Abstract:Cold expansion is an efficient way to improve the fatigue life of an open hole. Knowing the stress fields of cold expansion hole and influencing factors is very important to key components designing, manufacturing, and fatigue properties assessment. In this article, four finite element models have been established to study the residual stress fields of cold expansion hole, experiments were carried out to measure the residual stress of cold expansion hole and verify simulation results. Four groups of specimens of different cold expansion level are examined by fatigue test. The fracture surfaces of specimens are observed by scanning electron microscope (SEM). The finite element method (FEM) results show, with interference values developing, the maximum values of circumferential residual compressive/tensile stresses increase in oinfiniteo and ofiniteo domain, and higher positive stress values are obtained at the boundary of ofiniteo domain. The effects of friction between mandrel and hole surface and two cold expansion techniques on the distribution of residual stress is local, which only affects the radial residual stress around the maximum value and the circumferential residual stress near hole edge. Residual stress fields varying with plate thickness and distributing along plate thickness are observed too. The compressive stresses on the mandrel entrance face are less than that on mid-thickness and mandrel exit faces. Cold expansion processing can decrease the surface roughness of the hole and improve surface quality. The crack always initiates near entrance face, and the propagation speed of crack along transverse direction is faster than speed along axial direction.

FEM Simulation and Experimental Test on Residual Stress of Cold Expansion Hole of Rectangular Plate

Experiment and FEM Simulation on Residual Stress of Cold Expansion Hole

Finite Element Method and Experimental Investigation on the Residual Stress Fields and Fatigue Performance of Cold Expansion Hole

Study on the Residual Stress Fields, Surface Quality, and Fatigue Performance of Cold Expansion Hole

Effect of Thinckness on Residual Stress Fields of Cold Expansion Hole

Effect of Edge Distance Ratio on Residual Stresses Induced by Cold Expansion and Fatigue Life of Tc4 Plates

Effect of Cold Expansion on Crack Opening Displacement and Stress Intensity Factor

EXPERIMENTAL AND SIMULATION STUDY ON EVOLUTION OF STRESS AND STRAIN DURING THE HOLE EXPANSION

Effect of Cold Expansion on Fatigue Performance of Open Holes

Analysis and Simulation of Machining Deformation Resulting from Residual Stress

Numerical Prediction and Experimental Verification of Fatigue Life of TC4 Plate Strengthened by Cold Expansion

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Exploring Further Fatigue Crack Closure in Residual Stress Field through Numerical Simulation

Research on the Residual Stress Field of a Compression Bushing-Lug Plate in Cold Expansion Strengthening

Study on the Residual Stress Distribution of Bi-Directional Cold Expansion Process Performed on Open Holes

Numerical Simulations of the Fatigue Damage Evolution at A Fastener Hole Treated by Cold Expansion or with Interference Fit Pin

Numerical Simulation of Temperature and Residual Stress Fields in Thick Plate EBM Welding

Finite Element Analysis of Split Sleeve Cold Expansion Process on Multiple Hole Aluminum Alloy

Comprehensive Method of Simulation and Experiment in Stress Measurement for Quenching Thick Plate

Numerical investigation of the effect of hole reaming on fatigue life by cold expansion

EXPERIMENTAL AND NUMERICAL ANALYSIS OF WELDING RESIDUAL STRESS IN HIGH STRENGTH STIFFENED PLATES