Abstract:A glucose biosensor was developed via direct immobilization of glucose oxidase (GOD) by self-assembled cysteamine monolayer on Au electrode surface followed by coating chitosan on the surface of electrode. In this work, chitosan film was coated on the surface of GOD as a protection film to ensure the stability and biocompatibility of the constructed glucose biosensor. The different application ranges of sensors were fabricated by immobilizing varied layers of GOD. The modified surface film was characterized by a scanning electron microscope (SEM) and the fabrication process of the biosensor was confirmed through electrochemical impedance spectroscopy (EIS) of ferrocyanide. The performance of cyclic voltammetry (CV) in the absence and presence of 25 mM glucose and ferrocenemethanol showed a diffusion-controlled electrode process and reflected the different maximum currents between the different GOD layers. With the developed glucose biosensor, the detection limits of the two linear responses are 49.96 μM and 316.8 μM with the sensitivities of 8.91 μA mM(-1)cm(-2) and 2.93 μA mM(-1)cm(-2), respectively. In addition, good stability (up to 30 days) of the developed biosensor was observed. The advantages of this new method for sensors construction was convenient and different width ranges of detection can be obtained by modified varied layers of GOD. The sensor with two layers of enzyme displayed two current linear responses of glucose. The present work provided a simplicity and novelty method for producing biosensors, which may help design enzyme reactors and biosensors in the future.

Preparation of Porous Chitosan/carbon Nanotubes Film Modified Electrode for Biosensor Application

Electrochemically Deposited Nanocomposite Film of CS-Fc/Au NPs/GOx for Glucose Biosensor Application.

Preparation of glucose biosensor based on the nanocomposite film of titanium dioxide/carbon nanotubes/chitosan

A Nanocomposite Chitosan Based on Ferrocene‐Modified Silica Nanoparticles and Carbon Nanotubes for Biosensor Application

Construction of an amperometric glucose biosensor based on the immobilization of glucose oxidase onto electrodeposited Pt nanoparticles-chitosan composite film

Layer-by-layer assemblies of chitosan/multi-wall carbon nanotubes and glucose oxidase for amperometric glucose biosensor applications

Carbon Nanotube/chitosan/gold Nanoparticles-Based Glucose Biosensor Prepared by a Layer-by-layer Technique

One-pot Electrodeposition of 3-Aminopropyltriethoxysilane–chitosan Hybrid Gel Film to Immobilize Glucose Oxidase for Biosensing

Direct Electrochemistry of Glucose Oxidase Immobilized on Chitosan-Gold Nanoparticle Composite Film on Glassy Carbon Electrodes and Its Biosensing Application

Fabrication of glucose biosenensor based on one-step electrodeposited GOD/TISBA-15/CHIT composite

Use of Chitosan for Developing Layer-By-Layer Multilayer Thin Films Containing Glucose Oxidase for Biosensor Applications

Chitosan Coated on the Layers' Glucose Oxidase Immobilized on Cysteamine/au Electrode for Use As Glucose Biosensor.

Amperometric Glucose Biosensor Based on NiFe2O4 Nanoparticles and Chitosan

Nanocomposite film based on graphene oxide for high performance flexible glucose biosensor

A Novel Glucose Biosensor Based On Immobilization Of Glucose Oxidase In Chitosan On A Glassy Carbon Electrode Modified With Gold-Platinum Alloy Nanoparticles/Multiwall Carbon Nanotubes

Amperometric glucose biosensor based on a surface treated nanoporous ZrO 2/Chitosan composite film as immobilization matrix

One-step Synthesis of Silver Nanoparticles/carbon Nanotubes/chitosan Film and Its Application in Glucose Biosensor

A Glucose Biosensor Based on Chitosan–prussian Blue–multiwall Carbon Nanotubes–hollow PtCo Nanochains Formed by One-Step Electrodeposition

One-pot Electrodeposition of a Composite Film of Glucose Oxidase, Imidazolium Alkoxysilane and Chitosan on a Reduced Graphene Oxide–pt Nanoparticle/au Electrode for Biosensing

Electrochemically deposited nanocomposite of chitosan and carbon nanotubes for biosensor application.

Simple construction of an enzymatic glucose biosensor based on a nanocomposite film prepared in one step from iron oxide, gold nanoparticles, and chitosan