Abstract:A modular, programmable, and high performance Power Gating strategy, called cluster based tunable sleep transistor cell Power Gating, has been introduced in the present paper with a few modifications. Furthermore, a detailed comparison of its performance with some of the other conventional Power Gating schemes; such as Cluster Based Sleep Transistor Design (CBSTD), Distributed Sleep Transistor Network (DSTN) etc.; has also been presented here. Considering the constraints of power consumption, performance, and the area overhead, while doing the actual implementation of any Power Gating scheme, it becomes important to deal with the various design issues like the proper sizing of the sleep transistors (STs), controlling the voltage drop (IR drop) across the STs, and obviously maintaining a desired performance with lower amount of delay degradation. With this notion, we tried to find out an efficient Power Gating strategy which can reduce the overall power consumption of any CMOS circuit by virtue of reducing the standby mode leakage current. Taking the different performance parameters into account, for an example circuit, which is actually the conventional 4x4 multiplier design, we found that the modified tunable sleep transistor cell Power Gating gives very much promising results. The reported architecture of the 4x4 multiplier with the tunable sleep transistor cell Power Gating, is designed using 45 nm technology and it consumes 1.3638x10-5 Watt of Average Power while being operated with the nominal case of the bit configuration word, that is, 1000. ...........

Dstn Sleep Transistor Sizing with A New Approach to Estimate the Maximum Instantaneous Current

A Novel Performance Driven Power Gating Based on Distributed Sleep Transistor Network

Sleep Transistor Sizing for Multi-Threshold-voltage Network Using Lagrange SOR Iteration

Design and Validate the Chip's Power-Network in DSM

Simultaneous Fine-grain Sleep Transistor Placement and Sizing for Leakage Optimization

Two-phase Fine-grain Sleep Transistor Insertion Technique in Leakage Critical Circuits

Implementation of the Cluster Based Tunable Sleep Transistor Cell Power Gating Technique for a 4x4 Multiplier Circuit

Fine-Grain Sleep Transistor Insertion for Leakage Reduction

Fine-grain Sleep Transistor Placement Considering Leakage Feedback Gate

DSTN (Distributed Sleep Transistor Network) for Low Power Programmable Logic array Design

Impacts of the MTCMOS technology on power supply network: a full-chip perspective

Design Methodology for Multipliers with Active Leakage and Dynamic Power Reduction

A Low Power Localized 2T1R STT-MRAM Array with Pipelined Quad-Phase Saving Scheme for Zero Sleep Power Systems.

Analysis of Random Sleep Scheme for Wireless Sensor Networks

Genetic algorithm based fine-grain sleep transistor insertion technique for leakage optimization

Gate Oxide and Implantation Process Co-Optimization for Low-Power MCU Applications

A 0.7-V Clock-gating Cell with Power Gating Technology and 1.56-pA Sleep Power

An efficient algorithm for estimating gate-level power consumption in large-scale integrated circuits

A Leakage Power Estimation Method for Standard Cell Based Design

A Novel Approach to Fast Simulate Maximum Power Dissipation of CMOS Combinational Circuits

Ground Bouncing Noise Reduction Technique Considering Wake-Up Delay in MTCMOS Circuits