Abstract:Numerical simulation of a direct methanol fuel cell (DMFC) operating under discharging conditions is challenged by the difficulties in modeling of complicated liquid–gas two-phase flows and coupled electrochemical kinetics. Under open-circuit conditions, the net electrochemical reactions in the DMFC anode cease, but, owing to the methanol concentration difference between the anode and cathode, the mass transport of methanol remains, creating a mass transport process of methanol in a single-phase liquid flow with no electrochemical reactions in the DMFC anode. Consequently, an accurate simulation of mass transport of methanol under such open-circuit conditions becomes possible. In this work, we performed a 3D numerical simulation of mass transport of methanol in the DMFC anode under open-circuit conditions and obtained the mass flux of methanol through the porous layer for different values of permeability. We also measured the mass flux of methanol permeation from the anode flow field to the cathode under open-circuit conditions. The comparison between the numerical and measured mass flux of methanol made it possible to in situ determine the permeability of the typical commercial porous layer. Using this in situ determined permeability, we then investigated numerically the effect of methanol feed rates on mass transport and found that the in-plane under-rib convection plays an important role, even at low methanol feed rate, to make the reactant evenly distributed over the entire catalyst layer.

Numerical Simulation of μDMFC Performance

The Effects of Different Flow Channels on Silicon-based Micro Direct Methanol Fuel Cells

Numerical Simulations in a Three-dimensional Model of Direct Methanol Fuel Cell Anode Using Computational Fluid Dynamics Method

Numerical simulation of heat transport in a direct methanol fuel cell

Design and Simulation of Air-Breathing Micro Direct Methanol Fuel Cells with Different Anode Flow Fields.

Investigation Of Mass Transport And Cell Performance On Mu Dmfc With Different Anode Flow Fields

Numerical simulation on mass transport in a passive vapor-fed direct methanol fuel cell operating with neat methanol

Numerical simulation for rib and channel position effect on PEMFC performances

A model investigation of the performance of a novel anode flow-field structure with microblocks for micro direct methanol fuel cells

The Effect of Different Flow Patterns on Anode Fluid Behaviors of Micro Direct Methanol Fuel Cells

The role of under-rib convection in mass transport of methanol through the serpentine flow field and its neighboring porous layer in a DMFC

Design, Fabrication and Testing of an Air-Breathing Micro Direct Methanol Fuel Cell with Compound Anode Flow Field

Experimental Investigations of the Anode Flow Field of A Micro Direct Methanol Fuel Cell

Hydrophilicity effect on micro-scale flow of µDMFC

Transport Phenomena and Numerical Simulation Related to Water in Direct Methanol Fuel Cell

Performance analysis and multi-optimization of direct methanol fuel cell based on a novel numerical model considering mass transfer

A Numerical Study on Microfluidic Fuel Cell: Improving Fuel Utilization and Fuel Operation Concentration

A Three-Dimensional Full-Cell CFD Model Used to Investigate the Effects of Different Flow Channel Designs on PEMFC Performance

Modeling and Simulation of Tubular Direct Methanol Fuel Cell

Numerical Simulation of Transport Phenomena in Proton Exchange Membrane Fuel Cell with Multichannel Serpentine Flow Fields

Investigation Of Corner Effect On Micro-Scale Flow Of Mu Dmfc