Abstract:Oysters abound on the west coast of Taiwan and waste oyster shell production exceeds 0.12 million tons per year. The wide availability and natural-biological origin of oyster shells, containing several trace elements that will remain in the crystalline structure of synthesized HA making its composition alike human bone, will benefit the overall physiological functioning after implantation. In this study, solid-state reactions between oyster shell powders (CaCO3) and dicalcium phosphate dihydrate (DCPD) were performed through ball milling and subsequently calcining at various temperatures (900, 1000, 1100, and 1200 °C) and durations (1, 3, 5, and 10 h). The XRD results showed that we have successfully synthesized high phase-purity HA from DCPD and oyster shell powders through 1 h of milling and then calcined at 1000 °C for 10 h or at 1200 °C for 1 h. The crystallite size of as-prepared HA was around 45.3 nm, while the particle sizes were 2.23 and 2.59 μm, respectively. According to the FTIR analysis of as-prepared HA powders calcined at 1000 °C for 10 h or at 1200 °C for 1 h, the carbonate ion peaks observed for the specimen closely matched those of A- and B-type carbonates. It is worth noting that the final products composed of single-phase HA or biphasic calcium phosphate (HA+β-TCP) can easily be prepared by using different calcination temperatures and times, although we intended to produce pure HA from oyster shell powders.

Phase purity of sol–gel-derived hydroxyapatite ceramic

Hydrothermal synthesis of nano-hydroxyapatite crystals

Formation Mechanisms of Sol-Gel-Derived Hydroxyapatite Using Different Thermal Processings

Gel-to-Ceramic Conversion during Hydroxyapatite Synthesis

Sol-gel Preparation of Fluoridated Hydroxyapatite in Ca(NO3)2-PO(OH)3−x(OEt)x-HPF6 System

Optimization of process parameters for preparation of hydroxyapatite by the sol–gel method

Preparation and thermal stability analysis of hydroxyapatite derived from the precipitation process and microwave irradiation method

Influence of phosphor precursors on the morphology and purity of sol–gel-derived hydroxyapatite nanoparticles

Synthesis and Characterization of Hydroxyapatite Using Ammonium Hydroxide and Ethylenediaminetetraacetic Acid

Synthesis of hydroxyapatite/fluoroapatite solid solution by a sol–gel method

Hydroxyapatite synthesized by a simplified hydrothermal method

Synthesis of Pure Hydroxyapatite and the Effect of Synthesis Conditions on its Yield, Crystallinity, Morphology and Mean Particle Size

FTIR, XRD, SEM and solid state NMR investigations of carbonate-containing hydroxyapatite nano-particles synthesized by hydroxide-gel technique

The effect of citric acid addition on the formation of sol–gel derived hydroxyapatite

Effects of calcination on synthesis of hydroxyapatite derived from oyster shell powders

Preparation of hydroxyapatite nanoparticles by sol-gel method with optimum processing parameters

Aqueous Preparation of Highly Dispersed Hydroxyapatite Nanorods for Colloidal Liquid Crystals

Sol-Gel Synthesis and Characterisation of Nano-sized Hydroxyapatite Powders and Hydroxyapatite/ Poly(D,L-lactide-co-glycolide) Composite Scaffolds

Synthesis and Characterization of Fluoridated Hydroxyapatite with a Novel Fluorine-Containing Reagent

Sol–gel derived porous hydroxyapatite coatings

Nucleation and growth of hydroxyapatite nanocrystals by hydrothermal method