applied potential of 0.1V, with a wide linear range of 1.2×10−6 to 6.0×10−3M, low detection limit of 3.0×10−7M, high sensitivity of 2.08μAmM−1, and a fast response time (within 5s). The results showed that the biosensor provided the high synergistic electrocatalytic action, and exhibited good reproducibility, long-term stability. Subsequently, the novel biosensor was applied for the determination of glucose in human serum sample, and good recovery was obtained (in the range of 95–104%).

Glucose biosensor based on electrodeposited platinum nanoparticles and three-dimensional porous chitosan membranes

Glucose Biosensor Based on a Platinum Electrode Modified with Rhodium Nanoparticles and with Glucose Oxidase Immobilized on Gold Nanoparticles

Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Carbon Nanotubes and Immobilizing Enzyme with Chitosan-Sio2 Sol-Gel

Nonenzymatic glucose sensor based on a glassy carbon electrode modified with chains of platinum hollow nanoparticles and porous gold nanoparticles in a chitosan membrane

Glucose Biosensor Based on Chitosan-Nano Gold/Nano-Prussian Blue/L-Cysteine Modified Gold Electrode

A Glucose Biosensor Based on Chitosan–prussian Blue–multiwall Carbon Nanotubes–hollow PtCo Nanochains Formed by One-Step Electrodeposition

A Glucose Biosensor Based on Chitosan–glucose Oxidase–gold Nanoparticles Biocomposite Formed by One-Step Electrodeposition

Glucose biosensor based on immobilization of glucose oxidase in platinum nanoparticles/graphene/chitosan nanocomposite film.

Construction of an amperometric glucose biosensor based on the immobilization of glucose oxidase onto electrodeposited Pt nanoparticles-chitosan composite film

A Novel Glucose Biosensor Based On Immobilization Of Glucose Oxidase In Chitosan On A Glassy Carbon Electrode Modified With Gold-Platinum Alloy Nanoparticles/Multiwall Carbon Nanotubes

Glucose biosensors based on platinum nanoparticles-deposited carbon nanotubes in sol-gel chitosan/silica hybrid.

Preparation of Porous Chitosan/carbon Nanotubes Film Modified Electrode for Biosensor Application

Amperometric Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Covalently Immobilized Carbon Nanotube Electrode.

A Glucose Biosensor Based on Direct Electrochemistry of Glucose Oxidase Immobilized Onto Platinum Nanoparticles Modified Graphene Electrode

Glucose Biosensor Based on the Highly Efficient Immobilization of Glucose Oxidase on Prussian Blue-Gold Nanocomposite Films

Study of Electrochemical Biosensor for Determination of Glucose Based on Prussian Blue/Gold Nanoparticles-Chitosan Nanocomposite Film Sensing Interface

Novel Nanocomposite of Chitosan-protected Platinum Nanoparticles Immobilized on Nickel Hydroxide: Facile Synthesis and Application as Glucose Electrochemical Sensor

Electrochemical Biosensing Platform with Carbon Nanotubes Incorporated into Platinum Nanoparticle-loaded Chitosan/Sol-gel Derived Composite Matrix

Palladium nanoparticle/chitosan-grafted graphene nanocomposites for construction of a glucose biosensor.

Amperometric Glucose Biosensor Based on Chitosan with Improved Selectivity and Stability

Glucose Biosensor Based on Titanium Dioxide-Multiwall Carbon Nanotubes-Chitosan Composite and Functionalized Gold Nanoparticles