Abstract:This paper investigates the clutch control problem for automotive transmission systems. This paper focuses on the pressure tracking control for a wet clutch, which has a much shorter stroke and asks for a more precise position and pressure regulation. The system dynamics are highly nonlinear, and the developed model includes unmodeled dynamics and parameter uncertainties. All these factors will influence the closed-loop system performance if not considered carefully during the control design, which makes the control synthesis for clutch systems challenging. Compared with the existing sliding-mode control (SMC) method, an improved method based on nonlinear sliding mode is presented in this paper to further improve the convergence rate and tracking precision of the closed-loop clutch system. This controller ensures that the pressure tracking error not only reaches the sliding manifold in finite time but converges to the equilibrium point in finite time as well. Moreover, considering the chattering phenomenon caused by high switching gains, a composite terminal SMC (TSMC) method based on uncertainty observer is proposed to reduce chattering. Using an extended state observer (ESO) technique, an uncertainty observer is designed for estimating the model uncertainties of pressure dynamics, pressure-reducing-valve flow dynamics, and estimation error of piston displacement. Then, a feedforward compensation term is combined with the terminal-sliding-mode feedback control. Thus, the composite terminal-sliding-mode controller may take smaller control gains for the whole pressure tracking procedure without sacrificing uncertainty compensation performance. Experimental results based on an xPC Target platform of the clutch system are provided to show the superiority of the proposed methods.

Design and Modeling of an Electric Wedge Clutch

Analysis and Modeling for Electro-pneumatic AMT System

Analysis of Clutch Engagement Judder and Its Influence Factors

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Simulation Research on the Drag Torque of Disengaged Wet Clutches

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Compound Sliding Mode Motion Trajectory Tracking Control of an Electro-Pneumatic Clutch Actuator While Maximizing Its Stiffness

Parametric Analysis of the Drag Torque Model of Wet Multi-Plate Friction Clutch with Groove Consideration

Simulation and Experiment on Dynamic Engagement Characteristics of Wet Clutch

Simultaneous Control of Motion and Maximized Stiffness for an Electro-Pneumatic Clutch Actuator Based on Pressure Observers

Simulation Of Wet-Clutch Short-Time Load End Speed Control System On Amesim

Modeling and control of ball-ramp electromechanical clutch actuator for in-wheel AMT of electric vehicles

Modeling and Analysis of Gear-Shifting Process of Motor-Transmission Coupled Drive System

Modeling and Simulation of Gear Shifting in Clutchless Coupled Motor-Transmission System

Hierarchical Control of Starting Process for Wet Dual Clutch Transmission Based on Direct-Drive Pump-Controlled Hydraulic Actuator

The Design of Low Cost Valve-and-pump Compounded Pressure Control System for the Hydro Viscous Clutch

Study on the control law of automated mechanical transmission clutch

Development and evaluation of a magnetorheological fluid-based clutch with hybrid excitation

Design and Finite Element Analysis of an Automotive Clutch Assembly

Design and Implementation of Clutch Control for Automotive Transmissions Using Terminal-Sliding-Mode Control and Uncertainty Observer

Dynamics modeling and analysis of the multistage planetary gear set-bearing-rotor-clutch coupling system considering the tooth impacts of clutches