Abstract:Due to its dominance in the whole chip area, power and delay, the FPGA interconnect circuits are traditionally designed by full custom design method. We present an automated transistor-level sizing optimization methodology for GRM FPGA interconnect circuits. In order to get accurate and effective predicated area, the commonly used diffusion sharing, transistor folding and inputs sharing are considered. To get the accurate and effective delay value, we avoid the inaccuracy of using linear device model, and use two schemes to build wire model: the wire within a circuit and the wire between interconnect circuits. To decrease simulation time, we propose multi-thread acceleration method and the Minimum-Final-Delay (MFD) algorithm which optimizes interconnect circuit as a whole, not separated part. For switch box optimization, MFD algorithm requires 38% less number of simulations than COFFE's algorithm. We use 65nm CMOS process technology for evaluation. For different optimization strategy, we emphasize either representative critical path delay or overall layout area. Compare to full-custom design method, the global cost can be decrease by 3% ~ 17%. For different transistor sizing combinations, 10/50 threads can be ~ 9X/15X faster than single-thread. Compared with the manual design method, our optimization methodology explores larger design space, and it decreases the circuit design optimization time from months to hours.

Fine-grain Sleep Transistor Placement Considering Leakage Feedback Gate

Two-phase Fine-grain Sleep Transistor Insertion Technique in Leakage Critical Circuits

Fine-Grain Sleep Transistor Insertion for Leakage Reduction

Genetic algorithm based fine-grain sleep transistor insertion technique for leakage optimization

Simultaneous Fine-grain Sleep Transistor Placement and Sizing for Leakage Optimization

Variation-aware gate sizing and clustering for post-silicon optimized circuits.

Sleep Transistor Sizing for Multi-Threshold-voltage Network Using Lagrange SOR Iteration

A Novel Performance Driven Power Gating Based on Distributed Sleep Transistor Network

The Sleep Transistor Sizing in DSTN Power Gating Circuits

Gate replacing method for easing aging of integrated circuit and reducing leakage power consumption

Design Methodology for Multipliers with Active Leakage and Dynamic Power Reduction

A Novel High-Performance Planar InAs/GaSb Face-Tunneling FET With Implanted Drain for Leakage Current Reduction

The Application of Gate-Drain Underlap Architecture in TFET-based Inverters

Employing The Mixed Fbb/Rbb In The Design Of Finfet Logic Gates

Design of Low-Power High-Performance FinFET Standard Cells

Transistor-Level Optimization Methodology for GRM FPGA Interconnect Circuits.

Gate Replacement Techniques For Simultaneous Leakage And Aging Optimization

Gate Oxide and Implantation Process Co-Optimization for Low-Power MCU Applications

A 32-Kb High-Speed 8t Sram With Fine-Grained Bitline Stacking For Leakage Reduction In 7nm Technology

Low Power High Performance FinFET Standard Cells Based on Mixed Back Biasing Technology.

Investigation of Dynamic Leakage-Suppression Logic Techniques Crossing Different Technology Nodes from 180 Nm Bulk CMOS to 7 Nm FinFET Plus Process